C# - Extract The 256x256 Icon From An Icon And Display It In .Net, Winforms, XP?
Mar 18, 2010
Here's the code that I use to extract the icon size that I want:
Dim i As Icon = My.Resources.Spectrum
Using i2 As New Icon(i, New Size(256, 256))
Me.PictureBox1.Image = i2.ToBitmap
End Using
This works from 16x16 up to 128x128 but for 256x256 it extracts the 128x128 icon. I tried 0x0, because I seem to remember that that is how the large size is stored in the meta data, but that didn't work either.
View 3 Replies
ADVERTISEMENT
Jun 8, 2010
I run a software development firm that develops application for Windows Vista or higher. Windows Vista has a new feature called large icons, that allows display of up to 256X256 icons.
However, if I make an image that contains this icon file, the image just assumes that it should use the 32X32 one in the ICO file, even if I scale the image up to like 500X500 (in that case, it just scales the 32X32 one up).
View 6 Replies
Aug 15, 2009
Ive found plenty of examples of extracting an icon from a dll, but then those examples display the icon as an image, which is not what Im trying to do. Im trying to extract those icons dynamically into my program to set the application icon, and other icons for items on the menu bar. I have this little bit of code, but I keep getting various errors when I use it.
View 12 Replies
Mar 17, 2011
how do i draw image in listbox_DrawItem event by the left side
Dim targetsize As New Size(16, 16)
Dim img As Image = Nothing
img = My.Resources._error
[Code]....
View 1 Replies
Jun 21, 2009
After scouring the forums for a code to extract icon from exe and convert to bitmap, i got that working, and the image will display on my form just fine. I want to save the image so it can be loaded again after the program is closed, but I get "Generic error in GDI+ occurred" when I attempt to save the bitmap.
Dim ExeIcon As Icon
Dim button1icon As Bitmap
ExeIcon = System.Drawing.Icon.ExtractAssociatedIcon(Filename)
button1icon = ExeIcon.ToBitmap()
Button1.BackgroundImage = button1icon
button1icon.Save("C:utton1icon.png", System.Drawing.Imaging.ImageFormat.Png)
View 4 Replies
Jul 7, 2009
According to MSDN, the Icon.ExtractAssociatedIcon method cannot accept a UNC pathname, which I think is totally absurd. Does anyone know of a work-around to extract the icon of a file on a network?
View 2 Replies
Nov 19, 2010
I currently have the following code but I would like to get away from going to a physical location. If I have the icon as a resource, how can I programatically add the icon? I don't want to use the form's designer to do this.
Sub Form1_Load()
Dim ico As New System.Drawing.Icon("C:Resourcesicon.ico")
Me.Icon = ico
End Sub
View 2 Replies
Jun 4, 2011
My application icon looks ugly-like a paper and i would like to change it to something like globe icon or any suitable image.Am programming using visual studio 2005 and the program is written in vb.net.
View 1 Replies
Jul 28, 2009
I'm not sure exactly if the folder icon is in shell32.dll, but nonetheless if it is.Basically, whenever I come across a folder in a FileSystem list, I want to add the icon for a folder to the image list that I am using for the ListView. The problem is that I'm not sure how to reference a specific icon location in a icon collection in a dll.Is this possible with Icon.ExtractAssociatedIcon and shell32.dll?
View 14 Replies
Oct 2, 2010
how to extract the various images from an icon file ie 256 x 256, 48 x 48, 32 x 32, 24 x 24, 16 x 16 etc.
View 1 Replies
Jun 26, 2011
Got an annoying issue it's Visual Basic 2010 I changed icon where the assembly name.I got a good icon it has lots of sizes, or I tried diff sizes like 64x64 128x128 nothing seems to work I only see the icon when i do View > Details so it's small icons in the folder, but if i have view large icons It doesn't work. I even used the same icon on VS 2008 and it worked.
View 1 Replies
May 3, 2010
I'm attempting to remake the Explorer to customize it some more. I know how to get Name, FileSize ect. Getting the Icon is hard though.
[Code]
The code i'm using to Insert the Icon into a image, i'm getting this error: Error1Value of type 'System. Drawing.Icon' cannot be converted to 'System.Drawing.Image'
View 2 Replies
Nov 10, 2008
i'm getting this really strange error, or I must be overlooking something obvious. I'm using the following piece of code:Dim hwnd As Integer = GetWindow(GetDesktopWindow, GW_ CHILD) Dim myicon.As System.Drawing.Icon =Icon.FromHandle(hwnd)PictureBox1.Image =myicon.ToBitmap
View 1 Replies
Jun 2, 2011
Why is it that the icon of my form appears only when I am running it in my IDE. When I publish my program and running it in Windows, the icon does not appear at the taskbar, what appears is a default icon instead.
View 2 Replies
Jul 30, 2009
I've just changed the Icon for my application in the project->Properties->Application tab. However when running it's still the old (small) icon in the taskbar. How is this changed?
View 4 Replies
Nov 21, 2011
I have an issue with the icon displayed on the desktop. I have used the project's properties, application form and used the dropdown menu under icon to associate an Icon to the application. I have done this loads of times before and it has always worked.
View 6 Replies
Mar 25, 2010
How to get the Favicon or deffault websites icon to my Picturebox in vb2008 ?
View 1 Replies
Oct 6, 2009
Dim iconloci As String = located
Dim iconindex As String = iconloci.LastIndexOf(" exename: ")
iconloci = iconloci.Remove(iconindex)
Dim theicon As Image
[code].....
It works perfectly for files on the local system. But i need it to also grab icons from exe files in network locations(\\example-pc\example). Vb net just throws an error when trying....The error:QuoteValue of "\\examaple-pc\example-folder\example-file.exe" is not valid for 'filepath'.
View 4 Replies
May 29, 2009
Im trying to make the an icon for the form work with my own icon, because all programs have their own(like ie hat the e and paint.net has their logo), but whenever I put in my icon phote(and it is saved as .Ico) it comes up with the error: Argument 'picture' must be a picture that can be used as an icon. I have the same measurments as the defult one(32 by 32) so what am i doing wrong?
View 8 Replies
Jun 25, 2010
How to replace icon NOTEPAD.EXE with icon regedit.exe in VB.NET?
screen
get icon in vb6:
[Code]....
View 6 Replies
May 4, 2011
I have a vb.net 2008 application which has its corresponding icon.
The icon shows correctly except in the taskbar when the "small icon" setting is on.
My vb.net project includes a .ico file which when I see in the IDE includes 16x16, 32x32, 48x48, 64x64 and 256x256 bitmaps, in 4, 24 and 32 bits, also 3 .png images in 256x256 32 bits each.
I made the icon myself simply using a 64x64 bitmap and then converting it to .ico, and assigning it to the application in the project properties. I thought windows would use and escalate the corresponding image, it shows even in the file explorer properly in the small icon form, but not in the taskbar.
View 1 Replies
Feb 23, 2012
I am writing an application that will cache all my files and then let me display files that I would like to display. I am wanting to extract the icons from each file as I cache them.My question is this: How can I detect if the icon from one file is the same as another icon and therefore prevent me from extracting it twice?
View 8 Replies
May 15, 2011
I'm making a explorer like app to browse files stored on my computer. My app will be in "Icon" view. The question is: How to display the icon of an exe file?
View 1 Replies
Jul 25, 2010
May I know how do I get the icon of a program to display along with the name of it?TBProgram.jpg
Public Partial Class MainForm
Public Sub New()
' The Me.InitializeComponent call is required for Windows Forms designer support.
Me.InitializeComponent()
[Code]...
EDIT: I know this has been asked a billion time. But when I tried to get the codes together, I get many warnings and exception errors.
View 4 Replies
Jul 25, 2010
How do I get the icon of a program to display along with the name of it just like in Add/Remove Program? I've tried to search for codes regarding it and pieced them together but I get too many warnings and exception errors. Below is my code for the entire form.
Public Partial Class MainForm
Public Sub New()
' The Me.InitializeComponent call is required for Windows Forms designer support.
Me.InitializeComponent()
[Code] .....
View 2 Replies
Aug 2, 2010
Im in a win.form app. in .Net 2008 I have a lot of Icons that I want to display on a (TouchScreen enviroment) button The icons are in 8,16; 32 bit in the sizes 16X16 ; 32X32 ; 48X48
The buttons are large enough, they have a dimension of 252X132.The images are loaded via the Button propertie : Image. This has allso a size propertie, but is disabled. And I can see its loading the 32X32 32bpp format But I want the 48X48 size on there. Does some 1 knows how to get those sizes op the button.
I know its possible via a imagelist but why have a resource if you cant use it??
View 6 Replies
May 27, 2009
How would I display an Icon at 48x48 resolution on a form in vb.net? I looked at using imagelist , but I don't know how to display the image that I add to the list using code and how to specify it's coordinates on the form. I did some google searching but none of the examples really show what I need to know.
View 3 Replies
May 31, 2012
I am working on a Vb6 to VB.net migration application.I am not able to proceed in one place.I have a Resources.Resx file in my application in which some Icons are stored like "icoUS","icoCA" etc. And there is a combo box where some country names are listed.On selection of this combo box, the corresponding countrie's flag image should be dsiplayed on a picture box.[code]...
View 1 Replies
Aug 15, 2009
i posted about how to transfer file and i found a thread explains it with sample. Now how am i able to display it in a form the file transfer, the icon the name and size. And the user can click it .
View 4 Replies
Aug 10, 2011
I have a gridview column in which I have one column that point to a pdf file on the file server. I need to have another column right beside this, displaying the pdf icon. The user should be able to click the icon and launch the file from the file server. [code]...
View 3 Replies
