VS 2010 .NET Excel Chart Cell Formatting?
Dec 1, 2011
I have a program that creates a excel spreadsheet and a chart on each tab from extracted data in various .txt files. Before the chart is created, two of the excel columns will end up with data like this: on column 9 and 10. I also use data (time, looks like 09:15) in column 11 that shows the time at the bottom of the chart. There are just too many digits in the output and the readability looks bad so I can also convert.
Input Output
800400047320000
825400047120000
[code]....
The chart will display those values just fine but, normally the conversion in code that I do during the placement of that data (so it reads a bit better) looks like this:
'Convert bit to Kbit
If InRate.Length < 7 Then
InRate = CDbl(InRate) / 1000 & " Kbit"
[code]....
how to make the chart work with just numbers and ignore the MB or Kbit at the end?
View 2 Replies
ADVERTISEMENT
Apr 18, 2012
Imports Microsoft.Office.Interop.Excel
Imports System.IO
'btnclikevent runs this code
[code].....
View 5 Replies
Jun 22, 2010
Does anyone have any vb.net or vba code that will format excel values or a range of cells to have comma for 100s, 1000s,10000s etc
View 1 Replies
Oct 14, 2011
I have a chart in Excel that I'd like to use a subtitle on. There is no SubTitle Property on the chart object, so I looked in the Excel User interface and found that you can only create a sub-title by using a text box. The text box looks like its associated with the chart, not the worksheet, so how would I access that text box from code?
View 1 Replies
Jan 21, 2012
When a certain form (containing a datagridview (dgv)) is first loaded, the dgv cell formatting event is triggered by the line
dgv_WorkHistory.DataSource = ds_WorkHistory.Tables(0).DefaultView This successfully adds some background colour to a few cells in the displayed table. After this the next line of code is executed. The problem is that if I then try to load a different table (by choosing one from a listbox), the new table displays OK but without the desired formatting. Why?
Stepping through the code I find first of all that when I click on the listbox the dgv cell formatting event is instantly raised (immediately, even before any code in the listbox click event is executed). Why does clicking on the listbox trigger the cell formatting event?
Then, when execution reaches the line quoted above for the second time (remember it triggered cell formatting the first time round) it doesn't this time trigger it. The next line of code is executed instead. Why has the behaviour changed?
View 1 Replies
Oct 30, 2010
I have an excel file that analizes the info on a SQL database. we have generated a few charts and now I want to be able to display them on a form in VB 2010I searched the web for info but the solutions I've found do not work and my guess is because they are for earlier versions of VB.I have been able to read or even write to the worksheet using this but on the graphvb.net
Dim oExcel As Object = CreateObject("Excel.Application")
Dim oBook As Object = oExcel.Workbooks.Open("C: est.xlsx")
Dim oSheet As Object = oBook.Worksheets(1)
[code]....
View 1 Replies
May 14, 2011
I have 2 spreadsheets I need to read 1 cell from each. I think I am close but you will see the line that doesnt work,
[Code]...
View 6 Replies
Jul 18, 2011
I want to import multiple cell datas from excel and into different labels for each data. Is this even possible ? I have tried out so many different codes but just can't get it . My apologies in advance as i am new at vb the attached file is an example of the data i want to import to the labels.
View 3 Replies
Aug 5, 2010
Basically I've coded an Excel 2007 project in VB.NET 2010 that allows you to create charts with a fair amount of interactivity. I want the user to be able to save and reopen this workbook and still have that interactivity in any already-created charts, so they don't have to re-create them.
When I create the charts, I use Sheet1.Controls.AddChart(...), which returns a Microsoft.Office.Tools.Excel.Chart with which I can handle events and such. However, when I reopen the file and look through the Sheet1.Controls collection, there are no Chart objects. Accessing the charts through Sheet1.ChartObjects.Chart gives me Interop Charts, when I need the Tools Charts.
View 2 Replies
Jan 31, 2011
I'm converting older VBA code to VB. I'm using Visual Studio or VB 2010 but am new to this "oop" approach and not a seasoned programmer. Scenario:
1. Open new Excel worksheet (see below - will this work?)
[Code].....
View 4 Replies
Apr 20, 2010
I'm attempting to copy cells, one at a time, from an Excel 2003 (or 2007) spreadsheet to a Word 2003 (or 2007) table. I'd like the code to be version-agnostic, and so am using late binding. The formatting of the contents of the Excel cell, such as color, underline, strike-through, needs to be preserved. My approach is to use a Word doc as a template. It has a table at the top which I can copy to the end of the doc, add rows as needed, and fill in the word table cells with the data from the excel spreadsheet. Unfortunately, all the formatting disappears. All I get is the text itself.
View 2 Replies
Oct 4, 2009
I have user form that copies data form on excel sheet to anther after the paste takes place.I need to perform a cleanup process. If the cell Value = N/A or the Cell formating is Strike thruIt need to1) Cut the Entire row 2) Shift the Row up3) Then paste the cut row into an anther sheet in the workbook
View 4 Replies
Jul 28, 2011
I have set a column (which is a phone number) in the designer with the following: DataGridViewCellStyle { Format="(###)###-####" }
This seems to have no affect upon the results when it is displayed. It simply displays ########## every time. Where should I set the formatting?
View 1 Replies
May 23, 2012
I am working on a vb6 to vb.net migration project using vs 3.5. I have a datagridview.in a particular cell of this grid, user has to enter only numeric data. but after user enter data, itshould become concainated with a $ symbol (eg: if user enter 34, the cell value should become $34). And if he/she presses the hyphen ("-") in the key board, the data (ie. $34) should become -$34 and if again presses the hyphen button in key board, the data should become $34.
View 3 Replies
Apr 14, 2009
I need to set format of number in workbook cell through function. To do so I use: Selection.NumberFormat = "0.00%" command. The problem is that it works correctly only if called from Macro (subroutine) and give no response if called from Function.
View 2 Replies
Sep 30, 2009
I have and form that Copies form on excel sheet to anther after the Paste takes place I need to perform a cleanup process. I need to cut the entire row, Shift Rows up, and paste it in anther sheet in the workbook if the value is N/A or the formatting is strike Thur. I am having trouble figuring out the code here is where I got to.
'Declared Stuff
Dim wbTemplateSAS As Excel.Workbook
Dim rangevalue As String = LastRowtx.Text - FirstRowtx.Text + 9
[Code]...
View 3 Replies
Nov 11, 2009
I have a cell in a grid view that I want to do custom formatting on. I figured out out to format the cell I'm checking but I want to format another cell called URL. The code below formats the cell "PingStatus", but how do I format another cell in the same row. I want to format a cell called URL .
Private Sub DataGrid_CurrentStatus_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles DataGrid_CurrentStatus.CellFormatting
[code].....
View 1 Replies
Apr 27, 2011
I have created a winform which is having a DataGridView control, based on some condition i am coloring few cells in red color.
' Array MismatchRecords is containing rows and column no. of each cell needs to be colored
For y = 0 To UBound(MismatchRecords)
Dim Row = CInt(Split(MismatchRecords(y), "|")(0))
[code]....
View 2 Replies
Aug 25, 2011
I'm developing application in VB.NET 2008. Whatever I'm formatting cell that should reflect on original value. In Cell Formatting Event, e.Value=format(e.value,"0.0") means it is formatting data but original value is not changing on cell.
But I tried like this
Private Sub DataGridView1_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles DataGridView1.CellFormatting
With DataGridView1
If e.ColumnIndex = 0 Then
e.Value = Format(e.Value, "0.0")
.Item(e.ColumnIndex, e.RowIndex).Value = e.Value
End If
End With
End Sub
It is working for normal datagridviews but if I do the same for databound datagridview , data are flickering... (i,e cellformatting event is executing always). How to change original value of cell in cell formatting event ?
View 1 Replies
May 24, 2012
I am working on a vb6 to vb.net migration project using vs 3.5. I have a datagridview.in a particular cell of this grid, user has to enter only numeric data. but after user enter data, itshould become concainated with a $ symbol (eg: if user enter 34, the cell value should become $34). And if he/she presses the hyphen ("-") in the key board, the data (ie. $34) should become -$34 and if again presses the hyphen button in key board, the data should become $34.
View 3 Replies
Aug 16, 2009
I'm trying to format a column of numbers is a datagridview and I'm having some problems. This is the code I'm using: dgv.Columns(5).DefaultCellStyle.Format = "n2" If the number I put in the cell is 100.50, it shows up as 100.00. If I try to edit it back to 100.50, I get a "value was either too large or too small for an Int32" error. The cell also is accepting Char data. I want to format the column so it only accepts numbers in a '#####.##' format.
View 6 Replies
Aug 22, 2011
I got a code that exports datagridview to excel, how can I format the worksheet in excel through coding in vb.net because I have to include a header before the data in the datagridview nd some data that is in my form in vb.net like the values in my labels and textboxes.
Imports System.Data
Imports System.Data.SqlClient
Imports Excel = Microsoft.Office.Interop.Excel
[code].....
View 2 Replies
Jun 16, 2010
I have a DataGridView bound to a DataTable that has 1+16 columns defined as Integer.The default cell style is hexadecimal 2 digits (.Format="X2").When entering in cell editing I would like to provide to the user, the possibility to write the value in decimal or hexdacimal.Hexadecimal could be written like, for example, 0x00, 0X01, x02, XFF
Decimal like 0, 1, 2, 15For this reason in EditingControlShowing I add "0x" to the TextBox value
Private Sub BankGrid_EditingControlShowing(ByVal sender As Object, ByVal e As DataGridViewEditingControlShowingEventArgs)
Dim grid As DataGridView = DirectCast(sender, DataGridView)
[code]....
View 2 Replies
Jan 12, 2009
I want to make a certain column of my datagridview red based on values from 2 other columns. I have a "HI" column, a "LOW" column and a "Result" Column which are all strings. Now I want to make the result column red if it's values is less than the "LOW" columns value or if it's value is greater than the "HI" columns value. I tried the following code but something is wrong because cells that shouldn't be red are red:
Private Sub dgvTests_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles dgvTests.CellFormatting
If dgvTests.Columns(e.ColumnIndex).Name.Equals("Result") Then
Dim RowValue As DataRow = TestTable.Rows(dgvTests.CurrentRow.Index)
[Code] .....
View 6 Replies
Jan 22, 2009
I have a password column in my datagridview, and I'd like to display the characters as a * while editing and even displaying. I have the following code but when saving to the database the password gets saved as for example.:
Private Sub dgvUsers_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles dgvUsers.CellFormatting
If dgvUsers.Columns(e.ColumnIndex).Name.Equals("Password") Then
[code]....
View 18 Replies
Jun 7, 2010
I would like to update an Excel cell using the cell name, such as "A1", instead of using the row and column, such as (3,2). I haven't been able to do it. Here is the code I used to update the cell by row and column. How would this code be updated so that it updates the cell by cell name instead?
[Code]....
View 2 Replies
May 7, 2012
I have a SQL database, with some "status" strings. For every status I need to display a .bmp image .
I'm displaying the data from the database via DataGridView with LINQ. In order to display the DGV I have this code:
Me.MyTableAdapter.Fill(Me.TestdbDataSet.MyStatusList)
I was thinking to add another column named "Symbol" and based on the "Status" column to format the cells of the "Symbol" column to display an image.
I edited the DGV, and add a new image column.
I created a directory in my solution called "references" where I put all the .bmp files
I don't know how to do this. My first thought was to put an expression in the DataTable Properties, but I didn't manage to make that work. Another way is to format the cells in the "Symbol" column, and again I don't know how to do that. I tried with "Select Case ... Case ... End Select" with no success.
LE: Should I Insert the .bmp files into SQL database (varbinary(MAX)) If yes, how?
View 4 Replies
Sep 21, 2009
From my app I use Excel to make a chart, from values I measure up. The chart is a xy scatter type. The chart is saved as a gif, then imported to a picturebox. how to add a trendline to the chart in Excel from .net.
View 3 Replies
Jun 5, 2011
it is possible to enter values using vb.net and sending it to excel and displaying graphical representation of the values from excel to my vb form?
View 1 Replies
Jan 7, 2010
I am able to place a single series of chart data with my code but I cannot for the life of me figure out how to add a second series. I can add the Series ... I can Select the series but cannot with out errors figure out how to put data the the series' that I am creating ...
Ol' Mitch
xlApp.ActiveChart.SeriesCollection(1).Values = Rng1 <-- Error
xlApp.ActiveChart.SeriesCollection(2).Values = Rng2 <-- Error
[Code].....
View 2 Replies