Asp.net - Without Data Source Assign In Crystal Report With Visual Studio 2008?

Apr 22, 2011

I am studying crystal report with visual studio 2008. I knew OLEDB, ADO.Net And ADO connections etc. But whatever connection that we must assign data sources. I want to non-configured and assign data sources as like data-grid. In the data-grid, we can configure data field name and generate data assignation in runtime. Can I do this for report or not. If I can this, tell me how can I do this.

View 1 Replies


ADVERTISEMENT

Visual Studio 2008 Not Install With Crystal Report (only Crystal Report Install Its?

Jun 12, 2011

i am having a Visual Studio 2008 but it not install with crystal report when i open add new item-> its didnot contain Crystal Report how can i add crystal report and make crystal reports in visual studio 2008 how i install crystal report with visual studio 2008 only crystal reports 2008 install and its open with visual studio 2008 when we click Project->Add New Item-> and crystal reports shows in thiis file

View 1 Replies

Using Crystal Report XI With Visual Studio 2008 Standard Edition?

Mar 11, 2010

I have "Visual Studio 2008 Standard Edition" and "Crystal Reports XI Developer edition".I have to integrate crystal reports in my application. I am fine developing the reports using the "Crystal Reports IDE" but not sure on how can I integrate those reports into my application.I have downloaded and installed the reportviewer control but not sure how to use it for crystal reports.

View 1 Replies

C# - Get Rid Of Crystal Report Generated Files In Temp Folder - Visual Studio 2008?

Jul 14, 2011

I have pasted below a piece of code where I am displaying a report. I am using Visual Studio 2008 Crystal Report engine. It works all good with the piece of code

Problem: Everytime a report is being run it generates a ('.*tmp', '.*rpt') files typically in a temp folder c:windows emp however we can get rid of the *.tmp files by setting a recycle on the application pool but need a way to get rid of the .rpt files.

Found solution: Call Close() and Dispose() on the report object. The way I am doing is crReportDoc.Close() then crReportDoc.Dispose()Actual Problem: If Dispose() is called the report comes up with the following error 'Object reference not set to an instance of an object'

[Code]...

View 1 Replies

VS 2008 Crystal Report Data Source Location?

Aug 4, 2010

Is there any way to set the crystal report data source location to the application.startup-path?
have a nice day

View 1 Replies

Crystal Report RUntime For Visual Studio 10

Mar 15, 2012

Can any one provide me with the Crsytal report runtime installer for Visual Studio 2010.I have the installer of Visual Studio 2008 but its of no use.I need the installer that is the .msi file.

View 3 Replies

Add A Data Source To Visual Studio 2008?

Jun 27, 2009

I have downloaded and run the mysql-connector-odbc-5.1.5-win32.msi. The wizard goes through the process but when I go to vs 2008 and try to Add a Data Source or Show Data Sources I get a blank. NOTHING! Just like I had not clicked on the command. There are simply no data sources available in this virgin copy of Visual Studio 2008. I cannot even access an access db!

View 5 Replies

Can't Install Crystal Report For Visual Studio 2010

Jun 4, 2011

i cant install crystal report for visual studio 2010!

i already have installed vb express 2010 and yet the installation always fails because the installer says :You must already have Visual Studio 2010 installed to proceed with this installation

View 5 Replies

IDE :: Installation SAP Crystal Report In Visual Studio 2010?

Oct 9, 2011

I want to ask about problem I had. I am using Visual Studio 2010 Version 10.0.30319.1 RTMRel

my Operating System is Windows 7 with 32 bit

and i am starting to develop report using SAP Crystal Report The step install is

1. I am going to page http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp

2. i download

a. SAP Crystal Reports, version for Visual Studio 2010 - Standard

b. SAP Crystal Reports, version for Visual Studio 2010 - Click Once

c. SAP Crystal Reports, version for Visual Studio 2010 - Merge Modules

d. SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit)

e. SAP Crystal Reports runtime engine for .NET Framework 4 (64-bit)

3. then i install

a. SAP Crystal Reports, version for Visual Studio 2010 - Standard => "CRforVS_13_0_1.EXE"

b. SAP Crystal Reports, version for Visual Studio 2010 - Click Once => "CRRuntime_32bit_13_0_1.EXE"

c. SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) => "CRRuntime_32bit_13_0_1.EXE"

after i success install those three program i started to going to Visual Studio 2010. and create project as usually. (I am developing VB.NET project) this is the step i am add crystal report

[Code]...

View 2 Replies

Modifying Crystal Report Via Visual Studio Project?

Apr 6, 2011

When I open a Crystal Report in Visual Studio I can view options for how the fields are formatted such as the date and numbers. I'm running a crystal report in a project, is it possible to edit these settings through code?

View 1 Replies

Create A Crystal Report In 2005 Using Data Source Wizard?

Apr 12, 2010

How to create a crystal report in vb.net 2005 using data source wizard.

View 1 Replies

Using List Of Custom Class Object As Data Source For Crystal Report

May 24, 2011

I am trying to find way to design a report using my own custom class. I found links:

1.) How to work in Crystal Report with Object Data Source?

2.) Use .net object as data source in Crystal Report 2008

3.) Binding object with List<> to Crystal Report

4.) How to assign Custom class as datasource in crystal report

They were quite helpful, but I have been stuck in the first step while designing report as my custom class's property is not listed in field list of crystal report design view.[code]When I add my class objects to crystal report I do not get the usertype field from users class in field list.So how can I add usertype field to my field list? Or do I have to take another approach?The reason i wanted to use it as i am:

1.) Showing a form where user can type keyword
2.) program filters the records as per keyword using LINQ
3.) when user clicks the print button, I want to set the filtered records as datasource of my report

View 3 Replies

How Is WPF Data Binding Using Object Data Source In Visual Studio 2010 Done

Apr 23, 2010

how to use the VS 2010 IDE tools in a way the Microsofties didn't specifically intend. But since this is something I immediately tried without success.

I have defined a .NET 4.0 WPF Application project with a simple class that looks like this:

Public Class Class1
Public Property One As String = "OneString"
Public Property Two As String = "TwoString"

[Code]....

The expected result was that "OneString" would appear next to "One" and "TwoString" next to "Two" in the running window.

The question is: Why didn't this work? What will work instead? If I put bindings in a DataTemplate, it works. Blend, with its sample data stuff, implied that this should work, but it doesn't.

View 1 Replies

Add A New Data Source To Visual Studio 2010 Project?

Jan 7, 2011

im trying to add a new data source to my visual studio 2010 project. As it stands my project consists of a few windows forms. I plan on making it access a database (made in access, unless this is a problem), and be able to perform pre-set queries, search/sort, and basic delete,add,edit functions. I will hopefully be later adding the function to print reports according to the database entries.However, the problem i am having is that when i go on to data sources, and click add new source, the following happens:3, it asks me which connection i will be using, i click new connection, then in the new connection dialog i choose the following : Microsoft Access Database File (OLE DB), then i browse for the database i made in the 'database file name' box, Then i delete the default username in the log in to database bit, as my database has no protection.

View 3 Replies

Setup A Db Data Source In A Visual Studio 2005 Deployment

Oct 21, 2009

I'm working on deploying a visual studio 2005 windows application executable with an embedded crystal report using visual basic. It seems to install everything just fine, however, the system dsn isn't being setup.

How do you configure a setup project to setup the system dsn during the installation?

View 1 Replies

Crystal Report & Temporary Tables - Print The Table Data Through Crystal Report?

Jun 21, 2010

I m using .net , I create some temporary tables at run time, how to print these table data thru crystal report

View 1 Replies

Create Crystal Reports From Visual Studio 2008?

Sep 17, 2009

I have added the references but I go to add ew item Crystal Reports still doesn't show.

View 8 Replies

IDE :: Crystal Reports For .NET Framework 2.0 Through Visual Studio 2008

Feb 21, 2008

I have upgraded an existing project to be developed on Visual Studio 2008 but I still need to target the .NET framework 2.0My project had the prerequisite Crystal Reports for .NET Framework 2.0 but Visual Studio 2008 reports that that "could not be found for bootstrapping"Now my users get the error:Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, ...' or one of its dependencies. The system cannot find the file specified.

View 3 Replies

DB/Reporting :: Visual Studio 2008 + Crystal Reports 2008 Viewer Click Event?

May 10, 2008

this event works ok, but the problem is that I don't know what field was clicked. Should I use objectinfo or something else? VB.net won't recognize for example e.objectinfo.

View 1 Replies

Visual Studio 2008 Debug Is Launching .NET WPF App With Old Source Files

Feb 23, 2010

This started happening randomly yesterday. When I press F5 to test my project, an old build of the program (circa yesterday afternoon) launches. No changes (and I've tried in a few different files) are reflected in the project. However, and this is truly perplexing, if I go to Build --> Build from the Menu bar, the output .exe in the /bin/release/ directory DOES include all the recent changes.

[Code]...

View 2 Replies

Crystal Report With Binding Source?

Jun 21, 2010

I have a form with a binding source bind to the invoice table. I want to generate invoice report when the user selects an invoice record from the datagridview and clicks generate report. What i want is

1. how can i set the report's source to the binding source

2. can i do this using the crystal report generating wizard

3. or what articles or sites you recommend me so as to do this

View 1 Replies

VS 2008 Connection (MS Access - Crystal Reports) - Set A New Path For Data Source During Runtime?

Jan 8, 2010

I have created a data source connection to an access db by using the wizard in vs2008. I have then used this as a data source for crystal reports. My user would like to put the database on a network and reference it there. Is there a way to set a new path for this data source during runtime?

View 4 Replies

Display Data From Table In Report Footer Of Crystal Report?

Dec 2, 2010

I'm having a problem with my crystal report with regards to report footer. I want to display the data from the table, column name "Remarks" in report footer but when I try to call the data it doesn't show the remarks. I'm using VB 6 and mdb files as my back end. Is there any command or fundamental that I've missed?

View 1 Replies

Creating Reports In Crystal Reports That Is Integrated Within Visual Studio 2008?

Aug 26, 2011

I am creating reports in Crystal Reports that is integrated within Visual Studio 2008, and I noticed that some of the features are disabled. One is the ability to link tables with a Right Outer Join or Full Outer Join. I also cannot "Show SQL Query" in Crystal Reports. Is this something I can enable or do I have to purchase or upgrade?

View 1 Replies

Data: Use Any Report Application As Crystal Report?

Dec 1, 2009

I need advise on how to solve this scenario. I am not sure whether I should use any Report Application such as Crystal Report or I can just simply use datagridview.My scenario:In a new form, a table will show a least 3 columns.

First, ItemID

2nd, Total Quantity Sold for the Current Month

3rd, Total Quantity Sold: Last month

ItemID Current (Nov) October
ABA1 100 85
ABB1 80 90

Hence, I can compare the figure of the current month with the past few month.Right now, I do not have any problems building SQL_String for calculating the Total Qty Sold for the Current month and display it via DataGridView. But I am not sure how to additional column that calculate the Total for the past few month

View 3 Replies

Migrate VB6 Data Report To Crystal Report Within VS.NET?

Feb 19, 2009

I am trying to convert a VB6 Data Report (.dsr file) to a Crystal Report through the migration process within Visual Studio. I have read articles that reference adding a Data Report to a Project from Visual Studio 2005/2008 and that it will convert the Data Report to a Crystal Report, but I have not been successful in doing so. Does the VB6 Data Environment need to be converted too? Has anyone been able to do this successfully and if so, how?

View 1 Replies

.net - Get Visual Studio To Produce The Same DLL For The Same C# Source?

May 13, 2010

I noticed that when I build a given C# or VB.NET source to produce a DLL, the binary output is different each time. It would be helpful for our build / deployment process if this was not the case. Can I control this?

View 3 Replies

Assign Data Source To ListBox?

Jan 16, 2012

assign data source to listbox. These are my codes. The codes generated error in retrieving data to listbox.

Private
Sub
Button2_Click(sender As
System.Object,

[code]....

View 4 Replies

Getting Error When Execute Visual Basic 6 Program To Run Crystal Report?

Feb 21, 2012

When I try to print my record using ReportViewer.exe error that given is - "The Array s Fixed or Temporarily Locked (Run Time error When I debug through the code error is - "Method 'AddRows of object 'ICrystalDataObject' failed"

Dim cdoRecordSet As CrystalComObject
Set cdoRecordSet = CreateObject("CrystalDataObject.CrystalComObject")

[code].....

View 2 Replies

Get Start With Crystal Reports For Visual Studio 2010?

Jun 26, 2010

I'm very new to Crystal Report for Visual Studio 2010 hence, kindly give me step by step instructions to do the report on Windows Form. I'm using SQL Server for my Database (SQL Server 2008 Express) and Visual Studio 2010 Prof

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved