I am failing to Install a windows service and I cannot see where i went wrong.
Here is the error message I get when installing the Service from the SDK command prompt window.
C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0>InstallUtil "d:\My Documents\MyNe
wService\WindowsService1\bin\Debug\MyServiceApp.exe"
[Code].....
I created a service which monitors a few servers and file shares for exchange. Written in VB.NET 2.The service is installed and running fine(ish) but randomly and without any warning or entries in the event log it stops.Upon noticing it stops (the web front end that it generates stops working) we have to manage ther hosting server to attempt to start it again.If we simply try to restart it, it fails to start with a logon failure.
View 1 RepliesI have developed an application in VB.Net 2005 Express. This app was then transformed into a windows service using a template I found on this forum. I am able to install the service using InstallUtil.exe and I am very happy, BUT the powers that be me are asking for a more eligant method of installing / upgrading the service.
All of my reading suggests I need to upgrade to VS 2008 Enterprise to achieve this goal. Before I lash out and reach for my credit card, can someone confirm the minimum requirement to achieve a pretty service installation.
I currently have a windows service that is packaged up as an msi installer. However, during the installation i need the user to input their required filepath (to string) location. The filepath variable currently resides in my component class called MyNewService that is inherited from System.ServiceProcess.ServiceBase.
Is there anyway i can allow the user to define the filepath variable during installation?
I'm trying to write a user defined filepath to my app.config file. When i enter c: as the filepath it writes it to my xml file but adds and extra /
Im not too sure why its happening? i have all the correct custom actions set up and my install method is as follows:
i have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
I am trying to change the path of Service ImagePath value in registry just after installation. Unfortunately my change path becomes only single letter in registry.[code]Source code for changing the ServiceConfig taken from codeproject.
View 4 RepliesI've created a service and ran it successfuly after a valid installation. however when i try to debug the service (not the OnStart function but a timer function i created) i get the following error: "cannot start service from the command line or a debugger.A windows service...").
The actions i made are (im using VS2005):
1. start the service
2. debug->start debugging
3. processes ->attach to process -> [select my service]-> attch
when i try to install VS2008 sp1 which is downloaded from microft.com , i got error "The application or DLL E:vs90sp1sqmapi.dll is not a valid Windows image. Please check this against your installation diskette."
[Code]...
I have an installation of VS2010 with Windows 7 at work and a laptop with Windows 7 X64. I transferred a whole set of project files to the laptop but the directory "Documents" does not exist on the laptop - it is called "My Documents". As such of course I get errors when loading the project on the X64 machine as the resource files cannot be found. I have tried changing the name of the directory to "Documents" to accord with the other PC, and this was apparetnly successful. But, VS still does not "see" the files in the renamed directory. How can I simply change the path name for the resource files so that VS can see these files?
View 8 RepliesI am trying to communicate with a Windows service on a remote machine on the network but i keep getting an exception saying the following: "System.InvalidOperationException: Cannot open Service Control Manager on computer 'machine001'. This operation might require other priviledges. ---> System.ComponentModel.Win32Exception: Access is denied.
[Code]...
Is it possible to have a dotnet windows service which monitor other services and upon stop of any service, the monitoring service would be able to start the stopped service.
View 4 RepliesIn the past I had the indexing service installed on a Windows Server 2003 and used it to index files for my website. I did this by executing an OleDbCommand with a query and a connection string.How do I accomplish the same thing with the new "Windows Search Service" (Windows Server 2008) by using VB.NET? Does this work the same way so that I only need to change the Provider name which has been "MSIDXS.1" up to now? Case true, what is the new Provider name?
View 1 RepliesWhen you create a Windows Service, you create a list of the services you want to start. The default is this:
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service}
Can you have multiple instances of the same Service class (that bind to different addresses or ports), like this?
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service("Option1"), New Service("Option2")}
Or will that cause problems? Should we use two different classes instead?
We have a server with multiple services written in .Net 1.1 and 3.5 running on a Win 2003 server. Everything runs fine, but when we stop a certain service, an unrelated service stops. I have checked and neither has any dependencies. The service we stop is in 3.5, and the unrelated service that incorrectly stops is in 1.1. We get no error messages, nor event log errors, so we are baffled.Does anyone have an idea as to what may be causing this?
View 7 RepliesI am using this method to install windows service
processInstaller = New ServiceProcessInstaller()
serviceInstaller1 = New ServiceInstaller()
serviceInstaller2 = New ServiceInstaller()[code].....
How can I get the account name after whenever the service is started ?
When you look in the "software" that you have installed you see the size of the software and the version. After I have installed my software I don't see the version in the list. Only the size of the installation. I was wondering how I can change that. Could it be that it is because I used InnoSetup and I need to set it in there or is Windows reading the version of the .exe itself?
View 6 RepliesSome software was installed on 8 XPSP2 PCs at 3 seperate times. 3 of the PCs, after installation, were restarted as per the installation instructions.When restarted, Windows XP displayed an error:The procedure entry point ___CxxFrameHandler3 could not be located in the dynamic link library Msvcrt.dll. and Windows will not start. (nor in Safemode)The problem I am having is that Msvcrt.dll is not shipped with the program, and from my research it is related to C++. The program is written in VB6 so I am confused.It could just be a coinsidence, but it only happens after the installation has told the user to restart the computer, so must be directly related to the installation. However, if the installation files were wrong or corrupt, NO installations would work correctly and we would have a problem on all of the PCs.
View 3 RepliesI am using a windows service and tried to copy some file as below,System.IO.File.Copy("Z:abc.txt", "C:helloworld.txt")Note: Z: is a map drive from another host in 1 LAN (same LAN)I got error, "Could not find a part of the path 'Z:abc.txt'."But when I tried it at a simple application using windows application, it works with the same code as above.
View 8 RepliesTried to write my first Windoes Service yesterday with a certain degree of success but I couldnt install it.Upon running teh Install programme in the command line I was presented with a 'Set Service Login' window with a User ID, Password and Confirm Password text box.I attempted to use my windows login credentials but the install failed and was rolled back.Im using a computer on a company network with Win2k?
View 6 RepliesI've created a windows service and started a deployment project for it. I have the project installer class in the service project and I've added the "Standard output etc.." from the service project as custom actions for the Deployment Project. When I attempt to install it, I get the error "Specified service already exists", which shouldn't happen (even though the service does exist) because the installer should be removing the old service and installing the new one.
I've checked that the versions are different, and that the Product Code is also different, also RemovePreviousVersions is set to true. Can anyone tell me why it isn't uninstalling my old service when I update then install again? .S: MODS: DO NOT MARK MY POST AS ANSWERED, IT IS RUDE, YOU HAVE NO IDEA IF YOU'VE ANSWERED MY QUESTION!Sorry, it gets ignored in my signature.Mods
I created a windows installer installation for my vb.net application. I want to include a tool with my installation that will run before the install begins and monitor the installation and send the log and errors to me (by email for example)
View 1 RepliesI have a .net Windows Service developed in VB.net. I have a settings file in the root directory called Connections.XML and I am setting the basedirectory [code]...
When I schedule the service this is working absolutely fine in my Windows XP machine. But when I installed the same service in our development server (Windows 2003 64 bit Server) for some reason it is not able to locate this file.
It is possible to create windows service using windows form control in vb.net. give me the url or links. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 1 RepliesI'm porting code that I wrote for use in a Windows Forms application to a Windows Service, but for some reason, the code that worked in the Windows Forms application is now throwing errors in the Service
View 7 RepliesIt is possible to create windows service using windows form control in vb.net.If yes then please give me the url or links.
View 1 RepliesI have developed a Windows Service in VB.Net (VS2010) which is running on Windows7. I am trying to get "MainWindowTitle" for processes thru their process object but it returns empty.
[Code]...
I'm writing a windows service (MacTimeFix.exe) to fix the Windows time on a Macintosh (it's like this: i live in Moscow (GMT+03:00), and Mac OS thinks that the system time is GMT+00:00 and adds 03:00 to it< and Windows thinks that system time is the local time).I need to execute my code when my VB app is closed. (it happens with the shutdown of Windows) The form is invisible (hidden), and the user mustn't click anything except windws shutdown button. It is a service. When i write a Form1_FormClosing sub, it works only on Alt+F4 or CloseButton and doesn't work when the app is stopped from Windows Task Manager or whatever also.I need a way to execute sub when app is closed with taskkill (without /force) or a way to execute a several app on Winshutdown.
Here is my code:
Public Class Form1
Dim SystemMary As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Me.Load
SystemMary = Mid(TimeString, 1, 2)
[code].....
It is possible to create windows service using windows form control in vb.net. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 2 RepliesI'm printing pdf files via the below code in a service. In Windows 7 this works really well, In Windows Vista, nothing happens at all? What am I doing wrong?
[Code]...