Convert Old GW-BASIC Program To A Command Line Program With Arguments?
Mar 1, 2012
This is going to be a lot to ask, but I'd like to convert my old GW-BASIC program to a command line program with arguments. I'd like it to operate as follows:
elapse [drive:][path]filename This is my old code.
5 CLS
10 OPEN "G:Calc.txt" FOR INPUT AS #1
20 WHILE NOT EOF(1): INPUT #1, A$, B$
30 IF MID$(A$,3,1)=":" THEN C$="DOUBLE DIGIT":GOTO 50
40 IF MID$(A$,2,1)=":" THEN C$="SINGLE DIGIT":GOTO 120
Dim IncomingCommand As String = e.CommandLine.Item(0).ToString
If IncomingCommand.Substring(0, 2) = "-1" Then
form1.close()
End If
End If
I am trying to make the program close if the -1 string is sent with the program. See my installer allows for me to run certain programs before it actually installs, but it doesn't shut down copies of the program itself. So I have a next startup instance set to shut the program down if the -1 is received. But if the program is not running it starts up instead. This is not desired. form1.close doesn't work. e.cancel = true doesn't work, etc etc. What can I do to make the program not start during this instance.
I am using a CheckedListBox that is populated with Filenames (full path, i.e. C:TestTest.jpg)When I have the files that I want in the CheckedListBox I wish to click a Start Button which will process the list one at a time using an exe program that runs on the Command Line. There are arguments that need to pass to the command line as well as the file location in order for the program to process.I currently have it working but the issue is the loop finishes quickly and it is left up to the CMD.exe to finish the process. What I would like is for the LOOP to wait until each file completes processing before passing the command for the next file in the CheckedListBox.There some reasons I wish for it to work this way.
1) I would like to have a button that can Pause/Restart the Loop.
2) I would like to have a button that can Stop the Loop so the whole process can end.
3) I would like to have the Loop remove each file one by one from the CheckedListBox after it has been processed.
4) I would like to display a Message once all the files have been processed.
5) And if it were possible I would like to report the status either by text or a progress bar showing where it is at in the process.
6) And the ability to add some error handling if possible.
Since the Loop finishes so quickly as it just passes the command to the command line using the & as a seperator it is the command line that is handling the rest of the process. Because of this there is not control over it in the GUI.The code I am using allows the Command Line text to display in the Form so it won't open up a seperate window to run CMD.exe. This is the desired affect as I would like everything to appear to run from within the Form itself.
I have a console application which reads .txt files. I want to be able to drag a txt file over my app and it would automatically open my app and show the text files contents. I think I have to use command line arguments like this:
Sub Main(ByVal cmdArgs() As String) End Sub Sub ReadFile(FilePath as String) End Sub
But how can I pass the text files path to my ReadFile sub?
When you open up a .txt file, the command line opens up notepad.exe with the argument %1. which opens the text file. i dont know about the function but i understand a little bit about it.
So what i wanted to do was create a .lxproj, and make it open up with my application. i have done this part so far with an installer that creates registry keys. but, what i would like to know is how to open the file. for a test i would like a message box to be displayed if the program is run by clicking the .lxproj. if its opened normally the messagebox doesnt display.
I'm a bioinformaticist, I'm trying to teach myself how to develop programs that are easy for everyday users to automate programs used in biological research. I thought VB would be great for helping people be more familiar with bioinformatics. Unfortunately, I'm brand new to VB and am stuck with my first program.
All I want to do is have a window pop up where the user then selects a file from an OpenFileDialog box, and pass the filename to a bioinformatics program names msconvert. What I've been doing keeps giving me a message that seems to says, "Unhandled exception has occurreed in your application. . . . File not found."
However, as you can see in my code (below) I have a MsgBox that shows that the correct file HAS been selected, and I can get the whole thing to run from command line.[code]....
I'm trying to run a command line argument through VB.NET using the Shell() command.I'm trying to use this piece of code:
FOR /R %I in (*.pdf) DO @pdf2swf.exe "%~fI" -o "%~dpI%~nI.swf" -f -T 9 -t -G
Using this:
Shell("FOR /R %I in (*.pdf) DO @pdf2swf.exe "%~fI" -o "%~dpI%~nI.swf" -f -T 9 -t -G ")
However, the interpreter is giving me this error:
Character is not valid. (BC30037)
For the %~ part.I also tried created a string and passing the argument to the Shell() command by using Shell(StringName) but I still get the same error in the string.
How do you use MSI to add command line aruments to an application?I am trying add command arguments that will be processed by the application when it starts.I know how to retrieve them;I don't know how to add them.
All arguments will have the *.ipj in it. Sometimes there will be additional variables like the second example.I need to pull back the MCO#### at the beginning of the *.ipj file name. The amount of numbers can change between 4 and 6so something dynamic would be goodI am currently using the SPLIT and MID functions to phrase it...but that is a weak design.
I have successfully managed to create my own filetype (.src) but there is one problem, whenever I open a file by double-clicking on its icon in windows browser, it opens the program but not the file
What I need to do is be able to run my project in debug mode but emulate the use of command line arguments. I could have sworn I did this before but I can't find the project I did it with. Using VB.net 2005 or 2010 Pro for this. I'll keep digging around to see if something sparks my memory...
I've looked everywhere to find out whether or not it is possible to pass parameter values (arguments) into a vb.net forms application?If it is possible, could someone please point me in the right direction
I'm making a program that can take arguments and run cmd line style. I'm trying to think of a good way to sort and check the arguments. I currently split the arguments into an array and use a loop to assign them to variables.[code]That works but would seriously mess up if someone left out anything. I want to know if anyone has any tips on how to parse the incoming arguments. I always like making my scripts idiot proof, cause at times i mess stuff up.
i want to know how to get the command line arguements inside the vb program aka parameters that you specify while running a vb program through a shortcut by specifying a parameter ??for ex: "c:myfile.exe -parameter1 -parameter2 -etc".
I see so many programs take command-line arguments with flags, for example gcc hello.c -o hello. Of course, I can implement that in my application:
Dim args() As String = Environment.GetCommandLineArgs() Dim oi As Integer = Array.IndexOf("-o", args) If oi > -1 AndAlso oi < args.Length Then CompileTo(args(oi + 1)) 'Or whatever Else CompileTo("out.exe") 'Or whatever End If
But it's ugly and annoying to use, prone to errors, and inefficient. What's the better way that I keep overlooking?
Any way to add command line arguments to my application so that if someone wants to modify the settings they could run myexe.exe /settings and get the settings form of my application.
Is it possible to restart a VB.NET application, but with different command line arguments than it originally had? Here is the challenge. I want to write a single instance application. If the second instance has the same CL args as the first, then the built-in behavior is fine (second instance never opens, e.BringToForeground=True brings 1st instance to foreground, everything is great). But if the second instance has different CL args, then I would like the first instance to close and the second instance to start. However, once you mark a VB.NET app as "single instance only", it appears that you can never get the second instance. I think: OK, fine, I can just restart my first instance from the StartupNextInstance event. But how do I use the new command line arguments from the second instance? The Restart() method does not take CL args that I can see.
When I set this, I cannot read it ..CommandLineArgs is '0' in the following code.For Each argument As String In My.Application.CommandLineArgs ' Add code here to use the argument.
I have a simple question that I can not figure out.I have a service (service.exe) that is running as SYSTEM.I want to be able to send this service command line arguments. How would I do this? I am not able to just service.exe /arg because the service is running as SYSTEM and I am logged in as an admin. Is there way?
I have a VB.NET application that takes command-line arguments. It works fine when debugging provided I turn off Visual Studio's ClickOnce security setting.The problem occurs when I try to install the application on a computer via ClickOnce and try to run it with arguments. I get a crash when that happens (oh noes!).
There is a workaround for this issue: move the files from the latest version's publish folder to a computer's C: drive and remove the ".deploy" from the .exe. Run the application from the C: drive and it will handle arguments just fine.
I've done it before, so I'm getting a little frustrated on how to get this to work exactly I need to send some arguments to a command line window and I thought I did it this way:
VB.NET Dim p As New Process p.StartInfo.FileName = "cmd"
I have been trying to fix this and make this work for pretty much three days now. I already solved one problem being, I can't use the shell on one HDD and create another file onto a different drive other then the drive that the directory of the application is running in.
EX:
If I run a program that is on the C: drive and using a working directory that is on the C: drive, I can not create a file onto the F: drive.
I got this problem when I was just using Shell(Environ$("Comspec") & " /c then the command")
So I decided to use Process()
Dim p = New Process() p.StartInfo.FileName = "F:Visual Basic ProjectsCode TestingCode TestinginDebugToolsMediaInfoMediaInfo.exe"
I would like to create a console program in VB.net that would allow parameters. What i would like to do is in the code below add parameters so the webpart page can be created from the Run menu. e.g. C:.......MyProgram.exe "Design" --This would then create the Design webpart page.
I tried looking at the internet but was not very successfull.
Module Main Public Sub Main(ByVal args As String()) Dim prj As String
I'm writing a program in vb.net. The program can be started from another program by passing some arguments or it can be lauched by clicking .exe. I'd like to show the user some options depending on where he is coming.Is the below approach correct? [code]