Hi, i have a regex code to get the time from a webbrowser but there is more than 1 time all in the same format.I need it to get the first time it catches, atm it gets the last time not the first?
Dim Regex As New Regex("d+:d+( [AP]M)")
Dim Matches As MatchCollection = Regex.Matches(WebBrowser1.DocumentText)
For Each Match As Match In Matches
TextBox1.Text = (Match.ToString)
Next
I'm here again asking stupid questions. I don't have really get this but i ask again but i try explain all better. Here is a website link and i want catch string from here. Look page's source code and find first what starts <td> someword </td> I use this code for catch word from page. Visual Basic Express 2008
[Code]...
the regex:
# Region
<tr>
s*<tds+class="grey11">Region:</td>s*
<tds+class="b11s+b">(?<Region>.+?(?=</td>))</td>
s*
[Code]...
I have a program in VB.Net that receives mails from Outlook, extracts attachments and inserts the attachments into a table through a query. I would like to put the query/queries in a Try/Catch block, but cannot do so as Outlook exceptions cannot be caught, and it gives me an error, and unless I put a very specific exception, I cannot catch it. Is there a workaround?
Edit:
Try
Catch ex As Exception
End Try
Exception is underlined and when I hover on it, it says: "Catch cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not in 'System.Exception' or a class that inherits from 'System.Exception'". This is affecting all my other code which I'd like to put into a Try/Catch block.
The following code causes a "Warning" that Variable is used before value assigned.How do I restructure this Try/catch to eliminate error on the myreader.close command in the Catch part? Code appears to work fine but I dont like Warnings. [code]
View 8 Repliesi have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
View 6 RepliesI have this scenario: in a Sub I have a Try...Catch statement.Within that Try..Catch I call another sub.In that 2nd sub is also a Try...Catch.(see below for example).Now if an exception occurs in the 2nd sub's Try...Catch, which Catch gets excecuted? The 2nd one, the 1st one or both?
Private Sub sub1()
Try
..do stuff[code].....
If I throw an exception from within a catch, does the finally (from the catch) still execute? i.e.
Try
..some code with an exception in it...
catch ex as Exception
throw new SpecialException("blah blah" & ex.Message, ex)
[code]....
I need to catch log4net exceptions (its own exceptions not app exceptions logged by it). I wish there's a way of doing it this way: [code] I have this code implemented and there's no errors in compilation but i force log4net to have an error (pointing to a non existing database in the config file) and nothing is threw.I've tried the listener aproach: [code] and it's writing the errors to log4net.txt, the forced ones i mean.This last aproach has a couple of drawbacks: it won't append every error to the file, if the error is the same it doesn't write it, i can't get the listener to write every error to that file, only one (I don't know how to fully configure the trace listener, it might be that). Thus it won't append the date and hour to every line wich is a necesity for me. Finally i can't give structure to it (xml). Even if the listener work i need to use the try/catch aproach, since i'm using ExceptionHandling from Enterprise library to log the errors in my app.
View 1 RepliesI am using VB.NET 2005 to create a Windows forms application. I have a procedure named SendMail that creates an instance of Outlook.Application, to send an email from my application. I found the code on this forum, I think.The procedure works fine, but I can't use error handling with it.I call the procedure from a button click event. I put the procedure call in a try/catch block, and the application won't build, with the following error.
Error 68 'Catch' cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. C:datadevdmtiQTSQTSv7_1_20100212wQTSQTSReportsCriteria
pt_frmReportViewer.vb 43 21 QTS
Here is the code:
Sub SendMail(ByVal sFile As String)
' Create an Outlook application.
Dim oApp As Outlook._Application
[code]....
Explain what these do and how you would use them?
View 11 RepliesI have a form with many textboxes. When the user exit, I ask him if he wants to save it, and if so, I save all data into text (INI) file.I'm looking for best practices how to know if the user changed something with any of textboxes?I know I can use 'change' event for each textbox, and use some global boolean variable to catch it. But since I have dozens of textboxes,I'd like to know if there is any better way?
View 1 Repliesam trying to catch the inner exception for the smtpclass with this code below, but it give another error saying the innerexception is not defined
Try
mail.To.Add(lstRecipients(i))
Try
[code].....
a) If the function returns true OR false will utilising the 'Using/End Using connection' statement close the connection cleanly? b) Is the 'Return TRUE statement' suitable placed to allow an error to occur and be raised returning a value of FALSE?
Public function doSomething () as boolean
Using conn As New SqlConnection(My.Settings.SQLConn)
Try
[code].....
Is there a way to catch ALL errors of the program?
Purpose: The idea is to catch all the errors of the program, load errorform which basically just says "A Error Was Detected" (Which I have already designed). Then send a web request to a formmail.php file with the said error (which i have already done).
In short: I need a way to catch ALL errors, and get the error string that it gave.
i want to know how to use try catch finally statement.i want to catch this error Violation of PRIMARY KEY constraint 'XPKemployee'. Cannot insert duplicate key in object 'dbo.employee'.
View 4 Repliesi have this problem about the try,catch,finally statement... i don't know how to use it..i have my converter program here and this should be type by a letter 'cause if you do it will go lag or hang...i try VERIFY button to make sure if it's a letter or number but my teacher said it's not counted...
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.Text = "Pounds To Kilo" Then
[code]....
I am having an issue where I am using regex.Replace to replace part of a string. The basic idea is that I want to capture the beginning of the string then replace the end of the string with a value from code. For an example pretend I have a string that says "Test Number " followed by number and I want to increment that number. I capture the "Test Number " but when I try to concatenate that capture with the new number it treats the capture ($1) as a literal and replaces the entire string with $1[new number].
[code]...
This will output "We are on Test Number 2", as expected. how I can use a variable in the replacement string portion of the Regex.Replace when including a captured group?
I want to take the text and some special characters between the xml tags.. My input file contains:
[Code]...
now i want the Regex to take text and the special characters between the tags <line>,<inline>..
If i have next items. Button1 & Label1 How i can make button catch information from website to Label1.text?
[Code]...
I don't really meant copy this site or anything this is JUST example site for my topic. I'm not good explain what i want but this is one test.
Is there a way that when using a Try, Catch statment to give details of the sub routine and line that the error occurred? The reason I ask, is that there is a user in a different state who is using a tool, and he is getting some errors. He is getting an unhandled exception message. I can not seem to reproduce the error, and want to know where it is happening, other knowing that is has happened somewhere in the UpdateModelLists.
View 3 RepliesIf I get to a 404 error page on my webbrowser I want it to redirect.
If 'catch webbrowser 404 error Then
Webbrowser1.Navigate ("[URL]")
End If
I have no idea how to catch the 404 error page when it happens though.
I'm creating a database using Access 2007 and Visual Basic 2008.
I'm using the try and catch exception handler in my project. this try and catch are inserted in the Save Record button. here is the code snippet of my try & catch:
CODE:
My problem is that, whenever i add a new record and clicked the Save Record button, the msgbox "Data Update Failed" popped out. But when i recheck, the newly added record was actually successfully saved in the database.
Is there something wrong with my code? The new record is inserted in the database but why does the "Data Update Failed" msgbox was popped out instead of the "Data Saved" msgbox?? I've tried many times but i still cant figure this out. please help.
How do i catch the exception, write to log and then get back into the loop?[code]i want that app keeps running although an exception is thrown.
View 11 Repliesi want to automatically add all the events of the activeform under try catch block.i am using a simple code which puts the selected code of ActiveDocument under try catch ( using DTE.ActiveDocument.Selection )i have to manually select each event's code and apply the macro, which does not seems to be a very good idea.
View 1 RepliesI'm creating a program in VB.NET to output multiple images. Some images will have the same file name. If there is multiple files with the same name I want to add "_1_" to the end of the file name. If the "_1_" file already exists I want to increment the 1 to be "_2_". If this file already exists I want to continue incrementing the number ultil it doesn't exist. So for example "filename", filename_1_", "filename_2_", etc. Here is the code that I have tried
[Code]...
I've been working straight since yesterday trying to get this to work. I'm a noob to RegEx and I've tested out about 5 different RegEx "builders" but each of them require you to navigate through the options to build the Regex...each of them has failed when I try to use them.Is there an application out there free/paid where you select the line you want to grab and the RegEx is auto generated from that highlight rather than having to try to build the line of code? [code]
View 1 RepliesI am currently trying to send Email but am stuck with the GeneralFailure error caught with try and catch. I got the sample code somewhere off the internet last week and modified it when I have the chance.
The following is the code I am working on for now.
Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click
Dim message As System.Net.Mail.MailMessage
Dim mailClient As New System.Net.Mail.SmtpClient("smtp.live.com", 25)
[CODE]...
Is there anything unnecessary, missing or am I on the wrong track? Right now I am trying to test send a mail from hotmail to gmail or another live account. Also, I have tried searching through the internet for a solution and some said I need to have IIS which I had it installed for it to work. Another said I need to add a reference but did not specify it. Those were pretty old messages though.
i have this
Dim wc As New System.Net.WebClient()
Dim p As New System.Net.WebProxy()
Dim test As String
wc.Encoding = System.Text.Encoding.GetEncoding("utf-8")
p.Credentials = System.Net.CredentialCache.DefaultCredentials
wc.Proxy = p
[Code]...
[URL]
View 4 Replies
