Make Calculations Using Individual Cell Data ?

Jun 18, 2012

I have a unbound datagridview which i use to enter data. I would like to make calculations using individual cell data as follows:-

Datagridview1.rows(0).cells(1).value = datagridview1.rows(1).cells(1).value + datagridview1.rows(1).cells(2).value

This works fine but if im using lots of cells it can be quite confusing .I was wondering if there was a way that i can give a cell a unique name so i can be easy for me to identify. Using the above example it could read TOTAL = JAN TOTAL + FEB TOTAL

View 4 Replies


ADVERTISEMENT

How To Make Cell Calculations

Jan 26, 2012

I have a datagridview which as several rows read from an access database which I can not alter. Column 4 of each row shows the date of the last service call. I would like to have a calculated column showing the difference in days between the date in Row1 and the date in row 2, the date in row 2 and the date row 3 etc.. I have exported the datagridview to excel and have set the calculated column it works ok, but is is possible to do this from within VB datagridview

View 7 Replies

Programmatically Change Foreground Color And Make Bold Text In Individual Cell Location On DataGridView Control?

May 5, 2010

How to programmatically change foreground color and make bold text in individual cell location on DataGridView control (Visual Basic)?

I use "dgMatrix.Rows(r).Cells(c).Value = x" to assign individual numeric values to individual cells in a DataGridView control. My question; is there a similar way to change foreground color and make bold the text in this cell, by specifying the individual row/column cell location?

For example; for cell (row 3, col 5) in the DataGridView make text in cell say red and bold or blue and bold so as to highlight and distinguish individual cell contents. As needed, I will also need to reset these properties (foreground back to automatic/black and font from bold back to regular); the reset could be done globally to the whole DataGridView as opposed to indiviaually by cell.

View 1 Replies

Individual Cell Background Image?

Apr 20, 2009

I want to programatically add a background image to individual cells in a datagridview for easy identification, prefirably in the right bottom corner of the cell.

View 3 Replies

Splitting A DataGrid Cell Value (Numeric) Into Individual Numbers

Oct 17, 2010

I am having dificulties taking a datagrid cell value stored in the following location (datagridVNTPSorted.Item(15), irow).Value) into individual digits to reassign values for counters.

The cell in the datagrid (Listed Above) contains a number between 1 and 5624. I have 4 different counters. If the number was "2856", the counters would need to be updated as follows:

intdirectoryCountDigit1 = 2
intdirectoryCountDigit2 = 8
intdirectoryCountDigit3 = 5

[Code].....

View 2 Replies

VS 2010 Change Background Colour For Individual Cell In Datagridview?

Jan 12, 2012

dgv_WorkHistory.Rows(i).Cells("DateOfWork").Style.BackColor = Color.GreenThis doesn't change the background colour - what am I doing wrong here?

View 16 Replies

VB 2008 Code The Calculations For A Pocket PC Application That Calculates The Cost Of A Cell Phone Bill?

Feb 19, 2010

I'm having trouble figuring how to code the calculations for a Pocket PC application that calculates the cost of a cell phone bill. From a Pocket PC the user should enter the number of minutes used during the past month, in order to calculate the cost of the cell phone bill. The plan allows 300 minutes for $29.95 per month. For each minute over 300 the cost is $0.17 cents per minute. Tax and Fees are $4.85 a month.

1. User enters the number of minutes used during the past month.

2. Based on plan rate of 300 minutes for $29.95 and 17 cents for each minute over 300 calculate the cost of the bill including the fixed cost of $4.85.

3. The user must be able to initiate the calculation and display the individual charges and the total cost of the cell phone bill.

4. The user should be able to clear the number of cell phone minutes, the individual charges and the bill total

If negative number is enterd for the cell phone minutes, the user should be advised and asked for a valid entry If non numeric value entered for the cell phone minutes, or if left blank the user should be advised and asked for a valid entry.Application is deployed on the Pocket PC emulator built in VS 2008

Enter # of Minutes ________ (user enters)
Regular Minutes Charge ___ (29.95)

[code]....

View 1 Replies

Make DataGridView TextBox Cell A ComboBox Cell When It Has Focus

Dec 23, 2011

I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.

Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.

Exception: "Provided cell does not belong to this DataGridView control."

Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)

[Code].....

View 3 Replies

DGV - If User Edits Cell Make Cell Bold

Mar 3, 2010

DGV.. if user edits cell make cell bold

Is there a way to check if the cell has been changed via DGV without calling getchanges() on DS on every cell edited?

when user enters a cell and changes a value i would like it to change font to bold for that cell.

View 3 Replies

Access A Txt File - Retrieve Individually To Make Further Calculations?

Apr 22, 2011

I am trying to access a txt flie in my project. This file contains many records that I wish to retrieve individually to make further calculations with.My first problem is how to connect to the file in my project, I have no clue howw to do this, have tried many different ways, but still no success.I also wist to have a textbox that I can type the (airport name) so that the streamreader will search for that record, similar to a google type search.

View 11 Replies

Input Several Boxes Of Data On One Form And Display Individual Pieces Of That Data On Several Other Forms

May 22, 2009

I have just started with vb and would like to know if there is a way to input several boxes of data on one form and display individual pieces of that data on several other forms at timed events in the future?

View 1 Replies

Multiple Forms / Make Each Individual Checkbox?

Jan 4, 2011

I need to make a program (or if someone wants to make it for me, feel free to do so) that has a starter form with a combobox where you can select different sizes, like 2x2, 4x4, 6x6 and so on. When i then press the button to choose size, a new form would pop up , with 4 different grids of checkboxes, (white, red, green, blue).Do i have to make each form (frm2x2, frm4x4) and make each individual checkbox, or is there some other much greater solution?Because, in the end, i don't feel like naming 576 different checkboxes for just 1 form.

After all that has been made, it would be saved to a text file, with 0 being anything thats unchecked, 1 is white, 2 is red and so on. And it would look something similar to this:

[Code]...

View 3 Replies

Use Data From Dataset In Calculations?

Nov 18, 2010

I need a little guidance in the right direction to help with using data from a dataset in calculations. I've watched the "How Do I" Series and it was very helpful in setting up the relations and tables. I have setup a couple tables to hold values that won't
be updated and the user will never see. Lets say I have 5 columns, ColmnA to ColumnE, and the row count is variable. What I can't seem to find is an easy way to loop through using the variables. As an example, Lets say the equation would be outputted to a
textbox:

textbox1.text=row1(ColumnA*ColumnB+ColumnC^ColumnD-ColumnE)+row2(ColumnA*ColumnB+ColumnC^ColumnD-ColumnE)+etc to end of rowcount

Does anyone know if a good tutorial to point me in the right direction or a code snippet that may get me started to follow the logic? I'm using VS2010Express with a SQLExpress database if that helps.

View 8 Replies

Display The Column Header And Cell Value Of The Clicked Cell In The Data Grid?

Dec 1, 2011

I need to display the column header and cell value of the clicked cell in the data grid. For example if I click Argentina from the country column, the text box will display country = Argentina.So far the code I have is, please help me figure out the code for displaying the information in the text box

Private
Sub
DataGridView1_CellClick(ByVal
sender As

[code]....

View 2 Replies

Display Individual Parts With Individual Prices

Jul 11, 2011

So I have a code atm that has 2 combo boxes, one to select the make, then it will enable the model, I have 3 model choices, here's code: [code] Once I have selected my model of the car, it takes me to that specific form with a picture of that model, I then want to display individual parts, with individual prices that will add up in a text box above.

View 2 Replies

Implement The Use Of Enter Key When Entering Data And Moving From Cell To Cell?

Feb 17, 2009

I wanted to implement the use of Enter key when entering data and moving from cell to cell. How am i going to implement that?

For example:

Text Box 1: Date: 02/02/2009
Text Box 2: Name:

then after entering the date on the text box i wanted to move to Text Box 2using only the Enter key.

View 4 Replies

Loop Through Data Table And Perform Calculations?

Jan 12, 2011

I have an Access database that has thousands of records. The fields in the database are EMPID, FIRST, LAST, JOBTYPE and PAGES. I would like to know how to loop through the database and for each individual EMPID to calculate the sum of the PAGES foreach JOBTYPE. There are four JOBTYPE's: "E", "K", "O" and "R".

Her is some code:
Dim
WebAllEmployeeQuery As

[code].....

View 12 Replies

Decimal Data Type Loosing Accuracy During Calculations?

Dec 24, 2011

I have to display all the digits of 2^90. This is within the reach of the Decimal format which can display up to 2^96-1. The Decimal format stops displaying after the 15th digit.The real answer for 2^90 is : 12 379 400 392 853 802 274 899 124 224 (29 digits)

Here is what I do:
Dim a As Decimal = 2^90
TextBox1.Text = a

[code].....

View 4 Replies

VS 2008 Loop Through Data Table And Perform Calculations?

Jan 13, 2011

I have an Access database that has thousands of records. The fields in the database are EMPID, FIRST, LAST, JOBTYPE and PAGES. I would like to know how to loop through the data table and for each individual EMPID to calculate the sum of the PAGES for each JOBTYPE.There are four JOBTYPE's: "E", "K", "O" and "R".Here is some

Dim WebAllEmployeeQuery As String = _
"SELECT ELPallEmployees.[EMPID], ELPallEmployees.[FIRST], ELPallEmployees.[Last], ELPallEmployees.[JOBTYPE],

[code].....

View 2 Replies

VS 2010 - Store Data From A RTD Server Into A Array For Calculations?

Jul 16, 2010

Does anyone know how to store data from a RTD server into a array for calculations...?

View 2 Replies

How To Get Data Into Excel With Individual Columns

Apr 23, 2012

I am retrieving the data from AD and sending it to th CSV file. but the data is not coming in Column1,column2 and Column3. Can you guys help me with formatting.[code]When i export the data to Excel the 3 fields i am retrieving are merged. Can you guys help me on how to get the data into excel with individual columns?

View 4 Replies

Calculations For Data In Datagridview Dynamically Loaded From Access Database

Feb 2, 2010

I have a database that dynamically loads from Access into a datagridview. I have to enter data manually into one column in this datagridview. I need to be able to perform calculations to this data, for example I need to sum the data in this column, sqaure it and substract it from individual sqaures of the data in the cells. I should be able to sum it sum(22,33,44,53,67,23)^2-sum(22^2,33^2,...23^2). The number of columns keep changing depending on the database I choose to load, so I need to code this dynamically too. I am not really a VB person. I did the same in excel using Visual Basic and I am trying to do it in this Visual Basic environment.I built a tool in excel(VBA) that do some statistical calculations and data analysis and I am trying to build the same in Visual Basic.

View 10 Replies

Post A Windows Application That Uses Excel For Live Data Calculations?

Jul 14, 2009

Can I Post a Windows Application that uses Excel for live data calculations? Basically from the Windows app, a user makes a menu selection and which in turn opens an excel file in memory using it for calculations. These files are put together by different groups and formatted for the Windows app to build interfaces based on each file.I also accompany an .mdf file as well. Is all this possible for customers to access and run this with Windows Azure.

View 2 Replies

Getting Data From Individual Elements In Access Database?

Oct 24, 2009

I have an access database with one table and 4 or 5 different fields.

All I need to do is be able to be able to use a loop to read the values in a specific row and column and store it in a variable (or array).

I don't need the code for the loop or anything, just the syntax for reading the value of a specific row and column in a table to a variable.

View 3 Replies

Set The Format Of Individual Row In Data Grid View?

Jul 31, 2011

I have datgridview with 12 numbers of rows. I set the format through collection like
Format= N2 but i want row number 5 shows four decimal places instead of two? How i set it?

View 5 Replies

Set Width Of Individual Columns In Data Grid?

Aug 6, 2009

How do we set width of individual columns in data grid ?

View 4 Replies

Parsing A Text File In Order To Extract Data For Subsequent Calculations?

Oct 21, 2010

I am using Streamreader to read a text file containing data such as the following:

IN;SC;PU;PU;SP1;LT;VS10
IN;SC;PU;PU;SP1;LT;VS10
PW5;PU4179,27448;PD4179,29951;PD3244,29951;PD3244,30286;PD5494,30286;PD5494,29951;PD4555,29951;PD4555,27448;PD4179,27448;

The final goal is to use the numbers next to the PU and PD characters to perform specific calculations.

Essentially, I think the code needs to do the following:

1. Read each block of characters ending in a ";"

2. If the block commences with anything other than PU or PD, discard it

3. Extract the numbers in such a way that calculations can be performed. The following is an example:

x y
PU4179,27448;
PD4179,29951;

[Code]....

Essentially, there will be hundreds of these rows and I will need to sum up the deltas so that a specific formula can be applied.

I have tried doing this a number of ways but each seem very inefficient (using text boxes to store/swap data and creating additinal text files are 2 methods I have tried) and so I'm looking for some direction.

View 3 Replies

VS 2010 - Most Efficient And Speedy Data Structure In Order To Carry Out Calculations

Mar 12, 2012

Which is the most efficient and speedy data structure in order to carry out calculations on it?. I have seen, collections, arrays, list arrays, databases and more. I would prefer to write just straight forward code that will be effective and which I can still understand. What I would like to do initially is have the ability to add new draws to the end of the file, edit the individual files and delete lines if required.

File would then be reformatted to show the corrections made. Some kind of data entry window is envisioned. As far as number crunching goes, I would like to make counts of each number in each of the columns , calculating averages, times since last drawn and so on.

Without being too long winded, I would eventually like to find triple combinations and maybe use them as predictions. So there you have it. This way I won�t have to go off on the wrong path, on a data structure that may not be able, or be too slow for the tasks at hand.

View 5 Replies

Save Data In DGV And Individual Tables Into User Accounts

Mar 12, 2009

I have never worked with datagridview before. I need to know how to use it so i can use it in my (calculator) program. I would like to know how to make columns, rows, linking the cells in the table/grid to textboxes so values entered into the textboxes (on the calculator) after pressing save goes straight to the table.

View 1 Replies

Create A Small Application That Can Make Small Calculations?

Feb 1, 2010

On form 1 , i have a number of buttons that open up different websites.What i want to do is when i click a button on form 1 , i want forum 2 to show ( Form2.show() ) , Form 2 will have a list (Buttons) of internet browsers.

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved