Im trying to implement mouse emulation of multiple devices for mouse mischief from a vb.net application that will be run as a service in the background later. I just need to either simulate adding the mouse devices or pointers to screen and the send a left click for each user.
View 10 RepliesI would like to emulate multiple mouse inside of mouse mischief using vb.net 2010.My goal is this:1. get mouse devices to show pointers in mouse mischief and move them.2. get the pointers to left click in mouse mischief.I want the emulation for my kinect multipoint project which is located here:i have figured out how to create an emulated mouse device using dsf and send data (i hope) to the emulated mouse in it but confused as to if the input reports worked and checking to see if my emulated device
View 1 RepliesI would like to use raw input on mouse mischief to send emulated input as if it is coming from the mouse device.
For instance, fake mouse 1's cursor position on screen and mouse click are sent to the application inpdendtly from the system mouse or default mouse that is actually plugged into the computer.
Yes, as far as i know mouse mischief has to accept WM_INPUT so these messages because as far as i know theirs not another windows api that does this and ondevicearrival can be sent onto the application producing my desired result of creating the mouse pointer.
Anyone have any code i can try because this code is really a WM_INPUT with raw input version of kinect mouse project which i have permission to modify straight up.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt.
Is it possible to emulate a mouse wheel scroll up/down with VB?
View 3 RepliesEmulate mouse click and drag?
View 16 RepliesI have a problem with a purchased UI control, and to do a quick and dirty fix (no time to build/order a new control), I need to emulate a click at the right side, say 10 pixels into the control, from the right side of the control. Is that possible in vb.net? We can't do this functionality programmatically, due to a bad API design. And now time is running low.
Which method do I use to get the coordinate to perform the click at, and what code do I use to do the actual click? The code should move mousepointer to the location, do a right click and then return to where it was, hopefully without the user ever noticing anyting.
I am trying to make a program that AUTO left clicks the mouse according to a set second interval (This will be repeated in a loop) What I got so far is test event going on because of course you have to brake the loop somehow and stop the emulation of the left mouse click.
I have on my form a Text box and I dont know how to go about this. I want the Keyboard buttons A & S to be used to start and Stop the Loop and the Textbox to take in the input form the user in seconds.. and loop it until the user pusses S to stop..
1).. Use the Textbox on the form to let the user input the time interval between clicks...
2).. Use The Keyboard's (A) Key to START the program's Double Left Click Loop.
3).. Use The Keyboard's (S) Key to END the program's Double Left Click Loop.
4).. The Program MUST INFINITY Loop Mouse DOUBLE Left Click (UNTIL USER Presses (S) Key) (A=Start, S=Stop)
5).. The Emulation of the Clicking itself has to work in all Windows Maximized or Windowed Full-screen even on the desktop or within other programs like games. (EXAMPLE: Can run when a game is running at Full screen or windowed.
I'm sorta confused on how to do this seeing that I never dealt with emulation or events with the mouse itself. However I do know that there has to be certain key press events and a true or false statements placed in code.
OS: Windows 7 Ultimate 32bit Visual Studio 2010 W/Sp1 VB.Net 4.0 and lower All installed.
I don't know if this is really possible, the program can not use a mouse or anything that requires the use of the tab key (this would be considered a use of the mouse), is there a way to still add input into textboxes and hit buttons, kinda like the letter "q" takes the place of the tab button and letter "W" takes the place of the enter button, or this can't be done?
View 2 RepliesHow can i disable the keyboard and mouse input?
Its not working:
Option Strict On
Option Explicit On
Private Declare Function BlockInput Lib "user32" (ByVal fBlock As Boolean) As Long
[Code]......
I'm using the following code for to send mouse or keyboard input to windows:
Imports System.Runtime.InteropServices
Mouse:
mouse_event(mouseclickdown, 0, 0, 0, 0)
mouse_event(mouseclickup, 0, 0, 0, 0)
[Code].....
These work perfectly in the Windows/Desktop, but when I tried to use these in Games, the input from the program didn't seem to register, or rather registered in the background on the Desktop.
I am creating an application that creates scripts to move a mouse and to click where a user wishes to via pre-programmed code and to also press keys where required. I have the code to move a mouse and to manually click anywhere. What I am after is to detect when a mouse button is pressed and dragged and when keys are pressed.
I see that there is the following
MouseButtons.ToString
To detect when a mouse button is pressed, and have it looping in a timer. Is there a better way to do this? I would rather not use a timer. And is there a similar routine to detect which keys are pressed?
I have two custom action listers. One that handles Mouse.Click and one that handles Mouse.MouseDown. My question to you is, can I delay the mouse down event so that it does not intefere with the code of the Mouse.Click event? I have tried adding a timer and waiting x amount then setting a bool value to true, but the code executes to fast and it skips the other code.
View 6 RepliesI have a webservice created using classic ASP which i am trying to get working in .Net.
Currently i am using the following ASP to post an XML file to [URL] . This then sends back an XML response.
Code:
I am trying to emulate this in VB.Net so that i can receive an XML response from the xml_url.
However i get an error warnign me that the following cannot be created:
Code:
As we know when a column divider is double clicked the column width resizes itself to fit its contents. How can we emulate this behavior with code?
View 1 RepliesTrying to setup a VB array (jagged array?) that has an entry for each rcd that contains the # of bytes in the data, as well the data. If it's possible how do you setup and loop through something like this is VB?
EX (1024 max bytes of data but it could vary):
struct inpRcd {
int rcdSize;
byte data[MAX_RCD_BYTES];
} inpRcds[MAX_RCDS]
How to emulate a mouse click with directinput?
like ive been searching for this for hours and can't find anything decent for VB 2008
Visual Basic 6 had the Text Box Array that worked great.It no longer exists(in the same form) in either Visual Basic 20085 or 2010.I know that there are work-arounds that emulate the Text Box array but these are certainly not as easy to use as the version 6 Text Box Array.
In Visual Basic 2010 there is a tool box item that can be added, called Text Box Array. However, this does not place a Text Box on the form and I can't find any explanation of how to use it.what adding this to a form accomplishes and how to use it?
I can load web pages into VS 2008 and then examine each component. Is there a way to load a web page in a browser control but not make it "active" - in otherwords, If there is a field for "Search Term" anmd a button for "Search", I want the prog to diosplay the properties of those elements rather than taking action.
View 7 Repliescode examples that emulate Windows Explorer?
View 7 RepliesI need to emulate an Excel Web Query in .net Below is the sample code.I get an Error500 when I attempt to do this in .net, however in Excel it works fine.When I change the URI to a normal website it works fine, and returns the html from the page, which i what i am after. I wonder if the problem lies from the fact that I am trying to return a datatable
Dim oHttpWebRequest As System.Net.HttpWebRequest
Dim oStream As System.IO.Stream
Dim sChunk As String[code]....
Edit: I am getting the error when I getReponse from the server
Anyone know how we can connect a USB cable to one of the ports on the computer and send keys to it and have that acted like it was a keyboard if the cable was connected to another computer? I'm sure the USB jump drive for example is like a mini-computer, so how do we do the same thing but with a computer? Is there any code in VB, .NET for this?
View 1 RepliesIs there a way to emulate the following HTML function in VB.net[code]...
View 2 RepliesI am trying to emulate the Wordpress post editor. Basically Bold, Italics, hyper links, bullet points, and numbering. Is there an application I can incorporate into my project and if so how would I do it.
If not, how can I reference text that the user has selected in a RichTextBox. Say they have the first 10 characters highlighted and the bold button is clicked, I would wrap it with <strong></strong>.Also, in a RichTextBox aside from an html editor, how can I justify the text within the box?
-Timers, but the timer lags too much.
-Stopwatch Class, still lags (little but still).
I need ms accuracy, my prg will replace a hardware stopwatch used in competition.
what I did was, I coded a HTTP web request "Browser". It's not a real browser but it's emulating a browser. It works fine, I'm using it to perform some searches without the clicking sound or audio from the pages (stupid ads).
Then thing is, it returns back the page's source code. There is a tag called "Block1". Now Since it's a string I can't just use str.document.getelementbyid("Block1").getattribute("value")but if the webbrowser can "emulate" then source code sent back from the HTTPBrowser then I can use it.
I have a serious dilemma! I have a com port COM3 and i USB device attached to it ! now when i use Hyper terminal and i can read and write to it using AT commands. for example when i type in "ATI" in hyper terminal it will return me a bunch of data how can i so the same using a VB program ? is there a way to emulate the functionality of Hyperterminal? I tried using System.IO.Ports and a SerialPort class but no success.
View 6 Repliesif there was a way to emulate the application.settings file's ability to do something like the following:
If I add an item to the settings file editor say Variable1 with a a value of "foo"
I can then go to my.settings.default. (and at this point) Variable1 is item that is an option after I type the '.'
Is there a way to do this for a collection? To where I have
Collection1. (and when I press '.' the name of an item would show up?)
I'm trying to automate using a remote ASP.NET website using the .NET WebBrowser control to simulate user input. I'm trying to call InvokeMember("click") on an image button on the remote site but it doesn't appear to be working and I suspect it is because the X,Y click coordinates that are submitted are both 0,0 (rather than representing real click coordinates). Is there any way I can programmatically set the submitted x,y coordinates to emulate a real click? (BTW I know I'm selecting the correct HTML element on the page so I've exhausted all other possible reasons why this is not working other than the x,y coords!)
View 1 RepliesI am using the VB.Net printing powerpack to emulate the old Printer.Print from VB6.The printed output sent to a pdf doc via cutepdfwriter looks ugly/strange.
View 14 RepliesWhat is the code for Hiding a mouse and make it go back when going to
Desktop1.vb
Cursor.Hide()
works
Cursor.Show()
is not working when going to Desktop1.vb .vb its still hiding what am i doing wrong here is my code.
[Code]...