I've created simple modeless dialog box that show a progress bar, plus an ok button. It works, except that the "OK" button doesn't display until the progress bar is filled. My dialog is name frmProgress and I'm using:
CODE:
Is there a way around this?
im just been browsing the internet for modeless prograss bar like the one in my documents (See Photo)i want to create my progress bar like that through a combobox search for my application
View 5 RepliesIs there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
View 3 RepliesIs there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
View 12 RepliesIs there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
View 6 RepliesIn form I have one button which has functionality to pick up some data from (by mouse click) Parent application.
I have handle for parent application handle, but even if i tried to bring it on top i am not able to do selection because form is modal.
Requirement here is open modeless dialog and wait till it close. other wise it goes further and executes functionality below.
Another option can be open form as modal and at runtime change it to modaless.
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI have a simple desktop application that uses a .NET setup project (.msi file) to perform the installation. On the first installation, everything proceeds in a timely fashion with good feedback for the user.The problem occurs when the user is installing the latest version of the application over an old version on their machine.There is an unacceptably long delay of about 60 to 180 seconds from the time the installer's 'Welcome' dialog [It's not the Welcome dialog, I've removed that from the Start section of the setup project and replaced it with a CheckBox dialog to ask if the user wants a shortcut on the desktop] disappears until the 'Progress' dialog appears. The user sees minute(s) of blank screen and thinks the install has stopped or failed.
In the setup project properties, I've got the 'DetectNewerInstalledVersion' and 'RemovePreviousVersions' properties set to true. So, I believe that while nothing appears to be happening, the installer is actually removing the old version. The 'Progress' dialog does not appear until the new version begins installation.I've been trying to either:
a) Get the 'Progress' dialog to display immediately after the 'Install Icon' dialog disappears
b) Show another dialog while the Uninstall is running to let the user know that the setup is still running and everything is OK.
I have been unsuccessful with both methods. I'm using VS 2008 SP1?
I have 1 form with the progress bar and 4 buttons with the following code. I would like to create another form that shows the same progress bar with the same progress. [Code]
View 1 RepliesI copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
get the progress bar show the progress of the batchfile running in the background?
View 10 RepliesI have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesI am using the DownloadDataAysnc. But the ProgressChanged event doesn't show progress until after the data has been downloaded.Even when I try and download a data which is contained in a big file. The programs remains responsive so I know it is doing something.However, it is when the progress has completed that the progressChanged event fires.I known this as the progressChanged and the DownloadDataCompleted fire immediately after each other. However, they should be a pause as the file is quite big.This is the code snippet I am currently using. And the output below
Results:
Progress changed Version userstate: [ Version1 ]
progressBar1.Value [ 100 ]
[code].....
I working on a project wherein i need to merge 2 or more files. but while the program is running or doing the specified descripted job. it seems to be standing still, which may confuse the user that application is not working or not responding. so i want to add a progress bar or anything related to show that the application is still running. can someone explain or tell me how to add this in my program. can you explain me with a simple program or something.
View 1 Replieson page load i have a listbox which gets populated with the subfolders of a folder, im trying to have it so a progress bar fills as each item is added but im not having any luck with remembering how to do this And googles not been to helpfull.Heres my code so far:
vb Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ProgressBar2.Maximum = ListBox1.Items.Count
ProgressBar2.Minimum = 0
ProgressBar2.Value = 0
[Code]...
i have form1 and form splash..i used the splash as processing indicator i place gif in the splash form...and in form1 i call the splash in separate thread..
like this..
Dim splashthread As Thread = New Thread(New ThreadStart(AddressOf SplashScreen.ShowSplashScreen))
splashthread.IsBackground = True
splashthread.Start()
[code]....
now,my problem is when form1 is loaded and click button process in it..the splash form will not display modally...is it because i called the splash in separate thread?..
In the app I'm currently making, I have two progress bars. One for current task being committed and the other is for overall progress.During runtime, I calculate how many tasks are being run and set that as the maximum. As each task completes, the progress bar is incremented by one.
I want the current task progress bar to show the progress of the current task. Some tasks can take a few minutes to complete so that progress bar works great. But, if the task is super quick, like editing registry keys, I see no progress at all.When I edit the registry, it basically goes like this:
'Edit Key
'x
'x
'x
ProgressBar1.PerformStep()[code].....
It completes so quickly that I never see the bar even move.I also have each task report its name into a label and it skips ahead so quickly that I only see the first task name and the last.Is there any way to make this do a better job at reporting the progress?
I came across a problem in my program it takes too long to calculate the values needed (about 10 sec) .But thats not the problem you don't know when the program is working or not, as it just locks up until its finshed and I view that as a problem.
I need to be able to show the progress of this .I looked at using background Workers but I get exception "Object reference not set to an instance" I believe this is because the background worker cannot write values or something ,As it works will a normal handler.
[code]...
I'm using a DLL in vb.net 2005, and this dll show a messagebox with OK option. I would like to close this Messagebox by code.
I was investigating to use SetWindowsHookEx, but I can not detect it. Is it possible to don't show any dialog, or detect the dialog using the dll name?
I'm trying to make a simple Windows form app that does things. I'd like a box to show the progress of each step as it's doing these things. Sort of like a console output, except not on the console, but in a display box that is non-interactive to the user. What thing in the VB.NET toolbox do I use?
View 1 RepliesI'm not sure if this is the right forum or not for this, but I'll post here until I hear otherwise. This had really become a problem for me and I can't seem to find an answer. A lot of my programs will export data to excel. When the wokbook is saved it will popup a save dialog box with a progress bar and a cancel button. The problem is the dialog box loves to steal focus. This causes a problem when for instance right now it is modifying several work books and when I'm typing I could end up hitting the space bar when the dialog box steals the focus and it will cancel the save. Is there some way to prevent the dialog from showing?
For an example this is some quick code I threw together. I have several workbooks that have more data than I need to archive. So it goes into each one and deletes those excess rows. The workbooks are in 2003 format, but I'm running 2007.
[Code]...
How can i make a button that download a file using http show a progress bar about the downloading file state?
View 10 RepliesI am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
frmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
I want my program to copy a file or two from a folder in the directory of the program to a given directory. I also want a Progress Bar for this. I am not too great at this stuff, so I am not even completly sure where to start at to do this. Edit: Not sure if this is possible with VB, but is it possible to just Download it to a given directory instead and show a progress Bar?
View 5 RepliesI need help getting a progress bar to show percent in it. I want to have the percent in the middle of the progress bar, like is sometimes seen in a few programs. I have googled this, and can't find anything. I found something on The CodeProject, but it was just a label and drawing a rectangle behind it. I would like the actual progress bar that is available through the toolbox.
View 5 RepliesI have 1 form with the progress bar and 4 buttons with the following code.I would like to create another form that shows the same progress bar with the same progress.Here's my code for progress bar....form load code is:[code]....
how do i get that progress bar to be show in another form?
If form2.ProgressBar1.Value < 100 Then
ProgressBar1.Value += 20
End If
I'm trying to do a form while a background process is running. Similar to a progress bar but not a progress bar. We have a form that has an animated gif (customer request) and that's it. no other controls. They want this form to show while the processing in the background is running. I try to do this but when the progress form is shown the animated picture is not shown and a white blank space is shown instead of the animated pic. How can I do this? It looks like the BW would work, but i'm not understanding how.
View 3 RepliesI'm done using a data validation....using Litre and Price By putting a Litre and Price and save to database access...and now with my Progress bar i want to read what i want to put into a Litre to show on what is the value..By putting a Litre , I want to know how many gas left by using a progress bar.
View 26 RepliesIs there a easy way to show some form of progress bar on your form in ASP.NET that the code is busy running in the background (meaning thinking)? Like the default I.E have the small little window on the top that moves when its thinking
I have done this before with Ajax but its alot of work and my site is not a Ajax enabled site.