1.how can i resize my project's form1?i mean my form1 only has fixed size.when i'm trying to maximize the form(by click a square on the top right corner of the form) my form remains in the same size even the window has fullfill my screen.
2.how can i make my project to become an installer?
3.how to make exe file from the project?
I am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private
Sub scrHoriz_Scroll(ByVal
sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
I have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
View 1 RepliesFollowing default the datagridview will scroll following vertical. How can i do that. I tried :
DataGridView1.ScrollBars = ScrollBars.Horizontal but not work
how do you make a richtextbox scroll down automatically when text fills the screen so that the new line can be seen,
View 2 RepliesI'm using VB in Visual Studio 2010
When I resize my form at run time (border set to sizeable) .Net automatically adds scroll bars.
I can pick the vertical scroll bar ok but on the horizontal scroll bar it always shows the resize cursor and so I cannot pick it.
Is there some way of controlling the zone within which the resize cursor is active or the active width of the border detection?
How would I get the width of a Horizontal Scroll Bar? I'm not talking about the Hscroll width properties... I know the default width in vista is set to 17 pixels. I'd like to know if someone has changed their scroll bar width to a custom setting. Does that make any sense?
[Code]...
Is the Horizonatal scroll bar an available tool in VB10. If so where is it?
View 5 Replies I am trying to control the horizontal scroll of a panel box in vb.net. The problem is that I can only seem to move it just a little bit using the following code:
Private Sub HScrollBar1_Scroll(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ScrollEventArgs) Handles HScrollBar1.Scroll
panSS.HorizontalScroll.Value = HScrollBar1.Value
End Sub
[Code].....
I'm coding in VB.Net 2010. What's the most efficient way to create a horizontal scroller (i.e., marquee)? I've found some dead threads and ways to do it in older versions of VB, but I'm not finding anything particularly recent....
View 4 RepliesSince the map image is bigger than my screen resolution 1280 x 1024, a horizontal scroll bar is shown. I use Location x and y to place icons, but the problem is:placing an icon at location (0, 0) when the horizontal scroll bar is at left-most position is different from when the horizontal scroll bar is at right-most position...If I move scroll bar to x-axis(right) 10 thenplacing an icon at (0, 0), should be (0, 0) but it is placed at (10, 0).n this case, is there any different approach?
View 1 Replieshow can I enable horizontal scroll bar for datagridview control?
View 4 RepliesSo I have a custom listbox that is displaying garbage text when scrolling horizontally. I need the custom listbox to stop an annoying flicker, but it's causing issues with the scroll. I think I could solve the issue if only I could access the hscroll event, but I don't know how to do that. I will put down my custom listbox class just in case you will need it to understand the problem.
Edit: I realized my question is a little vague - telling me how to access the hscroll event within the listbox will suffice
Public Class DoubleBufferedListBox
Inherits ListBox
Private resizing As Boolean
[Code]....
I am developing windows application in visual basic .net 2005. I am using datagridview and i want to handle its horizontal scroll event. i was using code below,
[Code]...
i have a datagridview with the scroll bar property's set to "both", but when the data is too long horizontally it wont show the horizontal scroll bars only the vertical. And instead it puts "..." The DGV isn't docked, or bound to any data source, im adding data programmatic
View 2 RepliesI have the following code to resize the datagridview but the vertical and horizontal scroll bar are not shown when there are colunns and rows exceed the width and height of datagridview objects.Bascially the following code is similar to dock to the botton, the only difference is docking to the botton change the Y position of datagridview and fill the botton section whereas my code fix the Y position of datagirdview and fill the bottom.[code]I have tried with the dg.ScrollBars = ScrollBars.Both but it it is not working as well..May i know how to get both scroll bars working.
View 5 RepliesThe following zipped up Visual Studio Solution on Skydrive is immediately buildable and runnable; a usercontrol on a Form. Problem? If you click on any of the Edit Buttons and move the Horizontal Scroll, the values as they change in the Label_Values are off by one when you release the slider button. I think this is a timing problem between the Paint handler and the Horizontal Scroll event handler at the very bottom of the User Control code. Sorry I didn't eliminate
View 2 RepliesI'm using a RichTextBox and wondered if it's possible to change the height of the horizontal scrollbar. I don't hve much room to fit the RTB so I need to reduce the height of the scrollbar.
View 2 RepliesI Want Just Ask If It's Possible I Have A RichTextBox And I Wanted To Detect If The Control Needs A Scroll Bar But Without Performing The Any Other Function (Without Changing The Text).
View 1 Replies1) disable the scroll bar on a richtextbox
2) transfer all scroll capability to a standalone scrollbar control
I need to jump to the last viewed position of the text in my richtextbox when I open my project again.
I used GetScrollInfo to obtain the position of the scroll box within the scroll box.
How do make my application to jump to this same location on the scroll bar and also within the text in the richtext control?
I am using VS 2008 with .NET Framework 3.5.
i'm implementing search on a richtextbox and i want to auto scroll up/down left/right when needed. i tried ScrollToCaret but it always scrolls. even when the searched text already presented on the shown part of the text.
View 2 RepliesI would like to be able to vertically scroll some text in a richtextbox control in a loop so when it reaches the last line in the richtextbox it jumps back to line 0 and starts over, I can figure out the scrolling using code:
[Code]...
Which is placed in a timer but I am not sure how to reset the scrolling back to the top once it has been through all the lines of text. Using the above code just seems to go on forever even if there is no more text to show... I tried setting the POINT values to 0 but that does not help.
Has anyone got some ideas on how I can do it, I want to use this code as it gives a nice smooth scroll efect.. how can I reset the scroll position back to 0/the top of the richtextbox?
what i want to do is have a richtextbox lets say this is the text
1
2
3
4
[Code].....
and i what i want to do is have a timer and have it scroll down line by line so each letter gets show and some letters go off the richtextbox cuz its small
I am working in vb2008. I understand how to set a richtextbox's selectedstart property to a text block using .find. I would like to know how to tell the richtextbox to scroll to the selected position based upon the find operation and show its position at the top of the window. I would like to pass text blocks into my richtextbox control and have the control automatically scrolll to that position if the text block is found.
View 2 RepliesI am working on porting a VB6 application to .NET and one of the desired UI elements is a horizontal listbox.I can't seem to figure out how to replicate this in .NET.
[Code]...
I want to be able to have a richtextbox scroll event synced with the scroll of another richtextbox. Do any of you know how this is possible
View 4 RepliesI have a RichTextBox and I need to find the position of the vertical scroll bar.
Is there any way to do this without Pinvoke? If not, what is a way to do this WITH Pinvoke?
I need to return an integer value.
I am new to programming- basically I have a richtextbox1 with some data from the database,but when you scroll it scrolls 3 lines, whereas I want to scroll only one line at a time.
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
Dim mySelectQuery As String
[code].....
I'm designing a form with a horizontal scroll bar docked at the bottom. I wanted to add support for side-scrolling using mouse tilt buttons and found this solution which, after a bit of tinkering, seemed to do the trick - that is, while the form only had GDI graphics drawn on its surface.
However, since then I've added some controls to the form and found that when the mouse is over any of them the tilt operation only fires once-at-a-time instead of repeatedly as it does when the mouse is over any other part of the form.To see what I mean (if you have a mouse with tilt buttons) dock a horizontal scrollbar onto the bottom of a form, add a few other controls and paste in this code:
Public Class Form1
Const WM_MOUSEHWHEEL As Integer = &H20E
Protected Overrides Sub WndProc(ByRef m As Message)
[code]....
You'll see that side-scrolling repeats when the mouse is over a blank part of the form, but only "one-shots" when it's over a control.I'm guessing the solution lies somewhere in the message's .Result value, but I'm at a loss as to what that should be. In fact I'm not even sure I'm returning a correct value anyway because the code in the original solution threw an exception to the DirectCast function so I swapped that for CType, which seemed to work okay. I've tried working it out using Spy++ but I can't see anything obvious.
UPDATE:I've noticed when I include 'Child' windows in Spy++ there are two (0x020E) messages and two return values, 1 then 0. I presume the message is being passed onto the control by the form. So I guess the question now is: can the message be prevented from being passed to the control? Or can the control's return value be intercepted and converted to 1?