I want to assign an event to trigger when I right click on a button. I notice one of the events listed as available is the MouseClick. Also RightMouse button is listed as an e.Buttons value. However when I right click the button the event dosnt trigger.
View 4 Repliesi have two asp:buttons.. say button1 and button2, what i would like to do is fire button2's click event when I click button1.. is there a way to trigger click event on an asp:button through code behind? please help, newbie here.
View 1 RepliesI have a set of accordian divs (powered by the prototype library) in an asp.net page. I would like to save the state of the accordian, so when a postback event occurs, the same div is open rather than reloading the page entirely and opening the default div.
My plan was to set a page control value with the ID of the open div using the div's toggler click event function, and then fire a click event after postback calling that same div (using the value of the control holding the div ID) as the target. I'm not sure how to fire a javascript click event from vb.net however, and this sure seems like a lame workaround.
1) can you tell me how to fire a javascript click event from the vb.net codebehind page
-or-
2) is there a more elgant way to do this?
i have a little problem in calling the button1_click event of form1 from my form2.whenever i use call form1.button1_click() it gives me an error saying argument not specified for parameter 'e'. can anyone please assist me on fixing this?
View 2 RepliesI'm attempting to convert VB 5.0 source code to VB 2008. The converted code will then be slightly altered to facilitate its incorporation into a larger project that I'm developing in VB 2008. After using the conversion wizard (which is actually written for VB 6.0), I have 49 unresolved issues -- less than I expected. Much has changed since the days of my prowess as a programmer (Fortran in the 70's), so working my way through even as few as 49 issues will be a challenge, and will (no doubt) take me a while.
The UI for the VB 5.0 code I'm converting is a "virtual remote," with control buttons that (when clicked) trigger communication to a USB-connected device. With assistance, I've been able to develop my own "virtual remote," contained within my VB 2008 project. Eventually, I will "substitute" mine for the original. For now, though, I'm wanting to use MY "virtual remote" to trigger the original.
I have the executable for the VB 5.0 program, and can run it simultaneously with my "under-development" VB 2008 code. Problem is: I don't know how to cause a "click" on MY virtual remote to trigger a click on the original virtual remote (which is being "monitored" by the other program).
my source code in design part is:
<asp:Panel ID="Panel1" runat="server" Style="display: none" CssClass="modalPopup">
<asp:Panel ID="Panel3" runat="server" Style="cursor: move;background-color:#DDDDDD;border:solid 1px Gray;color:Black">[code]......
Ok button click is not accessing click event.
I have a list of buttons in VB2010.What is the best way to assign a function to their click event.So every button has the same function, e.g.:
On Button Click
FireFunction(1)
End On Button Click
Without having to add a click event for every button.The goal is to produce something similar to what is done with the Control Array idea in Visual Basic 2006.
I have a WPF project in Microsoft Expression Blend.I made a context menu for the window, but I don't know how to assign a click event for each of the items.If you want- here's the XAML code for the context menu- it works ok:
Code:
<Window.ContextMenu>
<ContextMenu Padding="0,2,0,2">
<Label x:Name="label1" Content="text1" mo/>
<Label Content="text2"/>
[code].....
I have a main form that has a dynamically generated treeview and also a panel control. Depending on the selection made within the treeview the panel docks 1 of three diffrent usercontrols which are full sub forms(done for ease of modifing design of sub form rather than layering panels on top of panels).Upon button click withing usercontrol i wish to trigger event within main form.For example delete button wich then triggers to remove current selected node from treeview. code for 1 of three diffrent user controls
Dim ctrlQ As New QuoteUC(TrViewQuotation.SelectedNode)
PnlSubFormDock1.Controls.Add(ctrlQ)
Code for delete button for which i need to raise event.
If MsgBox("Are you sure you wish to delete this customer ?", vbYesNo, "Delete Record") = vbYes Then
Deletecustomer(n)
End If
The code is listed below which hopefully illustrates what I'm trying to do:[code]....
View 12 Repliesi'm making some login function with some website but this website button is some different before what i know method. to login this website , first should have to some button click then drop down menu go down then can input id and password. how can i emulate click and make drop down this menu? if you go following website you can see right side 'Log in' button if click this button drop down menu go down [Code]
View 2 RepliesI have a vb.net application that uses Flash movies (AxShockwaveFlashObjects.AxShockwaveFlash). I have buttons in the flash movie. When they first start using the application, they can single click on the buttons in the flash movie and button responds accordingly. But after a while (and I haven't been able to pin-point an exact thing that changes it or my issue would be solved), the user has to double-click on the button in the flash movie for them to work.
View 2 RepliesI want to create a server control that inherits System.Web.UI.WebControls.Button but gives it special capability, now what do i mean? i want my button to be a confiorm button that will work like so:
Renders to the page as a button of lets say cancel after the user clicks it i want to catch the click event (within the server control) and now after the click makeing the button not visible and makeing some kind of content placeholder (that will render from the server control) visible. that content place holder will have 2 buttons inside of it: yes and cancel. I want the programmer that adds this control to be able to register a function to the click event of the yes button. and the second cancel confirmation button should make the first button appear agian. (i know how to do this all in the client side but this time i need it all as server events)
My question is this: how do i catch the click event? i want it all to be handled inside the server control itself. so a programmer that adds this control wont have to worry about anything but just needs to register to the click event of the "yes" button.
Can i Know how to catch between these 2 event, Leave and Click?
I have one checking in a textbox Leave event. I will go check whether this ID is already exist in DB or not. If exist, I will prompt MSG box to user.
When I click on Close button while focus is on textbox, this textbox Leave Event will trigger first before Button Click event.
So, the form remains open without trigger Button Click event.
how to prevent this textbox leave event or how can i catch/control this situation?
i declared a global variable button:
Dim button1 As New Button()
Now, i dont know how to add a click event in this button since it is a variable.
How can you chnge the location of a ovalshape using button and 2 textboxes in a button click event
View 1 RepliesI believe there wont be any diff if user clicks the button on the form and the click event is fired OR if we call the button click event / function in the code. Because in one my project, this does make diff. If I click the button on the form, the App works great but same button if I click it thru the form code, the whole process crashes. This happens in Vista / VB.net.
View 12 RepliesI have created a custom control that has a few labels and a button on it. In my main program i dyanmically add this control to a stackpanel. When i add the control i add a few events for it by doing th e following:
Dim newqueue As New UserControl1
AddHandler newqueue.MouseDoubleClick, AddressOf PrintMessage
How would i go about adding an event for the button.click for the button in the custom control?
I need to fire asp.net (link button or Button) click event(server side code) using Jquery, the buttons are in an update panel.
View 3 Repliesi want to call a button click event in any other event like this form key down event.if e.control andalso e.keycode=keys.S then savebuttonclick event should be called end if
View 5 RepliesEg. ""vb.net" timer event trigger on purpose". This application is meant to run at all times to download a web page every minute. To avoid freezing the UI, I read that the best solution is to move the code from a While/Sleep loop to a Timer that will be triggered every minute. The problem I have, is that the user must wait for a minute before the event is triggered:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 60000
Timer1.Enabled = True
[CODE]...
Is it possible to force this event to occur instead of waiting for it?
I placed cursor over the button and press left mouse.Ok i know how to use button_click event..BUT how do you make the button_click event continuously fire while the mouse left button is kept down over the button on the form. with a custom set interval say of 500ms
View 2 RepliesI have a silverlight page with a textblock and button on it. Like this:
<TextBlock x:Name="txbNote" Margin="50,50" Text="Hello"/>
<Button x:Name="btnCheck" Height="40" Click="btnCheck_Click" ClickMode="Press" Margin="50,50,50,50" Content="Check Service"/>
Here is the handler for the click event:
Private Sub btnCheck_Click(ByVal sender As Object, ByVal e As EventArgs) 'Handles btnCheck.Click
txbNote.Text = "I Was Clicked"
End Sub
[Code]...
The only change is the relative position of the textblock and button. The button's click event (and every other event I tried) just doesn't fire unless the textblock is before the button in the xaml.
Im trying to create a webform that is a representation of a paper questionnaire that has 14 questions with yes/no answers. If an answer is no, then you must provide information as to why in 3 separate textboxes and store the information only when a user clicks no.I also have 4 drop down lists that are chosen before the user answers the first question that also need to be stored with the textboxes, but the ddl's value does not change after the user starts. Right now I have 3 textboxes and a submit button for each of the 14 questions that are hidden until a user hits a "no" button, in which I change the visible property of all of them and the user then types in their reasons and submits the answer. I am currently doing this for each question and i hide/disable the textboxes and button after submitted.
My problem is that for each event on the 14 submit button's is that I'm forced to open & close an sql connection and insert the values. I know there has to be a way to simply this some so that I dont have 14 different groups of the same code. I would also like a way to eliminate having 40 textboxes on a page lol, because the idea was to have a pop up box or something open that would let the user submit it and then return to the question instead of hiding textboxes, but the user has to see all 14 questions at page load so if you got an answer to that one then that might solve my original question.
how to use double click event on button in vb.net
View 10 Replieshere is what i want to do:
Private Sub UpdateButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles UpdateButton.Click
MyUpdate.CheckUpdate("version.txt")
[code].....
I'm using winform and fb.net. Any example of how to create a buttons click event?
I have
dim but as windows.forms.button
but.name
but.text
but.location
etc.
but I how do I create the Click and the code behind it?
How do you stop a sub that's called from a button click event?
View 7 RepliesI need double click on button and show msgbox ("Double click").
View 10 RepliesI have a collection of buttons which i am using a collection of buttons as barriers in my game. So the character gets pushed back if he moves into the buttons bounds. I would like to know how to set the buttons mouse click event to display there current tag and other info
[code]...