Why Can't Convert The Following If Then ElseIf Into A Select Case
Mar 24, 2010Why I can't convert the following If�Then�ElseIf statement into a Select Case statement
If temperature = 100 Then
X = 0
ElseIf population > 1000 Then
[code].....
ADVERTISEMENT
Select Case Is Never Faster Than If/elseif Unless There Are Above 10 Elseifs?
Dec 14, 2009ok after some testing, i've concluded that select case is never faster than if/elseif unless there are above 10 elseifs (or cases)is it accurate? (or rather, what shld it be)
View 9 RepliesElseIf Statement Into A Select Case Statement?
Jun 23, 2010A co-worker wants to convert the following IfThenElseIf statement into a Select Case statement.
Explain why this is not possible.
If temperature = 100 Then
X = 0
ElseIf population > 1000 Then
X = 1
ElseIf rate < .1 Then
X = -1
End If
VS 2008 If Else Convert To Select Case
Jan 23, 2012[Code]....
convert this if-else-then statement to select case.
Using Sender As A Case In Select Case Statement?
Mar 21, 2006When my form loads it adds some handles (using AddHandler) to a sub (showStatus). What this sub does is checks which control activated the sub (using sender.Equals) and displays text in the status label (status) accordingly.For this I use an If...Then statement for each possibility. There are many possibilities and my code get cluttered. Is there a way to do the same thing with a Select...Case statement. I tried: Select Case sender Case tbOne : status.Text = "blahblahblahblahblahblah" End Selectwhere: tbOne is a textbox, status is a StatusLabelIt gives me an error though, saying "Operator '=' is not defined for types 'Object' and 'System.Windows.Forms.TextBox'."Any ideas on how I can get this to work with a select case statement?
View 13 RepliesVS 2008 - Select Case Not Catching The Case
Oct 20, 2009here is my code..
[Code]....
If the result is 86 and it's mod by 43 the answer is 2 Case 2 is not firing. it just goes to the end of the procedure.
Read Upper And Lower Case Letters Without Having To Put The Upper Case Letters In Select Case Statement
Oct 28, 2009i have a program using a select case to convert letters to special charaters. My question is how can I get the code to read upper and lower case letters without having to put the upper case letters in my select case statement. Example: Part of my code is
[Code]...
Using Treeview To Select One From The Other The Code Contains The Case Select?
Oct 31, 2010ive got a form containing treeview on the left docked, and two panels one over the other (just as for practice), so i am using treeview to select one from the other the code contains the Case select,
If
Not e.Node
Is
Nothing
[code]....
The problem is , both panels are not visible, when i select the first node the firstpanel is visible then i select the second node both panels are not visible, i return to the first node the first panel is visible.
AND / OR In A Select Case
Oct 28, 2010[code]I don't get any error messages, but the DoSomething() line is never executed. I guess this isn't possible.
View 7 RepliesIf-Then-Else Vs Select Case ?
Jan 3, 2011I'm working on a routine that requires a significant amount of nested and daisy-chained logic. Using If-Then-Else, each logic construct would run 8-15 lines of code (quite readable) while using Select Case each construct doubles that (even with significant commentation, it gets less and less readable with each new Case).
I've read many times in this forum how Select Case is leaps and bounds ahead of If-Then-Else in runtime performance, although I can't recall any discussion of the underlying process(es) that make it so. I've also not had any luck finding good, detailed documentation on the nuts and bolts under each logic construct. What I'm working on, if the performance leap is legit, needs the performance more than the readability but if the performance is marginal then the readability is going to get the priority. how and why Select Case is supposed to process so much faster than If-Then-Else. Links to good white paper would be really nice too.
Using Select Case In VBA?
Jun 12, 2011I have a macro that uses "If Then" to choose what macro to run based on the ActiveCell. I would like to use the Select Case method instead. How would I change this code?
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Application.DisplayAlerts = False
Application.ScreenUpdating = False
[Code].....
.net - Turning What If Into Select Case?
Apr 11, 2011Question is, I basically wrote a Rock Paper Scissors game in VB.NET using If statements and wondered how exactly I would try and work this into a Select Case instead.Professor was pretty awful at teaching things and didn't let us know until today that it had to be Select Case(its due tomorrow
View 2 RepliesConverting An IF THAN ELSE Into A Select Case
Apr 3, 2012Converting an IF THAN ELSE into a select case
View 4 RepliesConverting The Select Case With To And Is To C#?
Nov 30, 2010I am convertng vb.net to c# 2010 as my job, and none of the automatic tools I have can succeed completely. In special example, this case:
[Code]...
I am mostly java developer before this, so not great with c# and none with vb.net. I do not understand the "oaaaa to" part and this part is not converting. Can you please point me to right place to find the c# version of this?
How To Change To Select Case
Aug 26, 2009I have an if-elseif-then setup as below:
Private Sub CommandButton1_Click()
If OptionButton1.Value = True Then
getdate
Unload glpmenu
[Code] .....
I would like to change to Select Case.
New To Vb Select Case Not Working?
Mar 24, 2011i think this is the right place to post this.so i am doing my First Vb project and have run into some problems
[Code]...
Select Case & Combo Box Value?
Jan 26, 2009I am using visual basic in VS 2008 and trying to learn how to assign a value to a word in a combo box using case select, this is my first attempt at programing and i just can't work out what to do next. So far i have two combo boxes a label and a button, i want the word, first to = 11, second = 9, third =7, fourth = 5. All it is doing at the moment is adding the list index value and displaying that total in the label. I want it to display for eg: if (first=11) and (second=9) are selected a total of 20 in the label,and so on for what ever combination is selected.
[Code]...
Select Case Node Key?
Aug 18, 2009I have assigned nodes in my treeview keys depending on what they are to do with and now i would like to use a select case to choose the right calculation depending on which node is selected.i have tried selecting the key like this:
Select Case tvwFCOM.Nodes.IndexOfKey(tvwFCOM.SelectedNode.Text)
Case Is = "assi06"
Call MinimumSpeeds()
but option strict on dissalows conversion from string to integer. there are more cases, but i have only shown one here. How can i code so that the key is selected from the selected node?
Select Case Not Working?
Jan 27, 2010I had to change the given code from If Then to Select Case, and this is what I came up with. But when I run the program, it does not work and gives me zeroes instead of the correct information.
Public Class MovieInfo
Private wkndBox, screens As Integer
Private title As String
[Code].....
Use Select Case Statement?
Jun 3, 2011I just replaced a different segment of code with the select case statement and it works fine. However I don't understand what the dim is for after you do "Select case [variable name here]"
I currently just dimmed a value as nothing. I didn't specify any data type for my variable I'm using for this case statement. But it works.[code]...
Using Enumeration In Select Case?
Jun 16, 2009Enum age
Over18
Under18
End enum
[code]....
'age' is a type and cannot be used as an expression.Is there any way of using enums in "select case"?
Using TryParse Within Select Case?
Nov 8, 2010I am in my programming class and we had a small program to make that would check to see if an value that was entered is a integer and convert it to a Roman numeral. I know how to properly do it by putting the TryParse into the If...Then statement. What I am trying to do is to not use an If...Then statement and go just by a Case Selection statement. If it is not possible then that is cool with me, I am just trying to think outside the box. Here is what i have done with it:
[code]....
When you do say "Case 1" it says it needs to be "Case CBool(1)." Using either "Case CBool(1)" or "Case 1 = 1" provides the same result .However the code shows no errors it doesn't do the conversion, it always displays the label's value as "I"
VB Select Case Troubleshooting?
May 1, 2009I have a question regarding a null value which I am not supposed to get in VB. Here is my code.
Public Class SelectDemo
Private Sub lstData_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstData.SelectedIndexChanged
[code].....
Working With SELECT CASE And MOD
Oct 18, 2009i need to make a statement that checks the remainder of a number divided by 4.[code]can i get this in SELECT CASE ..MOD format please
View 1 RepliesGet The Error " 'Select Case' Must End With A Matching 'End Select'."
Jun 15, 2011Select Case currentNodeName
Case "string1","string2","string3","stringEtc"
Case Else
[Code]....
The above is a code snippet... of course I've already made my declarations earlier in the code. My issue is I get the error " 'Select Case' must end with a matching 'End Select'." It looks to me like VB is not liking my If statement with the "Next For" in the middle. I'm sure this is a basic syntax issue.
Asp.net - Select Case On Radiobutton Group?
Jul 30, 2010I have say 4 asp.net radiobuttons which are grouped, I want to find out which one is checked.
What seems natural to do is:
Select Case RadioButton.Checked = True
Case myRadioButton1
Case myRadioButton2
Case myRadioButton3
Case Else
End Select
I just get a 'reference to a non-shared member reference' error. It's a shame because it seems such a clean way to do this test.. Is it possible??
Getting A Letter Grade Using Select Case?
Dec 14, 2009I made an application that calculates course grades. The program runs perfectly except for the last part
The the final grade number comes from the label "lblCoursePts" and i want to put the letter grade in the label "lblFInalGrade" Here is what i have.
'Determine the final letter grade
Select Case lblCoursePts.Text
Case 90 To 100 : lblFinalGrade.Text = "A"
[Code]....
How To Change IF Statement To Select Case
Dec 17, 2011I've got the following that has got multiple values of a particular variable and I don't want to stack up to a lot of IF ELSE statements to handle them, so I'd be grateful if some one could very kindly modify the code by using the SELECT CASE statement. Also, I'd like dgMarksEntry.Item(7, i).Value and dgMarksEntry.Item(8, i).Value to handle RANK and COUNT the number of items entered respectively. [Code]
View 2 RepliesHow To Do First Select Case Can Figure Rest Out
Feb 18, 2010I found this code on here while doing a search and would like to be able to use it but it was written in C and I dont know much about that (don't know that much about VB.NET either but trying to learn)[code]What I do have is a text box where a user enteres a desired number of US dollars to convert to three types of currency.I know how to convert the string entered to an integer so the calculation can take place. What I don't know how to do is modify the above code so that the results will show up in the correct text boxes after each calculation (yes I know I have to convert the integer back to text).If someone could show me how to do the first Select Case I can figure the rest out.
View 12 RepliesLarge Select Case Simplified?
Nov 8, 2011I'm looking to simplify a rather large SELECT CASE. Is there a less lengthy way to write this using VB.
potentialEarnedCase = (range: 0 to 2400)
Select Case potentialEarnedCase
Case 0 To 29
potentialEarned = 0
[code].....
and the list goes on inbetween every 30, but the variable could possibly climb as high as 2400.
