[code] I'm basically trying to see if a record already exists. My problem is when I run this I get a "ArgumentNullException was unhandled" error It occurs on the line "dbAdapter.Fill(output)" in the sub.
View 5 Replies
I'm getting the following exception when I try to run up my Winforms app and haven't been able to find a solution to it:
System.ArgumentNullException was unhandled
Message=Value cannot be null.
Parameter name: activationContext
[code]....
I've added a handler for the "unhandled error" event in the applicationevents class but it never reaches that stage and there is no source code running that I can break into and diagnose.
The application was fine until I added a user control (nothing fancy, just a standard windows user control) and then dragged it onto a form in the app (user control and form were in the same application). The application builds and compiles without any errors or warnings but when I attempt to run it up I get the above error straight away.
Does anyone have any idea what it could be or even how I can go about investigating it? I'm a bit stumped on this one as I'm not sure how to investigate it. I removed the user control from the form and then I removed the user control from the application entirely but the error hasn't gone away. In all honesty the addition of the user control might be a red herring but the problem manifested straight after adding it.
I have written an MDI text Editor and I have written a "save" sub routine, please see below
'This sub routine updates the current document or calls the save as routine
Private Sub SaveToolStripButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripButton.Click, SaveToolStripMenuItem.Click
[code]....
I am testing this sub routine today and it throws up an error during runtime when a new document is created and the user (me in this case) writes a few lines of text, I click the save toolstrip button and because its a new document, the save as sub routine is supposed to be be invoked, however the application stops running and I get this error message "ArgumentNullException was Unhandled" from Visual Basic.
ok so i viewed some other question that are ruffly the same and i am still confused, here is the stacktrace
at Game3.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at Game3.My.MyProject.MyForms.get_Character_Creator()
at Game3.My.MyApplication.OnCreateMainForm() in C:UsersMasonDocumentsVisual Studio 2010ProjectsGame3Game3My ProjectApplication.Designer.vb:line 35
[Code]...
also, where is game3.my.myproject, obviously its a line of code but what is it in.
I am using 2005 and I am getting a ArgumentNullException when I try and debug my program. I have included the error and a piece of the code. I am not sure how to fix this error at all. If more of the code is needed I can post it.
Public
Class MainForm
Dim sPIServer As String 'PI Server Connection Storage Variable
Dim myServer As PISDK.Server 'Variable to hold the server to work on[code].....
why this gives an error at run-time:
Dim mightBeNothing As List(Of String) = Nothing
Dim a As List(Of String) = IIf(mightBeNothing Is Nothing, New List(Of String)(), New List(Of String)(mightBeNothing))
I am getting ArgumentNullException on the second line. If I replace the last part with:
Dim a As List(Of String) = IIf(mightBeNothing Is Nothing, New List(Of String)(), New List(Of String)())
It works - but the constructor New List(Of String)(mightBeNothing) will never be called if mightBeNothing is nothing, so what is the issue?
i have an ASP.NET page which has a numebr of user controls within it. There are 2 user controls which are of interest. I need to display either one of them or neither of them, depending on the record selected previously.
In the user controls I need to set properties of some controls which are in a FormView. So in my user control code-behind I have a number of properties which look something like this:
[Code]...
I've been having problems with following code on some computers, while it's worked super on others (most):
Dim xmlSer As New System.Xml.Serialization.XmlSerializer(GetType(XMLContext))
which produces the stacktrace:
System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Xml.Serialization.XmlSerializer..ctor(Type type, String defaultNamespace)
How can that code throw that exception, when the argument is drawn from a gettype call, and note that it doesn't happen when debugging on my own PC, only when it's installed on some of the client PC's???
i am in project of medical billing.i am on LogIn form in vb.but i have Erro - "InvalidOperationException was unhandle " and while i was run program it didn't say which line i had error.
here is my code.
Imports System.Data.OleDb
Public Class login
Inherits System.Windows.Forms.Form
[code].....
I have made a tic tac toe board and when i go to debug the application i get a "NullReferenceException was unhandled".
this happens diring this part of the code:
Dim x As Integer = Val(index.Chars(0))
Dim conn As New OleDb.OleDbConnection
Dim ds As New DataSet
Dim da As OleDb.OleDbDataAdapter
Dim sql As String
[code]....
The above code stops running at the point of the da.fill line with the error that the specified table does not exist.In my limited knowledge so far to me it looks like the operators table exists as it showing in the Solution Explorer.
Trying to port old code from VB6.
Public CHandles() As Long
Public SHandles() As Long
Public rerrors() As Long
[code]....
Generates a SafeArrayTypeMismatchException was unhandled. Specified Array was not of the expected type error.I assume it means the SHandles, rerrors, and CHandles arrays but not sure.
The exception is thrown in a defined class when trying to call a Sub procedure.
The main Form1:
Imports TeenyStudent.Student
Public Class Form1
Private students As Array = Array.CreateInstance( _
GetType(Student), 20)
[code]...
I'm getting a "TypeLoadException was unhandled" error. The description says Could not load type 'dnUtilities.OtherFunctions' from assembly 'dnUtilities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'.
So i've got a class library project. I've built that into a dll and am referencing it in a project in another solution. The name is "dnUtilities" and i've stored a lot of subs and functions inside it. I just got this error when i added a new module and tried calling a sub from it. I've got no idea why this error is happening since all the other functions from the other modules work. Besides modules i've also got a usercontrol in the dll. The framework of the dll and my calling project are both 3.5.
I was testing out an application that I created which then I recieved an error as said in this topic title. The application that I am making is one where it requires 2 form GUIs, my main one is called frmConferenceRegistrationSystem (the first picture) and my secondary one is called frmConferenceOptions (The second picture) and what they are supposed to do overall is total up the cost of registering for a conference that is selected in frmConferenceOptions and the error that I am recieving is within the ElseIf statements in the frmConferenceOptions form (third picture and first section of code) And also here is the rest of my code for both of my form GUIs at the bottom of this topic
If ltbList.SelectedItem(IntrotoECommerce) And ckbConferenceRegistration896.CheckState = CheckState.Checked Then
My frmConferenceRegistrationSystem Code:
Public Class frmConferenceRegistrationSystem
[code]....
I am making a simple calculator and it's saying InvalidCastException was unhandled when I try to debug it, here's the code, please tell me whats wrong with it: (and yes I have renamed the textboxes to addequals etc...
Public Class Form1
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs)
End Sub
[code].....
i have a probleam with my coding.The error which i got is olehDBexeception was unhandled.In my coding here i am developing function use to subtract number in database based on user input.I dont how to solve this error? I also highlight the line cause an error and also i attach picture of the probleam.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'open db connection'
[code]....
All, I am trying to have my program self terminate, (the equivalent to clicking the X close program). I want my 2010 program to run and then stop.
I have tried the me.close() but I get the error:ObjectDisposedException was unhandled
The code works fine, and I do get the file created, but.... I get the error.
Here is my short
Public Class Form1
Public Sub New()
Dim buffer1 As String
[Code]......
I am getting a NullReferenceException was unhandled error when i run my debugging in this part of my code: Dim x As Integer = Val(index.Chars(0))
what can i do so this will stop and my program will work?
im am trying out this code but it keeps giving an error msg but i cant see where the error is...
query = New OleDbCommand("INSERT INTO studenttable(sname,scourse,syear,ssemestor,sgrade)values('" & TextBox1.Text & " ',' " & TextBox2.Text & " ',' " & TextBox3.Text & " ',' " & TextBox4.Text & " ',' " & TextBox5.Text & " )", con)
con.Open()
query.ExecuteNonQuery()
con.Close()
I have some trouble in SMS gateway project using VB.Net (VS 2010)while programme was running, I found error "InvalidCastException was Unhandled", then my programme cannot continue. below I copy the code of the programme :
----------------------------------------------------------------------------------------------------------------------
Option Explicit On
Public Class MessageReceiver
Private TPMessageTime As String
[code]....
When editing my DGV (SSN number 123-12-0000 to 123-12-1000), I am getting an error.
Unable to cast object of type 'System.Windows.Forms.DataGridViewTextBoxCell' to type 'System.Windows.Forms.DataGridViewCheckBoxCell'.
in the following code
Private Sub dgvResults_CellValueChanged(ByVal sender As Object, ByVal e As DataGridViewCellEventArgs)
If (Not IsHeaderCheckBoxClicked) Then
RowCheckBoxClick(DirectCast(dgvResults(e.ColumnIndex, e.RowIndex), DataGridViewCheckBoxCell))
End If
End Sub
It happens after I press enter or move focus to another column. Any idea why this is happening?
Here iam trying to insert some values to SQLServer 2005 Database.The following error displaying.I changed the corresponding column size,still the error persists.how can i sove this error-:
'String or binary data would be truncated. The statement has been terminated'
iam trying to insert some values to SQLServer 2005 Database.The following error displaying.I changed the corresponding column size,still the error persists.how can i sove this error-:
View 4 RepliesI'm trying to call a C++-compiled DLL from VB.net and I'm running into some problems. Seems like there's an obvious solution, but I can't figure it out.Here is the function declaration in C++:
MyFunction(int trailingaveragesize, double sigmasize, int myflag, int sizeSeries, double *Xdata, double *Ydata, int sizeinputparameter, int *averagePairs, double *PositionsSize, double *PnLSize)
Here is how I'm calling it in VB.Net:
[Code]...
i debug my code it says that i have a syntax error in Insert into statement and it highlights the
da.Update(ds,"MovieData") command ?? Why isn't this working?
[Code]...
I have the follwing codewhich transfer the value from NumericUpDown64 to the array Conc(0,0) which is part of the structure USerInput:
UserInput.Conc(0, 0) = NumericUpDown64.Value
When I run the program I recieve the NullReferenceException was unhandled. Object reference not set to an instance of an object.
nullrefererence exception was unhandled. I'm getting this error. could someone pls help
here is my code
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
WebBrowser1.Document.GetElementById("Email").SetAt tribute("value", TextBox1.Text)
WebBrowser1.Document.GetElementById("Password").Se tAttribute("value", TextBox1.Text)
WebBrowser1.Document.GetElementById("Signin").Invo keMember("Click")
End Sub
I have some code that uses the Windows Media Player Library capabilities to get around using ID3 tags. I keep getting this error however, whenever I add 1000+ songs to the datagridview:
For Each File_FullPath As String In My.Computer.FileSystem.GetFiles(My.Settings.Path, FileIO.SearchOption.SearchAllSubDirectories, "*.mp3", "*.m4a")
Dim WMP As New WindowsMediaPlayer
WMP.URL = File_FullPath
[code]....
Here is the code I'm using that gets the error:The problem is I need a way to clear the WMP.mediaCollection, but I don't know how.
I have created a vb.net console application when i am running the source code it will work fine.But when i am running the Executable file it is throwing an exeption like "System.TypeInitializationException was unhandled".In my application i have used MCL PrinterMonitorComponent
my code is:
Imports PrinterQueueWatch
Imports SpoolMonitoringIPC
Imports System.Data.SqlClient
[code]....
