Every time I make even a very small change to a form in the form designer, when I try to move off the screen to write code, or run the application, VS 2010 takes up to 1 hour to figure out what the small change was, process it and then let me continue. Is there some fix that I am missing to make VS 2010 be able to handle small changes to the form_designer, or is this just the way it is?
View 6 Replies
I am trying to edit the process memory of a game (Age Of Empires II: The Conquerers). I can edit the memory manually on TSearch and it works just fine. I want to this with VB.NET but have had no luck. Note: I am not doing this to cheat, I am just using this as a learning experience for changing process memory.
[Code]...
I'm running VS2010 4.0.30319 SP1. My WPF project runs once in the debugger, then won't run again unless I wait 30-60 seconds. I've found that in Task Manager, there is an associated vshost32.exe process that starts when I first load the project. It remainswhile the project is running, but exits when I close my app. After 30-60 seconds, the vshost32.exe reappears and I'm able to restart my app. But until vshost32.exe reappears, my app will not run.
View 14 Replies[Code]....
how to change that auto redraw in visual studio since there have an error???
Well I used the Visual Studio 2010 installer to install my application and I want it to be able to change the version displayed in the in the Add/ Remove Programs (in the Control Panel). How can I do this without going through the install wizard again?
View 3 Repliesi just got visual studio 2010 professional edition and it automatically opens up C++ i need it to open up a menue where i can choose visual basic or c++ just like at my college.
View 5 Replieshow to Change VB project code to C# using Visual Studio 2010?
View 3 RepliesI created a VB Console app and it defaulted to .NET 4 but I need it to be .NET 3.5. I've been looking but all the references I find say to change it on the 'Compile' tab in properties but I don't have a compile tab or anything else that lets me change the target framework.
Note: I'm using VS2010 Ultimate
We have upgraded our project from Visual Studio 2008 to Visual Studio 2010 without any issues until now. Our project contains a folder call Libraries which contains different versions of Oracle ODP.NET DLL's as well as different versions of Telerik DLL's. Our project contains references to one of the versions of each. The problem is once we remove the reference and re-add it by browsing to the new version, again inside the Libraries folder inside the project, it adds the reference, but to the same version we just removed. We can even copy the DLL to our desktop, remove the reference and add to the new one on our desktop and it still will point to the Libraries folder version???. The only we we can actual change the reference to the new DLL is by manually changing the path in the .vbproj file, which is obviously not going to work for us. The same behaviour worked perfectly in VS 2008. We switch our references quite often, when new versions come out, but also far more often to QA different versions of ODP.NET and Telerik Control DLL's, so manually editing the .vbproj file is becoming quickly cumbersome. If I browse to a specific version at a specific path, Visual Studio should ALWAYS do what I'm telling it to do..
I did some seaching and came across a few other people with the same issue. This better not be as designed and if it's a bug, which I believe it to be, when will it be fixed?[URL]..
Will i be able to successfully install 2010 beta 2 side by side 2008? because i want to test 2010 features and some development toolkits such as silverlight while i don't want to uninstall my visual studio 2008 professional.
View 2 RepliesDim pList() As System.Diagnostics.Process =
System.Diagnostics.Process.GetProcessesByName("notepad")
For Each proc
As System.Diagnostics.Process In pList
[code].....
This example is posted on the MSDN site, however there is no Process.GetProcessesByName function in VS 2008.
i wan to create a application that can start a process when page load, and a button to hide and show the process.
Dim a As Integer
a = Process.Start("notepad.exe").Handle.ToInt32
ShowWindow(a, SW_HIDE)
i only can start the process, but cannot hide it.any miss take in my code??
my app currently has a process thats ongoing (even when I navigate back to the main screen of my app). Is there any code I can use to terminate all the processes on that page before it navigates back to the main screen. In other words the page should reset to its original form?
View 1 RepliesI'm using Visual Studio 2003, and I have a macro similar to this:
[Code]...
The first time use the macro, it works fine. Each subsequent time, even after I detach from the process, the .Attach() doesn't seem to do anything. The same thing happens as I step through the macro... the proc.Attach() gets called on the correct process, but nothing happens. One note: when viewing the process in the Processes window, the Type column for my process shows ".NET, Win32".
When I load my solution and compile it after first starting the IDE, everything works as expected. After changing source and recompiling, I get the following compile error:
Error 11 Unable to copy file "objDebugCAMDRS.Library.dll" to "binCAMDRS.Library.dll". The process cannot access the file 'binCAMDRS.Library.dll' because it is being used by another process. CAMDRS.Library.
After closing Visual Studio 2005 and reopening the solution I can compile again successfully. This is an old solution that has been fine for a long time. I just recently changed computers and reinstalled everything.I am running win XP Pro sp2, Visual Studio 2005 sp1.
Does anybody know which version of Visual Studio 2010 contains the full set of Visual Basic SharePoint Templates? I am about to embark on a project to create Visual Web Parts to be used in a SharePoint report.
At the moment I am using Visual Studio 2008 and even though the WSPBuilder is installed none of the relevant SharePoint templates are present.Having searched SO and the web, most advise to install the templates via the Visual Studio command prompt: devenv /installvstemplates
Alas the Visual Studio command prompt is also missing from my VS2008 installation.So, the question remains: which version of VS2010 contains what I need for pain-free SharePoint development? There is a rather large price different between VS2010 Professional and VS2010 Premium, so can anyone tell me if the cheaper version (VS2010 Professional) contains all the Sharepoint templates?
I am just wondering how I can add Direct X references to Visual Basic in Visual Studio 2010 Beta 2. I cant find them in the .NET reference list, or the reference list, or anywhere. I downloaded the Direct X SDK for August 2009, but I can not add the .dll files to the reference list. Is there anything I can do to add them? I need the references for programming reasons.
View 5 RepliesI want to use "OpenGL" in my project. Is it possible to associate it with "Visual Basic" application developed in Visual Studio 2010? If yes then how can we do it.
View 1 RepliesI have a project in visual basic 2010 and want to convert it to visual studio 2010 so I don't have to chose the "open with" every time. Is there a tutorial on how to do this?
View 4 RepliesTo reproduce the error I'm getting:Create a new Visual Studio 2010 ASP.NET web site in Visual Basic, targeting .NET 2.0Type "Public Property Test As String" Observe "Visual Basic 9.0 does not support auto-implemented properties." error Visual Studio 2010 is happy to use VB 10 against .NET 2.0-targeted Windows Forms applications, this only appears to be an issue with ASP.NET.Is there a way to force Visual Studio 2010 to use VB 10 when targeting .NET 2.0?
View 1 Replieshave just overlooked something somewhere...I am writing VB.NET stuff in VS2010 on Windows 7 64-bit. It seems to build by default for a 32-bit target, how to I tell it to make a 64-bit executable?
View 2 Repliesif I forget to enter a value in a cell in my gridview a loooong error who says thar that the indata format is wrong. anyone who know where in visual studio I can make this error a bit more understandable for others?
View 1 Replieshow can we change style of form in visual studio?when ever we create any form in visual studio it is always rectangular in shape.if we want any other shape like circle and ellipse than how it will be done??
View 2 RepliesI upgrade my computer to win 7 64 bit and run visual studio 2008, When I try to debug my old dotnet application (orgiinal from XP) it wont allow me to change any code while stop and debug. It said 'Change to 64 bit application is not allowed.
View 3 RepliesI have button that reads "True", When the user presses it, I want it to read "False". I have tried the following but it does not work.
[Code]...
how to change the kerning (space between characters) in vb.net? For example, i would like to change "STRING" to "S T R I N G". If possible i would like to be able to create my own font where i can specify the kerning as i wish!
View 2 RepliesI have defined a class with multiple constructors so that the underlying interfaces are immutable once the object is instantiated. I would like one of the constructors to be the "default" constructor for when a user types the following in Visual Studio:
var obj = new MyClass( Dim obj As New MyClass(
Currently when I go to instantiate the object, the constructors aren't listed (in Visual Studio IntelliSense) in the order I declared them in my class. Is there a way to mark up my constructors so that their methods appear in a particular order during instantiation in Visual Studio IntelliSense?
Ok, so I've got this Visual Studio 2008 Project I was working with about a year ago perhaps. And this project had a datagrid that was linked to an external database running on a server off the internet. Now, this databinding was all done using Visual Studio 2008's built in features. But how can I now change the binding to a different server, without destroying the project? I've noticed that a lot of the code that Visual Studio creates makes a mess. So manually trying to change the datasource has allways f*cked up the whole project for me.
I'm not all that good with this stuff, that's why I used the built in features of Visual Studio. But I noticed that several things appear, like a binding source, and a dataset. Is it possible to do this? Perhaps even better, making these settings be controlled after the program has been compiled. The way it is now, it's all hard coded after compiling, and that kinda sucks. I remember trying to do this about a year ago, trying to bind these settings to variables stored in settings. But I never got that to work. Just throwing around ideas here
WebMatrix is a web development and deployment tool by Microsoft so how is this compared to Visual Studio? which Use C# Razor Syntax is that more better coding.
[Code]...
I am using in built sql server 2005 which comes with visual studio 2008 in my project.This is my connection string.SQLConnection oConnection = new SQLConnection("Data Source=.SQLExpress Initial Catalog=Fas");
When I try to open the connection like oConnection.open() I am getting error like "Login failed for this user. User is not associated with trusted connection."By some googling I get the idea that I am using Windows authentication mode. So how can I change it to mix mode authentication? I dont have separate sqlserver installed on my system. It is same that comes with visual studio 2008
