The book "Beginning ASP .NET 4 in VB 2010" contains the following:NOTE: TaxableProduct inherits from Product.You can also cast in the reverse directionfor example, cast a Productreference to a TaxableProduct reference. The trick here is that this
View 2 RepliesHere is the structure that I have:
Friend Class StandardFormatFile
Friend fileType As String
Friend numberOfSeries As Integer
[code].....
I have this bit of code
Private Sub SpellChkMenuItem_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SpellChkMenuItem.Click
Dim activeRichTextBox = TryCast(Me.ActiveControl, RichTextBox)
'clsFS.CheckSpelling(activeRichTextBox)[code]....
When I am in the rtb and click on spell check button it tells me the error "Object reference not set to an instance of an object." On this line
SpellChecker.Text = activeRichTextBox.Text
But it is suppose to be getting the focused rtb correct? So why is it not referenced
I am receiving this error: Reference to a non-shared member requires an object reference on the code I've
bolded within the code body. Here is my code:
[Code]...
I get this error:Reference to a non-shared member requires an object reference.When i compile on the following code section:
Private Sub statusBarToolStripMenuItem_Click(ByVal sender As Object, ByVal e As EventArgs)
ToolStripMenuItem.Checked = Not ToolStripMenuItem.Checked
statusStrip1.Visible = ToolStripMenuItem.Checked
when I do something like this: Process.Start [URL] it says that error only on Form2 not Form1.
View 2 RepliesError 'Reference to a non-shared member requires an object reference'?I want to know what a non-shared member is.
View 2 RepliesI am opening frmB (variable for FormB - the actual form) from frmA. From btn1 I open frmB like this:
frmB = New FormB()
frmB.Show()
From btn2 (frmB is already open) I bring frmB to the front from behind frmA:
FormB.Show()
FormB.BringToFront().
No problem so far. Now I need to pass an arg to frmB. This is where I am having the problem.
from btn1 (in frmA) I do this:
frmB = New FormB(myArg) '--pass myArg to constructor of FormB -- no problem here
frmB.Show()
then from btn2 -- this is where I have the problem
FormB.Show()
FormB.BringToFront()
I tried placing myArg in FormB.Show(myArg) but that did not fix the problem. What is the correct way to pass myArg to FormB (frmB) in this scenario? Do I need to share FormB or frmB? How do I do this? "frmB" is frmA level variable.
why i am getting an "reference to a non-shared member requires an object reference" error on format.Yesterday gets the previous days date and presents it in a yyyyMMdd format.vsettlementDates takes the "Yesterday value and requests data from it.
Dim Yesterday As String = format(Today.AddDays(-1), "yyyyMMdd")
Dim vSettlementDates As String = (Yesterday)
I am getting the following error:
Error 1 Reference to a non-shared member requires an object reference. (on WindowsIdentity.Groups)
Here's my code from that uses the WindowsIdentity.Groups property to display the identity references for the groups the current user belongs to. This code is part of a larger example provided for the WindowsIdentity class.
Public ReadOnly Property Groups As IdentityReferenceCollection
Get
Dim irc As IdentityReferenceCollection
[Code].....
" GridView1.datasource = _MyUsers.Reference to a non-shared member requires an object reference." error. WHat's wrong with this code
<%@ Page Language="VB" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]......
I have the following code below, how the line where it says : For Each c As councillor In councillorList i get the error: reference to a non shared member requires an object reference. Can someone please advise where i am going wrong? [Code]
View 2 RepliesAlright, so im getting this error:Reference to a non-shared member requires an object reference.This is the bit of code the error is pointing to:My.Settings.Bookmarks.Add(WebBrowser.Url.ToString)Why is it giving me this error?Its saying WebBrowser.Url is the problem.
View 1 Repliesim sure it is something really simple. Im by no means comfortable with VB. The below code is not mine but i have altered it for my needs. However im getting a couple of errors.
Reference to a non-shared member requires an object reference. I have underlined the errors in the code and they all refer to the above description
[Code]...
Im trying to create a login page which accesses a mysql database I keep getting this error: reference to a non shared member requires an object reference
[Code]...
How do I fix the following error: Error 1: "Reference to a non-shared member requires an object reference."
On Line:
shortCut = CType(WshShell.CreateShortcut(creationDir & "" & shortcutName &
".lnk"), IWshRuntimeLibrary.IWshShortcut)
Here's my full code sample (if needed for context):
[Code]...
I am getting the following error when I call another form from Form1 and fill out the text boxes and Press Ok button. For some reason I cannot access the datatable (dt) from Form1. It gives me the following error: Reference to a non-shared member requires an object reference
[Code]...
what is the matter with this
Public Sub showdataset()
For Each dt As DataTable In dsEvents.Tables
Response.Write("<table border='1'>" & vbCrLf)
[code].....
[Code]...
I am using this exact code on another form in the same project without an issue, just with a different data source. Any ideas?
EDIT: Never mind, seems like it was a stupid naming scheme and VS was adding a bindingsource with a different name than I wanted.
I have two forms form one have one listbox and one checkedlistbox and form2 have only checkedlistbox
on form one checkedlistbox is being updated by listbox_SelectedIndexChanged.
how can update checkedlistbox on form 2 when listbox_SelectedIndexChanged on form1
when i use form2.checkedlistbox.BeingUpdate()
I am getting this error for Login.Show() here:
Imports Microsoft.VisualBasic.FileIO.FileSystem
Public Class Update
Public Sub CheckUpdate()
[code]....
I am also getting this is every other form when using the Login form, along with Login.Close(), and Login.Hide(). I haven't tested any other ones.
If we are within the derived class then ofcource we can use MyBase keyword to access base class's object reference . That's fine , how can we take that base class's object reference outside that derived class's definition.
My following code will explain what i want . Actually that is giving error right now, but it is explaining my requirement .[code]...
I have added one class under namespace BusinessLogics. I have inherited System.Web.UI.Page to class and showing error as 'end expected' in
System.Web.UI.Page
Namespace BusinessLogics
Public Class BllUploadImages Inherits System.Web.UI.Page
End Class
End Namespace
How can i remove my error.
I'm getting this message in the IMMEDIATE window when I try to look at the value of public variables from my main form.[code]Reference to a non-shared member requires an object reference.But it steps into the IF statement without error - so the boolean is TRUE.
View 10 Repliesi'm using this add reference of a certain software to the libraries of VB it doesent work.i just recently notice that the zenon. application. projects. item("fdgdgd"), give this coment "reference to a non-share member requires an object reference"
View 3 RepliesThis is the first time I made a DLL file (talk about being obsolete). So I made this dll file containing all functions I need for Input Handling, I named the file "CommonTools" and added an "InputHandling" Class on it... I then created a new project, added "Common Tools" as a reference and made this code for my main form to test it:
[Code]...
I have a class in which some of the fields are also classes.
I can put values in the "normal" properties, but in the others when o try to assign values it gives the: "Object reference not set to an instance of an object"
But the code compiles fine.
dados_Defenicao = New ServiceReference1.draftClaimEntryDefinition
dados_Defenicao.arCode = "123"
dados_Defenicao.claimMarket.warrantyType = "w" - Here it gives the error
If we are within the derived class then ofcource we can use MyBase keyword to access base class's object reference . That's fine , how can we take that base class's object reference outside that derived class's definition.My following code will explain what i want . Actually that is giving error right now, but it is explaining my requirement .
Public Class Base
Public x As String
End Class
[code]....
Actually there is error in ReadOnly Property BaseReference's Getter . Error is "Error 1 'MyBase' must be followed by '.' and an identifier. " how can i get base class object reference in Main method ?
I have a Parent Class Called Fuselage that containsfour child classes called Forebody, CenterBody, AftBody, and CrossSection. CrossSection classcontains objects common to Forebody, CenterBody, and Aftbody (example: width). How do I access thewidth property in CrossSection from within the classForebody?
Public Class Fuselage
Dim Forebody As ClsSection
Dim Centerbody As ClsSection
[code].....
String s = "test"; String is a class, so to use it we should create an object of it. But rather we just make a reference of it and give it a value. How is it possible and what concepts are used in it. The metadata of String class shows the following :
[Code]...