C# - DataGridView SelectionChanged Event Not Firing When Grid Is Zero Height?
Apr 19, 2012
I have a DataGridView that I am adding rows to programmatically.Normally, when I add the first row of data the SelectionChanged event firesBut my Grid is anchored to the top and bottom of the form and when I make the form smaller such that the height of the Grid is zero, the SelectionChanged event does not fire when adding the first rowIs this by design? It doesn't seem logical to me.
In the following sample, I create a collection of objects and bind them to a DataGridView. When the button is clicked, I .SuspendBinding, then remove all the records, then .ResumeBinding. The DataGridView1_SelectionChanged event is fired when I remove { m_dataSource.RemoveAt(pos) } the selected row of the Grid. Why is this? I would think that .SuspendBinding() would stop any events from firing through to the grid. If not, what is the point of .SuspendBinding()?
Imports System.ComponentModel Public Class Form1 Private m_dataSource As New BindingList(Of BusinessObjects.Person)
Is there a way to prevent the SelectionChanged event from firing when adding rows to a DGV programatically? I am adding rows in a loop & the SelectionChanged event fires twice, which is causing me problems. I only want it to fire when the user clicks on a row.
i got another problem with this selectionchanged event in datagridview1, i set my datagridview1 to Selectionmode = fullrowselect.
the problem is i got nullreferenceexception error whenever i clicked the column header, so meaning selectionchanged fire when i click the columnheader since columnheader will have a row value of null the exception appears, i tried to catch it but ending up in messy situation which the code i written doesn't run right. is there anyway to prevent user from clicking column header but it still visible? but if i do that user cant sort the data right. [Code]
I have a datagridview and some code that will seek out the appropriate row and select it programmatic.
For intIndex As Integer = 0 To ofrmMasterList.dgvMasterList.Rows.Count - 1 If ofrmMasterList.dgvMasterList.Rows(intIndex).Cells(0).Value = strMasterID Then ofrmMasterList.dgvMasterList.Rows(intIndex).Selected = True
[Code].....
The above code works like a charm, except that my selecting of the right row does not fire the datagridview 'selectionchanged' event like it would normally do if I just clicked on it manually.
what I need to do to get the grid to fire off this event after selecting a row with code instead of a mouse click?
I have a asp grid with a few columns that bind to data. The last column has been converted to a template-field. In this template-field is a button with a modal popup extender attached to it. Hidden inside this field is a modal popup. This modal popup is used to add a new account. it contains 2 text boxes, drop down lists and buttons("Add" and "Cancel"). When "add" is clicked the modal should close after the inserting of the new account in the code behind.
The Problem: I get the popup to display and load the Drop down lists from the cache, without problem. How do I get the button click event to fire in the code behind. I've tried using a JavaScript function that performs a _doPostBack('btnAddAcc','') but it keeps returning the error "JavaScript error: Object expected". I gathered after about 1 hour on Google that it is because "btnAddAcc' is not found because it is actually within the grid-view cell and can't be directly accessed. Using page methods and ajax calls is a last resort as the company has a strict policy against this and only allowes this after a bunch of paperwork.
Private Sub dgvEquipTran_DefaultValuesNeeded(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewRowEventArgs) Handles dgvEquipTran.DefaultValuesNeeded e.Row.Cells("ID").Value = Me.cbxID.Text e.Row.Cells("Rate").Value = 12 End Sub
I've got the above event setup. However after select and delete the last row of a one row datagridview, the above event doesn't fire. Even when the current selected row is the new row (one with *). I have to click away, on the next tab and back again before it is fired and populated the new row with the values.
why the SelectionChanged event fires when adding the first row to a DataGridView? Subsequent adds do not fire this event ... only the RowsAdded event fires after the first row is added.
I have to Panels on a Form. The "upper" Panel is set to Dock = Fill the second "down" Panel is set to Dock = Bottom
Ok. - During the application I add some usercontrols in to the "down" Panel.
Now in one of the usercontrols, I have two group boxes (also set to Fill & Bottom) In the upper groupbox (Dockstyle = Fill) There is a Grid and below the grid, I have two RadioButtons.
On my developer machine, I can see the Grid and the Radiobuttons. On an other machine (other resolution, and other Display), I have the problem that, the RadioButtons are not visible anymore. - The user has to change the height of the "down" Panel by hand, so he can see the RadioButtons.
What I try to do now (and I don't get it working) is: Set the minimum heigt of the "down" Panel so, that both Groupboxes are visible and what is more important: that the commands are all visible.
calculate the height of the grid and the Radiobuttons depending of the solution and used display!?
i have a DGV and 2 TextBox (the first one is for user input and the second is for displaying "Contact Person") in my Form. DGV DataSource is from database, i bind it programmatic with DataTable, the data is binding well, perfect, but when i use event Selectionchanged for DGV to display "Contact Person" in TextBox2 BASED USER SELECTION in DGV, it become error : "The Connection is already open" here is my code to bind data to DGV :
been trying to find examples of how to go about auto sizing the controls i have within a grid control if the users screen is larger than the default size.Currently i am unable to resize the controls when i enlarge the form. Is there any code currently that can find all controls inside the grid and resize them on the fly when the form is resized?My current code is:
I am using a monthcalendar inside of a panel. when the user changes the "showweeknumbers" of the calendar I need to move some label to the right of the calendar, but I also need to resize the panel. The problem comes into play when the user hides the weeknumbers, the monthcalendar resize event fires and the labels move, but the panel resize causes the month calendar to fire the resize event again, making the labels all out of wack...
I've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1 master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
i have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init If ViewState.Item("nameload") IsNot Nothing Then If ViewState.Item("nameload").ToString = "True" Then
[url]...and have applied the vb code. The problem I have is that the user doesn't navigate within the datagridview. They click a save button on a toolstrip. As the user doesn't move from the current cell then the cellvalidating event doenst get fired. [code]...
We're trying to design a toolbar to use as an addon in another program. we want to set one of the buttons so that when u single click it, the image on the screen is blanked out. And when you double click the same button, it blanks everything except the selected image. However the DoubleClick event doesnt seem to be working at all.
I have two forms that I worked on separately, each has an event load button that works with a datagridview without any problem. but when I created a third form and moved the buttons on it and try to update the datagridviews on the two forms, it doesn't fire up here's my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Below is my databinding code. It is called from Page_Load()
[Code]....
Bind data to datasource of dropdown control when it is not postback Control was added from toolbox tried adding event handler in .aspx. Still did not work.
I've bound a bindingsource to a datagridview and each time i move the cursor on the datagridview to a different row, the positionChanged does not fire. This event handles other bindingsource too and I hv no problems with other datagridviews.
Im couldnt work out the behaviour for this particular datagridview.
I am running VS 2008 and building my app on a Windows 7 box. The main form/window has a KeyDown event handler as follows in it:
Private Sub Form1_KeyDown(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles MyBase.KeyDown MsgBox("control = " + e.Control.ToString + ", shift = " + e.Shift.ToString + ", e.Keycode = " + e.KeyCode.ToString)
When I build it and run it within VS it seems to run fine. The messagebox appears with the state of the control and shift keys along with the key code of the key I pressed. However, if I take the executable and run it on an XP box (both using .Net Runtime 3.5) as soon as the main form opens, the messagebox appears. Basically the "KeyDown" event seems to be firing without any keys being pressed. The messagebox comes back with: "control = False, shift = False, e.Keycode = None".
How is this possible? How can the keyDown event be fired when no keys have been pressed (as is confirmed by the output contained in the messagebox?) how I can diagnose this on the XP box since it does not have Visual Studio on it?Update I tried creating a brand new project where there is only "form1" and the only code behind this is the keyDown event handler. It just opens a blank window and pops up the message box if a key is pressed. It worked as expected on the Win 7 box but when I moved the executable to the XP box, it immediately popped open the messagebox without pressing a key.
I am developing a Vb.net .Net 3.5 PDA application using the OpenNetCF IOC framework. I have set up and event to handle the navigation through the smart parts but when I raise the event the EventSubscription does not fire.
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.
There's nothing special I'm doing to reference the elements: <telerik:RadButton ID="RadButton1" runat="server" Text="RadButton"> </telerik:RadButton>
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.There's nothing special I'm doing to reference the elements:[code]....There's also an ordinary i have that doesn't fire either.
I have a masterpage in which I attached a content page. Now, I added a button which is running at server and placed a code, MsgBox("hi"), in its click event. I placed a breakpoint in its click event and played it to see if it's firing and it clearly did not.
I have a form with about 40 checkboxes. Once a checkbox is checked, the div control's property should be changed from "none" to "block" or vice versa. I don't get an error, but the checkedchanged event isn't handled. Here is the markup:
