How do you prepare a service solution in VS2005 to use with installutil.exe?I receive the message,Quote:No public installers with the Run Installer Attribute.Yes attribute could be found..This is the first time I have ever attempted to create a service.
View 2 RepliesI have created a windows service in vb.net. Is there anyway i can create an installation for it that does not require installutil to be used?
View 3 RepliesI was reading how to install a windows service by using InstallUtil but is there a way to install it within the form and not use the visual studio console?
View 2 RepliesI new to .net My project involves developing a windows service application using VB .NET. I have installed the service successfuly on the first attempt using the installutil provided by the frame work.When i uninstalled the application the it gave me the following result.
System.ComponentModel.Win32Exception: The specified service does not exist as an installed serviceAn exception occurred while uninstalling. This exception will be ignored and the uninstall will continue. However, the application might not be fully uninstalled after the uninstall is complete.
The uninstall has completed.
When i tried to install the app again it gave me the following error
An exception occurred during the Install phase.System.ComponentModel.Win32Exception: The specified service already exists
I removed the application from the list of application event log entries in the registry(HKEYLOCAL_MACHINESYSTEMCurrentControlSetServicesEventLogApplication) ant tried installing the app agin it installed successfully. Why is uninstalling the service not removing the entry from the registry.
I am getting an error: OleDbCommand.Prepare method requires all parameters to have an explicitly set type.
on the last line of the code below.I have seen things saying you have to set the datatype of each parameter but how can i do that when it being generated by the command builder?
[Code]...
I've coded a WCF service that is external to the solution I wish to use it in. I'm doing this so that I can have one service that's reusable across many solutions. We've already duplicated this service many times as an asmx integral to the solution and it's not a good maintenance scenario. I'm finally able to have time to tackle gettign this working the right way.My solution (and the service) is in VS2010, Framework 4.0, vb.net.When using the webHttp..Binding binding in the endpoint, when I add the service to my solution the reference is getting added, but web.config does not get added with the system.serviceModel configuration group that is needed.[code]
View 1 Repliescurrently have a VB.Net application using.NET frameworks 2 written in VS 2005 for management of Contacts & Address. What I Want is that user should enter all the details and Information in English & should get the Labels prepared in Hindi Language automatically1)
View 1 Repliesi have prepared a visual basic project which is completely ready. I need to deliver it to the client in the form of an exe. , since this is my first project i do not have any idea how to prepare a standard exe.if i started to publish it says signers certificate not valid. how to rectify this problem.Im using Visual studio 2008.
View 1 RepliesHow can we prepare a rota application which changes the shift so that all the employees get to work in different shifts and in the month end the number of shifts done by all the employees should be the same..
View 1 RepliesI would like to prepare all nodes for my treeview in backgroundworker process. This seems to be fine, but adding those to my treeview1 on backgroundworker completed event seems to be wrong (I get exception there).
the code:
Code:
Imports System.ComponentModel
Public Class Form1
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As DoWorkEventArgs) Handles BackgroundWorker1.DoWork
[code]....
I am working on a GUI for a simulation program. The simulation program is a single .exe which is driven by an input file (File.inp placed in the same directory). The Original.inp file functions as a template from which the form reads all the values into an array. Then it changes these values reflecting the changes done by the user in the form. After that it writes all the new values to File.inp. By pushing the "Run" button the Simulation.exe file is executed. The folder structure looks like this:
[Code]..
Ideally I would supply only the GUI, the user would select the working directory and then the GUI.exe would create an input folder and extract the Original.inp and Simulation.exe in the appropriate locations. So far I have only managed to include Original.inp and Simulation.exe as "EmbeddedResources" in my VB project and I have let my code create an input folder in the working directory chosen by the user.
how I can extract the .inp and .exe file into the correct directories? I've searched on google, tried File.WriteAllBytes and Filestream.WriteByte but did not get the desired results. The problem with File.WriteAllBytes was that I could not point to the embedded resource ("Simulation.exe is not a member of Resources" and with Filestream.WriteByte I got a 0 kb file.
My motive to prepre a application which can calculate free time of the team which handle. I have written a code which updates the username and current time in an access database. How can i run the code on windows lock event.
View 7 RepliesI have a flow document table with text in it. The text some timess just on one line , often on many lines, that means it could include a return and a tab spacing (all in the same cell).I want to put the data from the table to the clipboard in such a way that i
View 7 RepliesCan any one advise me about a book to purchase to prepare for the MCTS:Microsoft Net Framwork 3.5 windows Forms Application exam?
View 5 Repliesi have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
I have a VB2008 application which can control a windows service i.e. start, stop, pause etc. This runs ok on a Windows XP machine but not on a Win 7 machine (message is - Service error cannot open <service name> service on computer '.') ( if I stop the UAC then it runs ok ). It seems to be a rights issue,
View 3 RepliesTill yesterday I was working fine with my Project.I din install anything new, am not trying to open my solution file with a different version also.Today when i tried opening my solution, it was saying
"The Selected Fiel is not a valid solution file"
"The Operation could not be completed.Unspecified Error"
Microsoft Visual Studio Solution File, Format Version 10.00
# Visual Studio 2008
Project("{54435603-DBB4-11D2-8724-00A0C9A8B90C}") = "??E", "..Setup2Setup2.vdproj", "{600F8FB2-B9A9-4138-B7E7-FE7B39815CC1}"
EndProject[code].....
when I search for a customer, it can search but the problem is that when I search for customer and I wanted to update or delete, It has an error which says "OleDbCommand.Prepare method requires all parameters to have an explicitly set type." What does that mean? Here is the code that I am using:
Public Class EditingCust
Dim cmd As OleDbCommand
Dim myAdapter As New OleDbDataAdapter[code].....
Error referencing vs2005 c#file(.tlb extension) inb6 application.rror message:Can't create activeX object
View 2 RepliesI am running on XP SP2 on my Intel C2D, and have VS 2005 on .Net 2.0 Now, can i install the new VS2008 and still have my vs2005?Can I have the both installed and still statisfy the following ?Can I have VS2005 and VS2008 on the same machineCan I do projects for Dot net 2.0on VS2005 while have VS2008 Can I have both .Net 2.0 and .Net 3.0 withouth any problem?Can I still work on my old project in native VS2005 ? Can I work on old .Net 2.0 project in the new VS2008 ?Can I Migrate some of my projects to VS2008 ? Can we also migrate .net 3.0 projects back to .Net 2.0 to work on VS 2005 ?
View 7 RepliesI live in the UK and I want to buy the standard edition cheaply. I've seen an OEM version on eBay which the seller claims to be the full version. But it's only one a single disk and it states "Disk 1" so presumably it isn't the complete application.
View 12 RepliesWhere I can download a copy of VS2005? I need it for school and 2005 is no longer available on Microsoft's website.
View 6 Repliesif i add a picturebox in design then add an image who is triangle formed and make background transparent in setting on the picturebox how do i then make an click event on the picturebox.image? iwant nothing happen if i click on the picturebox background only the image!
View 4 RepliesI have set references to Excel in my VS2005 .net project but the XIRR function is not available in the worksheetfunctions. In Excel it is necessary to add the Analysis Toolpak to the Add-ins. Do you have to do a similar thing in VB.net?
View 1 Repliesnot able to run vs2005 in windows 7
View 1 RepliesI do have a Windos XP laptop with Visual studio 2005 and I just bought Visual Studio 2008 Professional version.Can I have them together in one windows XP laptop?
View 2 RepliesI have a menu where I click on a cmd button to call stand-alone diagnostic pplications.The first two applications that I have, I put in their own folders, and have no problem calling and running those apps. The one I recently installed, is in its own folder also, but when I click on the button to call the app, it starts, then comes up with an "Cannot find file" error
Private Sub cmdHardwareInfo_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdHardwareInfo.Click
Me.Hide()
[code].....
For one of my first projects I wrote a sophisticated toolar. Now the icon adder does not see all the programs that are in the directory.Here's some of the code:
Private Sub CbAddFile_Click(ByVal sender
As Object,
ByVal e As System.EventArgs)
Handles CbAddFile.Click
[Code]...
I am running Windows 7 eval. copy and have been for months. It's great. I saw that the Beta on Visual Studios 2010 and decided to make the jump from Visual Studios 6. I watched all the MS videos on upgrading from VBP to Net and downloaded all of the upgrade programs and advisors. The programs I need to migrate require only minor changes. The video shows Visual Studios 2005 upgrading a VB6 Project because the upgrade wizard intercepts the open and upgrades the file. There are several problems:
1. It appears the VS2010 and VB2010 do not have this capability
2. Running Windows 7, VS2005 and the Associated framework will not load correctly
3.VB2005 does not load correctly
4.The upgrade msi will not load because the specified framework version is not loaded. Apparently it does not recognize Framework 4.
5. So I cannot migrate my VB6 programs to NET using VS/VB 2010. My only solution is to build up another system with XP and do the migration on that system.
So my basic question is do I have to build another system or is there something I am missing about VS2010? Does it have the capability to migrate VB6 programs like VS2005?
I'm currently using VS2008 and 2010 for various projects but now I need to test something with VB2005.Anyone know a link where I can get VB or VS2005 Express edition - It's free software but just can't find it on MS's site anymore and all the ones I find elsewhere on the web are full of malware.
View 15 Replies