How do I use line numbers? For example, I'm reading a text file and I'll need to get the line number of the line "=====LINE=====" somewhere in the text file, and I'll need to get the text of the next line (+1 of the previous line, but I'm not sure how to do readline(line number)).
View 12 Repliesshow me a simple code for downloading a file from internet with a URL,Line by Line with streamreader?
View 6 RepliesI came across a post a while back which showed a custom rich textbox control which had line numbers in its margin. Similar to what you woudl see if you we coding in the VB designer and you had your line numbers viewable.
I think it was two controls in one (i.e. two textboxes: one for the numbers, and the other for the text). However I cannot remember where I saw it.
In the code window near the line numbers which are set to show, a vertical band of green exists with a short band of yellow which seems to be near the part where I am entering code.
What is the significance and usefuleness of this?
I have a "Form" with:
1- List Box
1- TextBox
3- Button
1- OpenFileDialog
1- SaveFileDialog
I want that clicking the btn1 it shows the OpenFileDialog and read file that it has got this structure: SKI10 1 71 0 0 18 101 19 0 29 101 30 0 40 101 41 0 50 101 51 0 62 101 63 0 81 101 82 0 95 101 2 0 0 95 165 3 0 1072 01 4 2 1 93 15
I want that it reads all Line of the File and it add an Item in ListBox for line.For example the first Item of the ListBox in this case is
SKI1
And the 2th Item is in this case.
0 1 7
I want using the StreamReader classes.And i want that when i click an Item of the ListBox it shows the Text in the TextBox and I can edit the Line and that clicking antoher button the Item will come updated with new Text of the TextBox.I have also another button for saving the Mod.I can use the AppendText and it create a new file writing ListBox1.Items line for line.
If SaveFileDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then Dim file_esistenteD As StreamWriter[code].....
I am looping through a text file and reading and then parsing each line.. then, inserting into a sql server. The problem is, I am getting every other line. Any thoughts? I read another post on here that is similar and it says that that person was calling the ReadLine twice... which makes sense. I just cannot spot where it is happening.
Private Sub btnUpdateRSR_Click(sender As System.Object, e As System.EventArgs) Handles btnUpdateRSR.Click
' Get RSR File
lblStatus.Text = "Getting RSR File"
Application.DoEvents()
[code]....
How can you make streamreader to split a line into two and place it on two different places of the form and how can you use streamwriter to delete/alter file contents.
View 4 Repliesi need to read a specific line of txt in a filelines 1 and 3 always stay the same ...ishline 2 will change from time to timeits line 2 i need to readi can, using seekorigin cutout line 1 "highlighted", but i want to get rid of line 3 aswellis there a way of just reading line 2? even though it could be 5 words long or 5000?heres what i have so far
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim fs As FileStream
[code]....
What I have stored in my file is values related to an account. (Just testing, not going to be used commercially). What I need is to draw the values for the username and password, by going through each new line, but .peek() doesn't seem to work for me.
My block looks as such :
public string CheckAccount(string username, string password) {
StreamReader sr;
string filename = "H:\AccountInfo.txt";
string s;
string result = "";
[Code] .....
My code doesn't read from the 2nd line onwards, it just hangs.
I want streamreader.Readblock to start reading a file from a specific line, but I need some help with this.so far I have have the following example
[Code]...
I am currently writing a Login Script, and I am having trouble making StreamReader read a specific line in a text file. This is what I have so far (not the entire script, just the reader lines):
Dim path As String = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData)
Dim file As String = (path + "LogDat.txt")
Dim sr As New IO.StreamReader(file)
Dim line1 As String = sr.ReadLine(1) '' Supposed to read line 1
Dim line4 As String = sr.ReadLine(4) '' Supposed to read line 4
Dim line9 As String = sr.ReadLine(9) '' Supposed to read line 9
Not sure what to use or how to use it. But I would like either streamreader or streamwriter to ignore a line depending on it contents.
View 15 RepliesIv just started using a winsock control in VS 2010.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
sckListen.Listen()
sckConnect.Connect(sckListen.LocalIP, sckListen.LocalPort)
[code]....
On data retrieval, it comes out as number instead of text. Im guessing ASCII?Why is it doing this? Do I need to convert each ASCII number into a character?
I am reading text from a file (*.TXT) 1 line at a time using streamreader. As I read that input, I am looking for specific starting and ending character strings ("<" and ">") . When I find those strings, I would like to select the characters between those string and have it set to BOLD and BLUE before appending that input line to the contents of a richtextbox.The only way I have found to do this is to first append the input line to the richtextbox then use the richtextbox.selection (color and font) methods to change the text.
View 9 RepliesI am trying to make a line chart and from what I've read using the chart control is the best way to go about it, but I have no idea how to do that.
View 4 RepliesI have a problem with a streamreader in visual basic 2008.I am updating a database from text files on an ftp server. The streamreader works fine until the file is more than 100,000 bytes long.It reads until it reaches this point and then just ends. No error message, it just reads to this point which happens to be 2 fields out of 6 in the database stream. My question is - does the streamreader have a limit? And if so what is a workaround?
Dim connString As String = "Data Source=" & pDataBase
conn = New SqlCeConnection(connString)
Dim strQuery As String = ""[code]......
I'm writing a program that basically loads an entire text file into a streamreader variable, then reads this variable line by line and parses and writes a line into a new text file. I'm VERY new and my knowledge is mostly self-taught, but I can't seem to get out of this one. It works for smaller files, but it appears to reach a limit in characters at some point because in a file of 900 lines, it stops writing about halfway through 800 and there are no errors, the program actually completes and the message box pops up.
There are a few things with this code I already know I should fix, such as creating the new text file name, it's messy, I just don't know how.
Private Sub btnProcess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProcess.Click
Dim IndexValues As String()
[CODE]...
What is the best method to get towards the end of a file in a Stream Reader. In my case, I have data at the end I want, but the rest of the data I don't need. If the file is very large instead of reading line by line until eof, is there a better way to get to the end?
View 2 RepliesI am using streamreader and streamwriter to read a text file , change the text, then write to the same text file. This all happens in a loop every second or so.Currently I use:
Dim csetpointfileread As New System.IO.StreamReader("C:webcsetpoint.txt")and Dim csetpointfile As New System.IO.StreamWriter("c:webcsetpoint.txt", False)before every file read / write operation, it gets dimensioned every loop. To me this seems like a waste, and should only have to be dimentioned once. If I try to run both statements in the beginning, outside of the loop, the second statement wont work because the "file is allready open". Am I missing something or am I doing it correctly to begin with?
im having problem with this code, what i want it to do it go on the site nd if it finds the word online it switches the text so say it directed to google and the word online is somewhere in the html code of the site, the app should then change label 5 to online BUT i get this error
"Could not find file 'C:UsersOwnerDesktopAMi BETAAMi BETAinDebugwww.google.com'."everything i want the notifyicon to do is working but i only want it to pop up once but every time the timer ticks it pops up
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ServerStatus.Tick
[Code]...
Is there a way, in VB.NET, to output the current line number in the source code? For example:
Try
' The following line will purposly cause an error
Dim BigNum As Int64
[code].....
For example, this:
var Data = new Array(new Array("ASDFGG", "asd_10377142_keyword", 9, 42285017, 10377142, 1), new Array(""ASDFGP", "asd_10377149_keyword",", 9, 42284844, 10377163, 1)... and so on
As you can see, I only need the digits right before the _keyword
I want this action to be on the button click.
How to Add numbers in the margin for Line numbers Picture Provied As a example
View 3 RepliesI have a list of strings in my richtextbox. I need a code to check if there are numbers in the first line, if there is then proceed with the rest of my code, else delete first line.
View 2 RepliesI need some kind of code to check if the first line in a richtextbox contains numbers or not.
Something like this:
If Richtextbot1.Lines(0) contains Numbers Then
Goto startbot
Else
[Code].....
If the first line contains 4 or more numbers, it will use it. After each loop it will delete line 1. So it repeats for the next line. When my code reaches the 3rd line, and it doesnt find 4 or more numbers it needs to delete the line.
Ist : How to Get Current Position of Text in RichTextBox Also The Line Number?
2nd : How to Display Line Numbers In RichTextBox?
I am looking into making a text editor. I would like to include a line number feature. I understand that control creation is a feature of Visual Studio Professional. Are there any possibilities on doing this with Visual Basic 2008 Express. Do I even need to create my own control? Is there something else I can do?
View 2 RepliesIm having trouble with streamreader.. It keeps locking up the debugger after the first 3 lines.. The last line being blank.. There is basically a status readout screen that updates every second or so with statistics about the Video Stream in the FMLEcmd.exe program
View 3 RepliesIm currently using this:
[code]...
I'm trying to show the line numbers with a stack trace when an exception is thown in my app.
This code is in the UnhandledException of ApplicationEvents:
e.Exception.StackTrace.ToString
It currently returns:btnOK_Click(Object sender, EventArgs e) at with no line number at the end.
I have set the project to create debugging info in Project Properties > Compile > Advanced compile options > Generate Debug Info = pdb-Only, and deployed the PDB file with the app, but still I don't get any line numbers.
I'm using VS2008 Standard, vb.net.