Well I'm using VS2010 and I'm still fairly new at it, and with the databases in it. So here's what I'm trying to accomplish, and it too is also very basic I'm sure, but I haven't been able to figure out the few lines I need to accomplish it.
I have a generically database (Database1) and the generically names dataset (Database1DataSet) along with a table names Ruler_Information (tableadapter and bindings for this table). I have two text boxes named Ruler_NameTextbox and Ruler_PasswordTextBox. I want the database to accept these two textboxes as inputs for a new row. Here is my code, it obviously doesn't accomplish what I want, that's why I'm here:
I am trying to update my access database after changing one of the values of a dataset I loaded from it..[code]I already created a dataset called "Address" using the DataAdapter.fill method. Name and ID have values assigned to them in my program and ID corresponds to the ID# in my Access database.I receive the following error:Dynamic SQL generation is not supported against a SelectCommand that does not return any base table information.I am completely new to working with databases
I am currently developing an application that is linked to a MS SQL Server 2008 Database. So now I realised that I needed to make a few minor changes to the database (add new columns to some tables, change the data type of a few columsn in some tables). After making the changes, I realised that these changes have not been updated in my VB application's dataset. I then tried to "refresh" the dataset, but it still is not updating the dataset. What do I need to do to update the dataset to reflect the changes in the database?
I'm developing an application where depending on a textfile input i should update/insert some data into an Access database. Let;s say I'm updating the bookshelf of a book according to a textfile that goes like:
TEXTBOOK | BOOKSHELF 000000001 | 000000000A and so on
[Code]....
does that make any sense? What I'm trying to do is basicalle: check if a book exists, if yes, then attach to Dataset, change its Bookshelf to the one in the textfile and repeat until the file is completely read. The Bookshelf can or not exists, if it doesn't then it should be inserted, is it done automatically when I update the Dataset? Finally "Batch update" the whole Dataset.
vs 2010, vb.net My program uses clickonce to automatically check my website for an updated publish, and then download and install if a newer version exists. I have been publishing my updates with the database excluded because if I include it, it overwrites the user's existing database with a new empty database.
My issue is that the new version of my software needs to have additional columns added to the existing database so that the user can save additional information. For example, the previous database table allowed saving client first name and last name, but the new version needs to have a new column for "address".
Is there a way for me to add a permanent database table or add a column to the user's existing database table without overwriting their current data?
using visual studio 2010. I have a vb.net application that needs to be updated periodically. The software stores client lists in a database for the user, but when the user reinstalls the program after I send them an updated publish, the client list database is replaced with a fresh empty database.
Is there a way that the user can reinstall the software without losing their current database?
I don't know if I need to somehow make separate publishes. One for an initial install to set up the database, and then one for updates that leaves the client database untouched? I don't know how to go about it.
I'm new at vb.net programming so be gentle. I have the flowing code
Dim dAdapter = New OleDbDataAdapter("Select * from items", dbConOra) Dim dTable = New DataTable() dAdapter.Fill(dTable) BSourceItems.DataSource = dTable DataGridVew1.DataSource = BSourceItems
I do apologise if this has been answered 9000 times already. I have looked over forums and google for days now. I want to connect to an sql database (created locally in the windows form project) i want to then interact with this db (add, update, select) however i am struggling with the connection string (server:? localhost?) the update functions (tableadapter.update(dataset)?) adding new information (newrow etc).
When a vb project is connected to ms access(DB) whenever u make any changes in d db using addNew or insert or delete follwed by update command the changes are reflected in copy of original db in the debug folder of our project.in which updated values chnges with each run .. no changes are reflected in d original db.is dere any command to make dese changes permanent.
My program connects to a Mysql Database. It allow registration and login. I Need this to update the "BankACCid" column(?) in Mysql for the current logged in user.This is the code that doesn't work
MySql Connection Dim conn As MySqlConnection conn = New MySqlConnection()
I'm using a MS Access 2007 database. I modified the field definition of one of the fields in a table, it a text field and I change the maximum length from 40 to 150. I have a data source in my app that contains this table and many others. I refreshed the data source but the change didn't take affect. I went through configure option but the change still didn't take affect. It gives me this error, The value violates the MaxLength limit of this column. If I add/delete a database field the data source is updated when I go through the configure process. I finally just deleted the table from my data source and then added it back.
i try to make a program that can share a database to other people using a upload/update system but when i try to download/upload it keeps saying mdf file in use how can i make the code so that it Uploads and overwites the file without that error.as it must be so it must upload to my server (build in)and download (also build in)the error gives file in use constandly how can i fix this issue?of that file in use problem. even when these no querry or other code running?
I am fresher in vb.net but I have experience in vb 6.0. But I want to connect database in sql server through sql connection. In that case how to create connection with window or sqlserver authintication mode and how to add or update new record in data base in batch transaction. Please help me with sample code. So that I can understand eassily.
is there a way to update a database row with the update command by first defining all parameters and then all values just like you can in the insert command? "insert into table1 (parameter1,parameter2,....) values (value1, value2,....)"something like "set table1 (parameter1, parameter2) values (value1,value 2,...) where ...."?because I only know the syntax to define each parameters value "set table parameter1=value, parameter2=value2... where"
This program is very difficult for me, but I must get threw it or I cannot finish... What I am doing is making a Database of foreign Languages with the spelling of the words and the pronounciation inside the database... The USER enters a paragraph of words into the translator textbox and pushed translate. The program has a DATABANK of words with the phonetic spellings and matches the word, then translates to phonetics. The problem is that new words keep appearing inside the language. So I incorporated a Database of 2 fields
I created a dataset and i am using OleDbDataAdapter to insert new values to access database. But when i close the program and after open it, values are not in the database. How can i solve this problem? Also, i have another problem. When i write codes that
i want to update my inventory table in database from another database name. Example: In VB, i had a form named Orderform. User need to select e product that they want and key in the quantity. all these information are able to store inside my database named ORDERTAB. but now the problem is i wanted to update another field in my database named INVENTORY by minus the quantity tat the user had key previously. i totally had no idea how it going to works.
Syntax error (missing operator) in query expression '''system time'''.this is the error that appears
this is my code:
Dim sqlCmd As String Dim x As Date x = Format(Now(), "General Date")
[code].....
the fields in the tables are all text fields.is there any way to fix this error? perhaps it is in my query but i really cant find a solution.is there an alternative to get what i want my program to do?it is basically entering an ID number and finding the record with the same idnumber and putting the system time on the timein field for that record.
I got a system which i want to insert, delete, update the data into my database and the data from database will be display using datagrid. The below is the coding for one of my button, delete.
Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click Try btnSearchEmpNo.Enabled = False[code].....
Now I wanna set when user click on this button to delete a employee (for example) then the datagrid that i have in my application will not show the data of the deleted employee but in the background, the employee haven't been deleted from database.The employee only will be deleted from database when the user click on SAVE button.I know this application have to use RowState but how?
I figure why this happens, and is because of Windows 7 and its permissions. Now I'm trying to fix this. but the code for this is a bit complicated for me. I found on this website an example on how to set the permissions on files. ([URL])
i am just developing a library management system as one of my project. i using vb.net 2010 and the MS Access 2007 as back end. when i save some records into my database through my application it is correctly saved and i confirmed it through opening the relevant table in the database. but when i restart the application all the entered data were missing..
i have the connection to the database.i have a datatable that stores the info from the database.i just cant seem to get the database to update. the program is a website and when the user clicks submits his account is created. if all the data is verified and the screen name doesnt already exist,a new row in the datatable is created and the info is stored in the correct columns. this is where im stuck. whats the next step for getting the data from the datatable to the database. do i have to insert a row to the dataset and accept again, and then with the database?
Ill start this by saying im still very new to VB, ive had some programming expereice here and there since high school, but never really did much with it till now.Ive got a small app that im working on for a side project, i want to add the details of a given days records from a simple POS system i have built up so far. At this point i have all of the information generated and i cant seem to get the app to commit it to the database. I have seen tons of posts on this, and i have followed a bunch of them to no avail. Im sure this problem is because i have the code written wrong, and i cant get it figured out. Here is the code that im using to try to save the data:
Dim hoursworked As TimeSpan = dtpEndTime.Value.Subtract(dtpStartTime.Value) hours As Double = Math.Round(hoursworked.Hours + (hoursworked.Minutes / 60), 2)
I'm currently working on my A2 computing project, and I am having slight difficulties updating and saving the data in my database when it is entered on a form in VB. I cannot find any reason why it wouldn't work, but if someone could suggest a better way to do it, it would be great as everything else works. It's in the btnsave at the bottom, and when you click the button on the form it come up with a very unuseful error, which is no help to anyone.
This is the code for the edit details form, where on loading, the customers details which are currently in the database are already there, and they can change things on it and save it to update their details if anything changes.
Public Class EditMyDetails Dim con As New OleDb.OleDbConnection Dim dbProvider As String
