VS 2008 - Show Only Row With Empty Column
May 17, 2009is there a way to show in datagrid only those row that has column that is empty, im using this code
Me.DataGridView1.DataSource = ds.Tables("0").Copy() but it shows all the data from my table.
is there a way to show in datagrid only those row that has column that is empty, im using this code
Me.DataGridView1.DataSource = ds.Tables("0").Copy() but it shows all the data from my table.
What is the best datagridview event to use these codes I want to check column 0 is empty or has some value
If e.ColumnIndex = 0 Then
If DataGridView1.CurrentCell.Value = "" Then
MsgBox("Empty Value")
[code]....
[Code]....
IF cursor leaves column 0 and row 0 then it displays msgbox but I want to check where column 0 and row 0 has value or empty In case of empty cell it must display msg as
msgbox("this is empty cell")
Add persistence to multible DataGridView in terms of Hide/Show column and column width
View 1 RepliesI've got a grid view. I want it to say "you have nothing to show" if there are no details.
Protected Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles GridView1.RowDataBound
If GridView1.Rows.Count = 0 Then
[Code].....
However; it seems to be working backwards and showing the message when there is data to display in the gird view and continues to be a blank page when there is not data to display in the grid view.
I've tried a variety of combinations with the below IF statement below but no success.
I have a form reading from an Access file now everything seems fine until i go to add record if i then press the first Btn or pre Btn without entering any data then it gives me the error Column 'Membership ID' does not allow nulls. [code] i have been trying to get it to show a msgbox saying the box cannot be left empty but so far no luck.
View 4 RepliesI have the following code and I want to say that if the datagridview - dgvImportData is empty then say this message otherwise say the other message.
View 4 RepliesDim Comp = From C In db.Table1 _
Select C.Completed, C.Taken, C.Namne
Datagridview1.DataSource = Comp
Am using the Entity Framework and Columns Completed and Taken are of bit Datatype. When the query results are displayed in the datagridview, these bit columns are returned as of ColumnType Textbox - so i get a Datagridview textbox column with true or false string values.
I want to display Completed and Taken as Checkbox columns (either ticked for True or un-ticked for false) but ofcourse i can't do this in EditColumn dialogue because the Datagridview is unbound.
how can i change this in code at runtime
I'm fine with both C# and VB.NET..I have two tables. Authors and Books. It's a one to many relationship, Authors to Books. I'm writing a query to show how many books that each author has.[code]But in the Authors table, there are some authors without any books yet. For example, there two authors, Author D and Author E that have no books yet. I want to write query that includes all authors and number of ther books, even though they don't have any book yet, no record in the Books table yet.
View 1 Repliesi post a new thread with same in my previous topic Using If Statement. If my textbox is empty or no value then clicking a button will show a message box..and if trying to put a value will do event.inserting a record. all i need to know how can i make it that thing.if i try to load without any if statement and trying load it btnok will load a insert record. Just like a LogIn form that will pressing a ok button with no value will display a message box Invalid Username
[Code]...
I have the following form and I'm trying to add a error to the page that if the recordset = 0 then there is a message on the web page stating that there were no results. What's the best way to do that?
Imports System.Data.SqlClient
Imports System.Data
Partial Class _Default
[code].....
We are bysy with making a crystal report in vs2005 / 2008
We want to print the address of a bussiness, see picture-1.jpg
If field-2 of the second record isnt filled in we get the the result see picture-2.jpg
In the crystal report we don't want to show the empty information of field-2, see picture-3.jpg Is it possible to create this in a crystal report?
i want to check the table column null or empty......in vb.net iam using ms access in backend.....
View 2 RepliesHi, Is there any way to check which row of the value(any of the Column) is empty and get the row number??
View 4 Repliesi have made a button that opens a msgbox dialog what i need is to make it show a msgbox with an empty textbox inside and an ok cancel button,so when a user clicks it,it appears and asks for an url string and then,if uses pressed ok,the url should be placed as a movie to axshochwaveflashobject like this Private Sub FromUrlToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles FromUrlToolStripMenuItem.Click If FromUrlToolStripMenuItem.Pressed Then MsgBox("emptytextbox",title "Enter the url") If MsgBoxResult = ok Then AxShockwaveFlash1.Movie = "msgbox answer"AxShockwaveFlash1.Refresh() End Sub
View 6 Repliesnew with Linq and very excited with this feature. However, I want to see if I can do the following with LINQ:
[code]...
Notice that I have a break in my foreach loop, meaning that I just need to reset the first match row's column value to empty string.
I am trying to get this to iterate and append the items in my listbox, which are single column excel files into a single sheet. However, for some reason its placing my second data set out in the bottom of the sheet. I feel like I'm probably missing something very basic here and I've been looking at for to long this afternoon. I used to create this worked splendidly in some other applications I've been developing.
vb version is 2008 VB express excel version is 10.0
Code:
For Each filename In ListBox3.Items
If System.IO.File.Exists(filename) = True Then
xlBook = CType(xlApp.Workbooks.Open(filename), Excel.Workbook)
[Code].....
I am using TextFieldParser to Read a Tab Delimited Text DataFile. The problem I have is that some times the data file (3rd party provided) contains an extra Tab which therefore creates an extra column. I need to remove this unnecessary column. Some columns will have rows that are empty so I cant just delete the column if it has a blank row, So I think I need to loop through each column and if if every row is blacnk then delete that column.
Here is the code that reads the file, I was going to remove the column from the table called table before I populate the table called dtAll , which is what my program uses
Dim safeFileName As String = IO.Path.GetFileName(Me.OpenFileDialog1.FileName)
Using myReader As New Microsoft.VisualBasic.FileIO.TextFieldParser(safeFileName)
myReader.SetDelimiters(vbTab)
Dim currentRow As String()
[Code] .....
Ok i have a weird issue. I cant figure out what to use... CSV has two colums :-Name, MobileJohn Doe,60002000Jane Doe,Now i would like to delete the whole line if mobile number is empty.. i cant figure out what to use. Mobile number are 8 digits long.
View 11 RepliesHow I can show header/footer of Asp.Net Gridview with empty data source?
View 1 RepliesMy requirement is to read all rows of an excel-sheet in first column that are not empty, are numeric and have a length between 15 and 20.
For example:
358218033354974
359473035499561
358218036156129
354022038366247
358218032490035
359473030516492
353210040325399
This column might have a header that is not numeric and there might be empty rows. This would cause an exception when importing them via SqlBulkCopy. So i want to prefilter the correct rows via OleDbCommand.
What I have tried so far is following(C# is also appreciated):
Using connection As New OleDbConnection(sExcelConnectionString)
connection.Open()
Dim schemaTable As DataTable = _
connection.GetOleDbSchemaTable(OleDbSchemaGuid.Tables, _
New Object() {Nothing, Nothing, Nothing, "TABLE"})
[Code] .....
But this throws an exception if there are empty rows or the format of the value is incorrect. So my question is: How to restrict the rows of OleDbCommand to:
Get only first column of every worksheet
All values that are numeric
Skip empty values
Ideally only the values with a length between 15 and 20
Any way how to skip the empty rows, Or do I have to to select the whole datatable? I hoped it would be possible to do that only with one query because of performance reasons.
I try to hide the radio button if the cell is blank but the radio button still show even the cells is blank. why the radio button will not hide?
Dim temp As String = questionDetails.Rows(3).Cells(1).Text
If temp = "" Then
Option3.Visible = False
[Code].....
How to apply for loop on grid view and to check the empty cell value then show a message...
Dim cnt As New DataSet1.LibraryDataTable
For i As Integer = 0 To cnt.Rows.Count - 1
For j As Integer = 0 To 5
If GridView1.Rows(i).Cells(j).Text = Nothing Then
GoTo e
ElseIf GridView1.Rows(i).Cells(j).ID Then
GoTo a
End If
Next
Next
e:
lblmsg.Text = "he is not return a book"
a:
lblmsg.Text = "he is return all book"
I need to sort a DataTable or DataGridView by a column that is a string value, but with null/empty values at the BOTTOM when sorting ASCENDING. The DataTable is NOT populated by a SQL statement, so no order by. If I do
[Code]...
why this code returns the property names as column headers and empty fields?
Dim table As New List(Of SalesPersonClass.SalesPersonClass)
Dim i As Integer
For i = 0 To salesPeople.GetUpperBound(0)
table.Add(salesPeople(i))
Next
dgSalesPeople.DataSource = table
I need to sort a DataTable or DataGridView by a column that is a string value, but with null/empty values at the BOTTOM when sorting ASCENDING.The DataTable is NOT populated by a SQL statement, so no order by.If I doDataGridView1.Sort(New RowComparer(System.ComponentModel.ListSortDirection.Ascending))then it throws an exception, saying that the DataGridView is DataBound, which is correct, but doesn't help me, and I want to keep it databound.
View 2 RepliesI am wondering if data grid automatically shows a first column (empty) before the others, if that can be edited out.
View 14 RepliesI am trying to write a code for excel so that it generates results in the last empty column on the sheet. below is a sample data of what is there:[code]
View 3 RepliesHow can I set the column width and leave the top 10 rows empty in order to insert an image into my Excel report?
Here is my code:
If ComDset.Tables(0).Rows.Count > 0 Then
Try
With Excel
[code]....
In a repeater is it possible to have a field only show once and then again if it changes?What I want it to look like
Audio
- Thing
- Thing
- Thing
[code]....
They are going to be ordered by Type either audio video picture but I don't want to have repeat Audio Video Picture as well.