The error occurs at: For i As Integer = 0 To txt_load.Lines.Count - 1..The project exists of 2 rtb's. One with a list of lines. The other will be filled with the converted lines. The main reason that I use it is that I want to use the app during the conversion. The second is that I want to learn how this works.[code]
View 9 RepliesIn one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
I'm having difficulty in working with MultiThreading.I want to add to my project a ProgressBar to show the working flow.I'm getting combinations from many Strings, the number of combination can be really big, so it takes few seconds or minutes.
View 6 RepliesI have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
I'm doing my first multithread attempt and I get an error that says "Cross-thread operation not valid..."
Code:
Private Sub btnProcess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProcess.Click
Dim thrMyThread As New System.Threading.Thread( _
AddressOf displayProgress)
thrMyThread.Start()
[Code] .....
cross thread operation is not valid. error is coming?I have two buttons one for showing the panel of split container and another for hide.The error is coming in do work event but only for hiding the panel of split container?
View 4 RepliesVS-2010 i have an application that works great from the visual studio ide on x86 systems(projects build x86) but when i try to run the app from visual studio on my x64 system i get "Cross-thread operation not valid: Control 'gridHistory' accessed from a thread other than the thread it was created on."
main line 58 and 59 are below
dim listform as flist = new flist
Application.Run(listForm)
[code]....
I googled about this error, i found that you need a delegate to go around it, but I dont understand. Here's a Screenshot. Do I need to attach my code too?
View 4 RepliesI have a sub which is run in the threadpool with this command:
ThreadPool.QueueUserWorkItem(AddressOf UpdateStatus)And here's the sub:
Public Sub UpdateStatus(ByVal state As Object)
Dim ini As New INIAccess
If ini.INIRead(GetX_Games, "-1", "Patched", "0") = "1" Then
StatusLabel.Location = New System.Drawing.Point(120, 145)
StatusLabel.ForeColor = Color.Green
[Code]...
I am having a problem that I keep getting the following error when I try to run my program.I am trying to make a circle the size of the value of FrameSize.A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
This is the details of the error:
System.InvalidOperationException was unhandled
Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on.
Source=DreamCatcher[code]......
I am getting some cross thread operations not valid when I am trying to run my code. I am handling a button click event to execute a method that runs a process to do a file converison, when the process is finished I run another method that converts the file to zip format, when that is done I run a method to upload the file to a ftp server, and when that is done I run one final method to update my database and the dataset; however, it is liking the way I am running these and I am getting cross thread errors and an overflow error when calling the fillBy method of my table adapter.
Here is the basic outline of what I have:
Private WithEvents conversionProc As New System.Diagnostics.Process
Inside the click event I call the method:
conversionProc.Start()
Then I handle the exit event of the Process as:
Private Sub conversionProc_Exited(ByVal sender As Object, ByVal e As System.EventArgs) Handles conversionProc.Exited
' Once the Process to convert has finished it will exit - Flag that we created the KML file
kmlCreated = True
[Code] .....
I have created a file watcher but I have a problem with the file watcher.here is the
vb.net
Inherits System.Windows.Forms.Form
Private watchfolder As IO.FileSystemWatcher[code]....
And I have the Following error
InvalidOperationException
"Cross-thread operation not valid: Control 'txtmonitor' accessed from a thread other than the thread it was create on."
I'm getting a Cross-thread operation not valid error when my label text changes - this is very strange because it was working up until yesterday.The only way I can get this to work is by applying the invoke..[code]Is there a more simpler solution or will I have to invoke all my label coding?
View 9 RepliesI am trying my best to figure out how to go about this error i am reciving:Cross-thread operation not valid: Control 'ListView1' accessed from a thread other than the thread it was created on.
I have a backgroundworker thats extracting cells from an excel worksheet and placing them into the listview.
Upon form load i do this:Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Call createListView()
[Code]...
Cross-thread operation not valid: Control 'ListView1' accessed from a thread other than the thread it was created on.I have a backgroundworker thats extracting cells from an excel worksheet and placing them into the listview.Upon form load i do this:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Call createListView()
End Sub
[code]....
The error is on this line:
ListView1.Items.Add(lvi)
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
how to put this on a background worker without getting cross thread errors??? trying to upload a childform object values to an access db.I don't work in IT,Our company's LAN so slow that it takes around 3~5 seconds trying to update/insert values in access using the code below so putting it on a background worker i think makes the app immediately usable once save/upload's called unless otherwise somebody could suggest a faster way to speed things up.[code]
View 2 RepliesCross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 RepliesI need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:
Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub
and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
I am making use of a serial port in a class. I am raising an event from that class to my form calling the class. Event contains data received... I wish to simply populate a textbox from the raised event.Now I am not specifically creating a seperate thread, but I get the normal crossthreading error when trying to update my textbox on the UI, so my assumption is that the serial port and its internal methods probably creates its own threads...Regardless, I am a bit confused as to how to properly implement an invoke, from my main form, pointing to the thread in the instantiated class...
Dim WithEvents tmpRS232 As New clsRS232
Private Sub but_txt_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles but_txt.Click
tmpRS232.Set_com_port("COM8", 38400)
[code]....