I'm using PrintForm which comes with PowerPack to print a form with a couple of Labels into it.But the letters appear a little blur and not clear at all, bad quality, I tried by increasing the size of the labels but the result was the same.Under the PrintForm parameters I only found one that could be relevant, the papersize but that doesn't helped too.
View 5 Replies
When I call PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable)Only the visible portion of the screen is printed.What else do I need to dobill
View 5 RepliesI have a login form and a Main Menu Form. I want that everytime I click Login (assuming that I'm in Main Menu Form) Main Menu Form will become blur then a small form for Login will pop up.
View 5 Repliesi am working on Scrollable form, when i am trying to print this form with PrintForm object its printing only the showing part not all the form this the code which am using. Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click Me.PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable) End Sub
View 7 RepliesI would like to make a form that prints the same size as a Legal Form, (8 1/2" x 14") When I check on the internet I see that the pixels can very at 75dpi the form is 637 x 1050 pixels. But at 300dpi the form is 2550 x 4200. Do I have to build the form as per the dpi ratio? I cannot make the form greater than 1612 x 1212. I have tried serching the internet for ways of expanding the form to greater pixels in the height than 1212. I am running Verion 7 of Windows and I am using Visual Basic 2010 Express.
View 5 RepliesHow can I print all labels in my form and have print preview on it? .
View 3 RepliesI have form with text boxes that are collecting data from access database.Now I want to print this, but selectively.I know how to print whole form using PrintForm PowerPack. But I want to print only labels and text from text box.
View 11 RepliesOk, so I done some reading and searching and I am confused on what is the best way to print my form that has 2 labels, 2 richtextboxes on it on get it to print to a 3x5 card or 4x7. I had this built in vb6 and used a picturebox but that method doesn't work in .NET. So what is easier, printform or printdocument or DrawString. I tried the printform but I don't want the whole form printed. Also read about DrawString as well. Honestly, I am confused on all of it.
View 12 RepliesI have been working at printing receipts using printform, but the printer does not seem to be receiving any information from the form. Here is the
Public Sub PrintReceipt()
PrintForm.PrintAction = Printing.PrintAction.PrintToPrinter
PrintForm.Print()
End Sub
When I use the "PrintToPreview" print action, there is nothing shown on the screen.
So I have my main form (Form1) and I have a module called globalMod. On start up, Form1 loads, and globalMod contains functions and global variables (using Friend). I need to be able to have a function inside of globalMod edit a label/text box/etc in Form1. I tired Form1.object.Text = "content" and it doesn't do anything, even if I update / refresh the form.
View 1 RepliesI have created a form that we use for our employee goal setting. I would like to let the users print the form. The form is quite large and has scroll bars. I am trying to use the Printform to print the form. I would like to use autofit or some other type of scaling to get the form to fit on one page. I have done some looking aroung and have seen the following instrutions a couple of times.
1.Drag a PrintForm component onto the Form from the Visual Studio Toolbox
2.Set the PrintForm.BodyContainer property to reference your Form
3.Drag a PrintPreviewDialog component onto your Form from the Visual Studio Toolbox
4.Set the PrintPreviewDialog.Document property to reference the PrintForm component
5.Add a button and button click handler. In the handler call PrintPreviewDialog.ShowDialog()
I don't know how to set the PrintForm.BodyContainer propery (number 2). I am using Visual Basic 2010 express.
the application I'm building is ALMOST done. The ONLY final feature I NEED to add is the ability to receive email. Now I'm using VB 2010. How would I go about doing this? Would I use 2 listboxes and a form with labels on it to display the message. I haven't any code yet. How in the world do I do this??
View 2 RepliesI have a tab control in my Main Form which has 2 tab pages, each of which are a different form. I create them as:
Dim UserManagementForm As New UserManagement()
Dim FileManagementForm As New FileManagement()
Then set them up via:
UserManagementForm.TopLevel = False
UserManagementForm.Parent = TabControl1.TabPages(0)
UserManagementForm.FormBorderStyle = FormBorderStyle.None
UserManagementForm.Dock = DockStyle.Fill
[code]....
I have a PrintForm component on my form and I am trying to send the currently active tab page to the print form and then send it to the appropriate dialog. However, I keep getting the document contains no images. Any ideas how I pass the tab page to the print form component?
I want to make my mainform become blur when a new form is showed.I dont want use opacity property because it can't make mainform darker.I mean opacity only change opacity of form.
View 3 Repliesthe goofiest bloor function that exists in vb.net simillar to saying hello world!No blur hardness no sharp edges or any other settings everything should be default the easiest way to do it.
View 4 RepliesHow can I make background window blur with code.just like when you open regedit in Vista or seven all background changes to black except the prompt window.I want to mimic this behavior but instead of just color black I want it to be the image of the background in blur view. How can I do this in VB 2008?
View 1 RepliesI do remember what I did but text in code windows became very blur.Another screens such as option, solution explorer are still very clear.How to fix it?I tried to reset to reset all setting but no luck.
View 18 RepliesI tried using LockBits to blur images, since I heard it was faster, and there's no error, but there's no blur either. It doesn't do anything. The commented-out code is the code I had before using LockBits, and it works.
vb.net
Private Sub BlurImage(ByVal img As Bitmap, Optional ByVal radius As Integer = 3, Optional ByVal blur_bounds As Object = Nothing)
Dim bb As Rectangle
[Code]....
How to make a picture glow & blur even if the picture contains transparent color?
View 6 RepliesIs there anyway to have a for each statement that gets all of the labels in the form except for a few?example i have
dim x as label
for each x in me.controls
x.tag = randomnumber
next
i want to get every label except for 2 of them (name1 and name2)
I have several label boxes on my design form that all share the naming convention lbl_#.text where # ranges from 1 to 60. I want to make a loop that iterates through each lbl_#.text adding some incremental value, let's say multiples of 2 for this question's theoretical purpose.Something such that the end result would amount to the following:
lbl_1.text = "2"
lbl_2.text = "4"
lbl_3.text = "6"
lbl_60.text = "120"
I'm not sure how to access each of these labels through the coding side, I only know how to explicitly mention each label and assign a value :/
I have a form where I need to place some labels dinamically. Some of the label's height needs to change depending on the string size that will populate the label's text. So what I need to do is position the labels one below the other, after the text has been populated and the height has been set.
View 6 Replieshow to do this. I have a search box at the top of a vb.net windows form. And a bunch of labels throughout the same scrollable windows form. so when a user enters a search term within the search box it will highlight and set focus to the label that matches.
View 4 Repliesis it possible to show 2 labels in a form (one after the other) with the click of a button for example i have label1 and label2 (but label2 is like hidden), the form loads with label and a button when i click on the button, label2 shows....is it possible?
View 2 RepliesI created a program that has serval labels on a form and a listview object. It has a button that when clicked reads a textfile and loads up values in the listview object. I then can click and drag text from the listview box to any label on the form and then the program removes the value from the listview box. Now, my question is how can I instruct VB to save these values in the text property of the labels so that the next time the program is loaded the labels will contain the values loaded during the last run time session?
View 1 RepliesWell im currently developing an application for public use, I have a login screen in which the user enter's their registered credential's and the progressbar loads by increments of 3, now i placed 6 labels ontop of eachother and where the progressbar coding is i put:
If Progressbar.Value >= 1 Then
Label3.Show()
If Progressbar.Value >= 20 Then
Label3.Hide()
Label4.show()
And so on up until Label8 Show at 100%,
Now the problem is... As i have placed the labels ontop of eachother i need them hidden until they are called to show, i have tried adding a background worker to do this but have had no luck, all i see is the labels overlapping eachother when i run my application when i want them hidden untill Label3.Show() is called, and then to display them as they are called and hide them when another one is called to show...
Is it possible to change the ForeColor of all the labels on a form at runtime, including the form which is yet to be called? So that all the labels have the same color throughout the app.
View 2 RepliesPublic Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
Dim vatResult As Decimal
[code].....
I have a form showing a datagrid with info from a database. It also has 2 date pickers to filter the database results. It shows everything perfectly in the datagrid, so the db connection is ok. But it also has a few labels below, showing some info taken from the datagrid. For example, the datagrid has sales information and the labels below show the total sales. This works fine too.But the problem comes when I open some other form, maximize it and then open this form containing all this stuff (while the previous one is still open and maximized). These labels (along with a few more labels that only contain the '$' character) get on top
of the datagrid. Even if I restore the form to its normal size the labels are positioned wherever they want. The weird thing is that this only happens with some labels and not with all of them.My first guess was the anchor property, but I set it to left-bottom and it still does this.
There is an image of a patient on the form.I have to mark the location of wounds on this picture.What I want to do is place 5 labels on a form.I am using these labels to mark the location of the wounds.these labels will be shown on the side of the form.the user can drag any one of the labels to a specific location on the image of the person.e.g face,head,leg.arm etc
Then I want to save the location of the labels in database so that when the record of the patient is retrieved the labels appear on the moved position.
