I have multiple textboxes which I want them to perform the same thing upon clicking them. By default I can use the handles textbox1.click for 1 single textbox as shown below but I am not sure how to do handle multiples of them. Of course I can write a handler for every single textbox but I have about 50 of them. I am sure there must be a more efficient way. [Code]
View 4 RepliesI took a VB class a couple semesters ago and I did really well. Unfortunately, it seems as though we only covered the very basics within the class, as I feel rather clueless right now.
Here's my issue. I'm trying to write a program that will encode notes (like music notes, A-G#) which are entered by the user, into digits, 0-9. Now I have the system laid out, in that 1-8 will represent A-A, while a 0 or 9 preceding a digit will represent a flat or sharp respectively.
Now my question is actually rather basic, but I just can't seem to figure out how to do this. The user will enter the note sequence by clicking on buttons (12 of them). What I'd like to do is create one sub that will handle all possible button clicks. I suppose it's possible that I could have separate subs for each and every button; but it just seems more efficient and cleaner to have one sub that manages them all.
The part I have completed and working properly will display a message (the same message) in a messagebox each time any of the buttons are clicked. So I have the "Handles" part working for all 12 buttons. But what I'd like to do is write code, perhaps "If" statements such that If "btnA" is clicked, then say "You clicked Button A," and If "btnASharp" is clicked, then "You clicked Button A Sharp," and so on. Is it possible to do this somehow by recognizing which event was actually triggered?
I am creating a program using Visual Basic 2010 Express.
I want to make a Sub handling both MouseHover and MouseLeave events. Is this possible? And if possible, how do I differ between MouseHover event and MouseLeave event?
I had a question about handling multiple events in a sub, like this:
Private Sub Form1_MouseUpOrDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Me.MouseUp, Me.MouseDown
'do something
End Sub
Once the sub is called, is there any way to tell which event called it? (Whether it was a MouseDown or a MouseUp event?) Right now, I am doing a work-around as follows... having each event call the same sub and pass the info in. But it would be nice to not have that overhead.
Private Sub Form1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Me.MouseDown
ExecuteMouseUpOrDown(EventTypes.MouseDown, sender, e)
End Sub
[CODE]...
Don't use ACCESS, EXCEL, or a TEXT FILE as a database. If you want your program to use a "local database", without any of the hassle of setting up a MS SQL or MySQL server, just click this link: >>> SQLite <<<.
I am new to VB but I want to find this out. For example there are two objects in my form and when I press W,A,S,D then Object1 should move Up, Left, Down and Right respectively. Object2 moves when I press the arrow keys. How do I make them move together and also separately depending on whether the key is pressed.
View 8 RepliesIn old VB6, I could set all txtBox controls when members of the same index eg.txtBox(0),txtBox(1) etc., to all do certain things in a couple of lines of code, eg.
Private Sub txtBox_GotFocus(Index As Integer)
txtBox(Index).SelStart = 0
txtBox(Index).SelLength = Len(txtBox(Index))
[code]....
come years ago I bought an activex component to read some basic smartcard data. I created a simple form application and it has worked fine ever since. However, instate of a form application I now want to create a console application for the same purpose (the forms are unrequired and it just takes too long with multiple smartcards).
But I have been working on this for days now and somehow can't seem to get my events working. When I use 1 event, everything works fine, but as soon as I add my second event I get this error:
Unhandled Exception: System.Runtime.InteropServices.COMException (0x80040202): E
xception from HRESULT: 0x80040202
at System.Runtime.InteropServices.ComTypes.IConnectionPoint.Advise(Object pUn
kSink, Int32& pdwCookie)
[Code]...
I have multiple textboxes which I want them to perform the same thing upon clicking them. By default I can use the handles textbox1.click for 1 single textbox but I am not sure how to do handle multiples of them. Of course I can write a handler for every single textbox but I have about 50.
Sub TextBox1_click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.Click
If Button9.Text = "Make Changes" Then
If TextBox2.Text <> "" Then
Frm_Cine1.Show()
[Code] .....
Is it possible to have multiple click events for a button based on the button text? In other words, if I change the button text can i create a new click event based on that text but use the same button?
for example:
button1.text starts as "steel"
button2.text starts as "brass"
If I click button1 then the text would change to:
button1.text="Stainless"
button2.text="Cold rolled"
If I click button1 again a string would then be added to a textbox and the process would start over again. can I have a different click event or would I need to put an If/Then or Select/Case in the sub to handle this? I have 10 buttons I would need to do this with and each needing at least 3 different choices for each depending on the previous button press.
I wish to simulate multiple mouse move and click events for multiple mouse for emulation of mice in mouse mischief for a kinect project im working on. I want to emulate a mouse for each person on the kinect that is recognized using microsofts kinect sdk and be able to do a left mouse click for each person.
View 1 RepliesI'm calling the SQLDMO 8.0 COM library from VB.NET (using a PIA I generated with tlbimp) in order to backup a database with percentage completion notification:
Dim server As SQLDMO.SQLServer = Nothing
Dim backup As SQLDMO.Backup = Nothing
Dim restore As SQLDMO.Restore = Nothing
Dim backupAbortable As Boolean
Dim restoreAbortable As Boolean
[Code]...
I have a component written in C# which exposes an event which the clients can Handle. I would like know how to handle this event in VB.Net?
View 1 RepliesI need to write an app that that will iterate over our database, and perform various anaylsis on each record. In order to do this (partially for the learning exercise in creating plugin support) I want to use a Plugin model.
Currently, I have a simple Interface in my main app, which plugins can Implement. My app then loads all DLL's in a folder looking for ones implementing the Interface.
As you can see in the pseudo-code below, I have to keep performing a loop through all loaded plugins calling the process methods.
Sub ProcessData()
For Each Record In MyDataSet
For Each Plugin In MyPluginCollection
[Code].....
I have some VB6 code that instantiates a class which handles events that are being raised from a VB.NET component. The VB6 is pretty straightforward:private m_eventHandler as new Collection
public sub InitSomething()
dim handler as EventHandler
set handler = new EventHandler
m_eventHandler.Add handler
m_engine.Start
[Code]...
My problem is that when I debug the VB6 program, the first time InitSomething gets called, the event will not be handled (the VB6 event handler is never entered). Subsequent calls to InitSomething does work.
Everything works as I would have expected when I run the program outside the debugger. At this point, I'm not even sure if this is something I should be worried about.It may or may not be relevant but the VB.NET was converted from a VB6 using the Visual Studio code conversion tool (and subsequently manually cleaned up).
Work = New ExampleWork()Here the Work is a withevents variable and I've used the handles clause for handling various events fired by the ExampleWork object. However the event handler will not get assigned till the constructor of the ExampleWork returns. Now how can I handle any events fired from the constructor? I can move the constructor logic out to a separate method and call it after the constructor has returned and thus handle all the fired events including events fired from constructor. However it doesn't look good
View 2 RepliesHandling Events For An Array Of Controls
View 3 RepliesI am trying to make a UserControl or Component which can be dragged from the Toolbox onto a container control such as a Form or a Panel. Its purpose is to change the behaviour of that container. In particular, I would like to add functions to the container's painting and mouse actions. I DO NOT want to have to write code for the container itself -- that's the whole point of the Toolbox object.
I can do this by getting a reference to the object's Parent (or Host in the case of a Component) and handling its events, as this example illustrates:
[Code]...
However, I have heard that handling the events of a parent control conflicts with OOP principles. So I would like to know, does that objection apply in a case like my example? If so, what are the drawbacks? And what alternative techniques are available?
I know i can't create an array of objectsVB but i can make a collection of them. I have 15 textboxes and I want to create a sub that will handle all 15 textboxe's keydown event. I don't want to create a sub and call it from each textboxe's keydown event. Is this possible in anyway? can I handle the keydown event in one sub for all objects in the same collection?
View 8 RepliesI would like to use MS Office automation and have event handlers that fire for user-triggered events. For example, if the user clicks the save button in Word, I want to intercept that event and execute code in my program.
I don't want to be bound to a specific version of Word because I don't know what version my user will be running, so I instantiate a reference to Word using late binding. The problem is that the AddHandler and the Dim WithEvents commands require specific references to an object that is known at design time. Given this, how can I define an event handler without having an early bound reference to a specific version of the Word library?
I can try to a reference to an earlier version of Word with the expectation that newer versions of Word will be backwards compatible, but this seems kludgey and risky.
Assuming I have the following repeater.
[Code]...
But this has failed (The event is never raised)..
In order to take advantage of the spell checking ability of WPF textboxes, I have added one to a user control (with the use of elementhost). This user control is used in various window forms. My current problem is trying to handle keyup events from this textbox but the windows form is unable to "get" any event from the control. I can access the properties of the textbox just fine (i.e. text, length, etc.) but keyboard events don't seem to work.I have found, however, that the following will bring back events from the WPF textbox:
Public Class MyUserControl
Private _elementHost As New ElementHost
Private _wpfTextbox As New System.Windows.Controls.Textbox
[code].....
The user control is now able to do something after the PreviewKeyUp event is fired in the WPF textbox. Now, I'm not completely sure how to have the window form containing this user control to work with this.
Whenever we need to handle events, we do it by creating a method which handles the event. Without creating methods; is there some other ways of handling events?
View 6 RepliesI am trying to create a ContextMenuStrip where I add a certain amount of ToolStripMenuItems based on how many columns are in a DataGridView via code. I am wondering, since I am creating all these ToolStripMenuItems in code, how would I handle the "CheckStateChanged" event on all of them separately? Or how can I figure out which one of those ToolStripMenuItems was clicked?
Here's a code example of what I mean:
Private Sub CreateCMS()
Dim CMS As New ContextMenuStrip
Dim TMS_Main As New ToolStripMenuItem
[Code].....
[2005] Handling Events With ToolStripMenuItems Created With Code
View 2 RepliesI'm writing a tabbed web browser for someone who is learning VB.NET, and I have got to the point where I can add/remove browser controls into tab pages, controlled by one set of buttons on the main form, but I can't handle events from the WebBrowser objects.I have tried this but it says that 'DocumentTitleChanged' isnt an event of 'Control'...
Dim browser As New ArrayList
browser.Add(New WebBrowser)
browser(0).parent = TabControl1.SelectedTab
browser(0).dock = DockStyle.Fill
AddHandler browser(0).DocumentTitleChanged, TitleChangedHandler()
I want to update the tab title with the web page title when it changes. I started using a timer to update the tabs but there must be a way to add an event handler here.
the question is really what is the correct convention (style) for raising and handling events. When a button is clicked it is generally handled by this method. [Code]
I have recently been trying to follow this convention by creating my own EventArgs class and inheriting the system.eventargs, Then adding my own properties. The problem is as my projects get bigger/complex I seem to be writing multiple eventarg classes. I then decide to try and create a generic eventarg class but this then seemed pointless thinking it would be easier just to pass the object directly instead of wrapping it up in "someEventArg" i have created.
I am writing an Automation program to control an MS Acces applcation. Here is the sequence of events:
- Load MS Access Database (Done)
- Load an MS Access form (Done)
- Take dates from Main.VB and populate 2 fields in MS Access form (done)
- Load another MS Access form called Stage_2 (Done)
- Load a file name into a filed in the Stage_2 form (Done)
- Do a click event in MS Access linked to a button called Pre_Stage_copy on Stage_2 form (How do I do these?)
- Do a click event in MS Access linked to a button called Pre_Stage_import on Stage_2 form (How do I do these?)
I have a solution in Vb.NET 2008 windows Form with ToolStripMenuItems, but I need to implement menu navigation without any mouse intervention.I only found mouse events In ToolStripMenuItems, MenuStrip, etc.All MenuStrip and ToolStripMenuItems are created programatically, reading user permissions from Database, then add a handler to manage the events, but the client don't want mouse interaction, he wants only keyboard inputs only ![code]
View 2 RepliesI have various input textboxes on my form. And based on entries made in each of the input textboxes, I update the display textbox. However, using AppendText message of textbox. I have my input textboxes set to accept only numeric values. So for each character inputted correctly, I update the display Textbox. Problem I have is when user selects Key.Back or Key.Delete, what I would like to do is do a Delete of last character in the display textbox, but I am yet to get this right. How do I delete the last character in the string that is contained in a TextBox using AppendText()
[Code]...
When my form loads i create an array of richtextboxes. Since they're created dynamically i don't know how to do events like, textchanged or click, for each richtextbox. I'm pretty new to vb and to the forum. I'm not sure if i've posted this in the correct place on the forum if not apologies.
View 5 Replies