I have one picturebox, which moves when i start the timer:
PictureBox1.Location = New Point(PictureBox1.Location.X - TrackBar1.Value, PictureBox1.Location.Y)
By default, it can go out of forms bounds, but i dont want it to be able to go out of them
[code].....
I created a custom control that uses a PictureBox and made that PictureBox movable.
I create the control during runtime and the code works just fine. I can move the picturebox, except it can only move within the bounds of the control, which is the same size as the picturebox.
I have a panel that has a label and a picturebox inside of it and I handle the pictureboxes event like so:
[code].....
i need a solution to drag and drop a child control with in the bounds of a parent control means i had a panel with 300*300 pixels and i had to drag and drop a textbox within the panel how
View 1 RepliesI need a solution to move a child control with in the bounds of a parent control means I had a panel with 300*300 pixels and I had to move a textbox within the panel how?
View 2 RepliesI am trying to place // at the beginning of all the highlighted lines, when the user selects 1+ lines, and presses the "Comment" button
vb.net
Private Sub CommentSelectionToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CommentSelectionToolStripMenuItem.Click
[code].....
I want to make a program that will take a screenshot inside the bounds of a rectangle. Is there a way to do this? I don't want to use sendkeys{"(prtsc)"} because that doesn't take a screenshot of only an area on the form.
View 11 RepliesI have this code where I'm wanting to draw text inside a defined rectangle and if it's too wide I want it to be slit onto multiple lines and if it's too tall, I was it to only paint what it can which right now it's not cutting it off it continues on below the bottom border. Here's my
Dim NotesRect As New RectangleF(mMargins.Left + LeftIndent, m_PagePositionSingle, mMargins.Right, mMargins.Bottom)
e.Graphics.DrawString(NotesString, m_ItemFont, Brushes.Black, NotesRect, New StringFormat(StringFormatFlags.FitBlackBox Or StringFormatFlags.LineLimit))
including the runtime error message I receive that keeps killing my application. I am about to pull my hair out because I cannot find anything wrong with the code, and I do not get the error when debugging the application in VB! Basically a user enters some medical information on a form in text boxes and adds some medical conditons and medications into two listbox controls on the form, on for medical problems and one for medications they are on. When Button1 (command button) is clicked, it calls a subroutine stored in a module1. Then the application throws and Index out of Bounds error and crashes, losing all information that was entered. Here is the code on Button1:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNext5.Click
Call Store_MedData
End Sub
Here is the code for Store_MedData in the module. The error occurs on red text:
Dim ClientLastName as string, ClientMI as String, ClientFirstName as string, ClientAddress as String, _
ClientAddress2 as String, ClientCity as String, ClientState as String, ClientZip as String, ClientDOB as String, _
ClientBloodType as String,ClientActiveMeds(frmmain.lstActiveMeds.Items.Count - 1) As String, _
ClientActiveMedProbs(frmmain.lstActiveMedProbs.Items.Count - 1) as String
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. The application is being run on a PC running Windows Vista Home Premium w/ SP1. (aka. Windows "Worthless Edition")
I have a list box that is custom drawn...I was wondering how i can get the rectangle for a specific item (not in the drawitem event) so that i can call (for instance):
vb List.Invalidate(GetItemRect(List, ListItem))
And it would just redraw that one item
In my game, which is just for practice, I have a 2 rectangles one set as the inner bounderies, one set as a sprite, but I want to create walls for my boundaries. So how could I set a string of bounds with this
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress
If Sprite.Bounds.Top <> Wall.Bounds.Top Then
[code].....
I got this error why? Array bounds cannot appear in type specifiers
[Code]...
I am trying to make bounds for a character that can jump. I have made the character graphic into a rectangle and I have a square block in the game that the character must jump onto and I have set that as a rectangle.
How would I make it so when the character jumps onto the square block, he stays up there and then when he jumps down, and touches the ground, he stays on the ground. My current jump code is standardized; it does not detect changes in the Y-coordinate. What I have done in the jump for the character is I have made it so the Y-coordinate is increased by a certain amount and decreased by the same amount so the difference is equal to 0.
For example:
Character.LocationY += 8
Character.Location -= 8
I have been toilign away for several days on a program. I have chosen to start form a fresh with it (using much the same code). However I am continuely being givent he following errors.
Expression is not a method. Line 17
Expression expected Line 17
Array bounds cannot appear in type specifiers. line 31
Here is my
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Processor(5) As String
Dim Clock(5) As Single
[code]....
I know that this was an advanced compiler option in previous versions of Visual Studio, is there a way to disable array bounds checking in Visual Studio 2008? There's no option for it that I can see.
View 1 RepliesI'm trying to get the date and time in the database and see if it has a conflict on the textboxes that I have in my form. I use the DateDiff to see if there was a conflict but instead, I got an error. In vb6.0, I've done this code and there were no errors so far when I run it.
[Code]...
I am trying to split text in a TextBox and I get this error {"Index was outside the bounds of the array."} while using this code
Dim s As String = Me.RichTextBox2.Text
Dim parts() As String = s.Split(":"c)
Me.TextBox1.Text = (parts(0))
Me.TextBox2.Text = (parts(1)).Trim
I am stock, it will work fine for a couple of reads, since the Me.RichTextBox2.Text text changes constanly but every now and then I get the error
I'm having problems with this code. It cycles through but it tries to copy lines that do not exist, and gives and error. I'm searching for a String Character then when I find it I get a Position of the character. Then I convert that character to The Line it is on (I think this is the problem, since it says the character is on a line that doesn't exist)
[Code]...
OK. So I have a class-level array:
Dim terrain()() As Double and I want to add the bounds in a procedure:
Dim terrain()() As Double = New Double(divisions + 1)() {}I can't add the bound for the seconds dimension.
Then I want to assign a value to any element of the array inside the procedure.
terrain(0)(0) = 0.5 This gives the error: Object reference not set to an instance of an object You can see my problem. What solution can there be to this problem that involves one array.
So this code is a section taken from a larger app and its purpose is to read the lines in a text file and place them in certain comboboxes, textboxes, etc. it works great right now except i have hit a snag. line 13 is the name of the project leader who was in charge of the job. However on older files we didnt include that name so line 13 isnt there. So when i debug the app will load up with nothing in that combobox(2) which is expected, but when i hit the update and apply button it errors out saying "Index was outside the bounds of the array" regardless of whats in the box.
Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
[Code]....
I keep getting "Index was outside the bounds of the array." error when I run the exe from Debug and Release, but if I put my parameter -dev in a shortcut I do not get this error.Here is the code causing the problem
Dim cmdLine() As String
cmdLine = Environment.GetCommandLineArgs()
If cmdLine(1) = "-dev" Then 'problem[code].....
I have 2 screens, and 2 forms. I want each form to fill a screen, so I did the following code:
s = Screen.AllScreens
f1.Bounds = s(0).Bounds
f2.Bounds = s(1).Bounds
(s(0) is my primary screen, and s(1) is above it.) F1 fills s(0), but f2 does not fill s(1). The size of f2 is set correctly but the location is set to (50, 0) instead of (0, -1024). Maybe location won't accept negative numbers? If so, how can I get my form to the other screen?
At the line `If aryTemp(1) < aryTemp2(1) Then the Index was outside the bounds of the array.
error appears. Can't identify why would it be outside array's bounds. Basically trying to compare Last Names to sort the records and place em back into list box.A student record looks like this: FirstName[space]LastName[space]Major[space]Telephone[space]Email[space]GPA
[Code]...
I have this code where I'm wanting to draw text inside a defined rectangle and if it's too wide I want it to be slit onto multiple lines and if it's too tall, I was it to only paint what it can which right now it's not cutting it off it continues on below the bottom border.Here's my
Dim NotesRect As New RectangleF(mMargins.Left + LeftIndent, m_PagePositionSingle, mMargins.Right, mMargins.Bottom)
e.Graphics.DrawString(NotesString, m_ItemFont, Brushes.Black, NotesRect, New
[code].....
Error 'Index outside of bounds..'
Structure2
A as string
B as single
public sub structure2Init[code]....
I get Error 9 'Index outside of bounds...' I don't know why ?
I know the node how can i get the bounds as a rectangle for a particular node on a treeview?
If it is not displayed i want nothing to be returned
Another error and I'm not sure where it is comming from:
Structure structHours
Dim StdHours As Integer
Dim OvHours As Integer
[Code]....
Shows i to have a value of 30. Where is this errors comming from?
how to get the array to handle the primaryGroupID for a vb.net console app. Here is what I have so far.array not included as I am currently researching available options(and no one seems to have an available answer on google)
Dim Results As SearchResultCollection = objSearch.FindAll()
Dim objpgID As String
For Each Result As SearchResult In Results
objpgID = Result.Properties("primaryGroupID").Item(0)
[code]....
Every time that to form loads, the tab control loads all information for each element in the array into the tab controls at once, instead of stepping through Error says index outside of bounds of array
Private Sub fillTabControl()
Try
AlbumTextbox.Text = strAlblumNameArray(intCurrentIndex)
[Code].....
Private Sub btnCount_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCount.Click
[Code]...
I'm trying to check if a user is logged on on another computer, but when it runs the check I get the following error.
Error: MySql.Data - Index was outside of the bounds of the array.
Public Function StaatOpenRegLogOpAndereMachineByWerknemer(ByVal RegLog As clsRegistratieLogin) As Integer
StaatOpenRegLogOpAndereMachineByWerknemer = 0
[Code].....
