I need a hint or sample source code is much better for my project. Here is the idea, I am creating a simple program that can record a video using a webcam as a surveillance camera. I need to record it continuous and every hour the capturde video will store/save to my drive. I am not that good in webcam/camera manipulation in vb.net.
View 1 RepliesI have been working on capturing image and recording video in VB using webcam. From the cource code,I have successfully captured and saved images, however for the video part I have failed to save it in any selected directory. I've checked the code with some other sample codes in internet. Couldn't see any problem or differences. My code for recording and saving are as follow:
Recording:
SendMessage(hWnd, WM_CAP_SEQUENCE, 0, 0)
Saving:
Dim save As Integer
save = MsgBox("Do you want to save your recording video", MsgBoxStyle.YesNo + MsgBoxStyle.Information, "Recording Video")
If (save = MsgBoxResult.Yes) Then
[code]....
currently, im using a webcam in my thesis. one of my objective is to have a realtime camera that can record/capture a video at the same time can capture image. i dont know how to code it in vb.net.
View 1 RepliesWebcam capture code are below:
Dim capturesource As New CaptureSource
' Get the default video capture device
Dim _videoCaptureDevice As VideoCaptureDevice =
[code].....
I am using webcam and want to record video and save it on disk, the video time must be constant for such 20 or 30 sec, what i want is to change CAPTUREPARMS members which contain fLimitEnabled & wTimeLimit
'---capcaptureget function
Function capCaptureGetSetup(ByVal hWnd As Integer, ByVal s As Long, ByVal wSize As Integer)
capCaptureGetSetup = SendMessage(hWnd, WM_CAP_SET_SEQUENCE_SETUP, wSize, s)
End Function
[Code]...
I have managed to record my webcam which saves to the desired location and is displaying to the screen while recording but i am trying to run other functions while the webcam video is being recorded but the rest of my form stops functioning until the recording is completed.
Is it possible to record and continue other functions at the same time
I creat audio video chat and when calling receivng video and client video is together...I want that client move his or her webcam video where want...as I know it name DROP&DRAP but I`m not know how to do it...
View 5 RepliesHow can i record a video via webcam in visual basic application and then display the video on user's request either live or recorded video.
how to develop video webcam recording application.
I'm currently working on a project which is basically Server-Client based. Client is standalone VB executable file and Server is web based.The program is supposed to use webcam as video capture device, stream video footages to server (on website - live feed) and allows users to manually save captured videos into their computer.Thats basically the brief description of my system. I'm starting off working with VB right now and website after I'm done with VB.I'm new to VB, this would be my 1st project on it. I've looked for available sources online and found several VB apps which lets me capture image file through my webcam. Also on MSDN forum, i found recommendations on using "DCAM Server" to stream videos on website but I'm still not sure of how to configure the settings to make it work properly, and of course, don't have a proper website for it to work with yet atm. Also realise I'll need to integrate some .dll files or activeX functions to use video capture function. I don't really know how to use these yet rite now.
View 3 RepliesI have a little Logitech USB Webcam that I have attached to a laptop and I want to be able to view a video stream from it. I already gathered it will need to be a client/server model...and I probably need to use TCP/IP and/or Winsock (if its still even used)...
how to really approach this application as far as the video capture process? I don't have a need to really record video in any way so if i can just "preview" the video thats fine, although recording would be a neat bonus.
I read into the Windows Image Aquisition libraries and they seemed to be the right thing...but I wasn't so sure about the cross-network half of the equation.
I'm using a picturebox to display the video captured from my webcam. I tried out two codes:
1) [URL]
The code in this forum by kaymaf. it does not work at all! there is no video displayed at all. Also, i'm currently using a PixeLINK 1394 Camera to get the video, but this is not shown in the list of cameras. It shows : Microsoft WDM image Capture (Win 32). Are these the same?
2) [URL]
This code works the first time i run it. But the second time it gives me a listbox of camera to choose from and then does not display any video. The screenshot is as displayed:
I am interested in streaming video from a webcam on one PC to another PC. Could this be done without streaming to a server. Could this be achieved by streaming using P2P?
View 4 RepliesI'm currently working on a project which is basically Server-Client based.Client is standalone VB executable file and Server is web based.The program is supposed to use webcam as video capture device, stream video footages to server (on website - live feed) and allows users to manually save captured videos into their computer.Thats basically the brief description of my system. I'm starting off working with VB right now and website after I'm done with VB.
I'm new to VB, this would be my 1st project on it. I need help and guidance on how to start please, especially on video capturing functions.I've looked for available sources online and found several VB apps which lets me capture image file through my webcam. Also on MSDN forum, i found recommendations on using "DCAM Server" to stream videos on website but I'm still not sure of how to configure the settings to make it work properly, and of course, don't have a proper website for it to work with yet atm.Also realise I'll need to integrate some .dll files or activeX functions to use video capture function. I don't really know how to use these yet rite now.
I come across this web site that explains how to get a video from a webcam.
[URL]
all works fine apart it does not save the file?
I have problem in recording video from webcam the video file not always appear in its specific path in the running time in addition there is so much delay to appear. 5 sec is the time of the video duration, I want to save the video when it start to load but in the same time it save the video show the video in the background which I have problem in this point too.
[Code]...
I am building an application in vb 2010 that uses wmp ocx to play videos from remote streaming servers. Is there a way to record or save that video simultaniously? Which technique should I use? I have searched a lot on this but unable to find solution yet. Do i need to use Directshow library?
View 1 RepliesI have a program that reads and displays a file as an annimation and I want the user to be able to turn it into and AVI (or other video format). I certainly know there are Screen Capture programs that will captured the video from the screen, but I
have seen an app that creates the video in the background. The user selects the file, and without sending anything to the screen it creates the video.
how this done or where to start? Or if there is an addon app that will do this?
Code to Record video from video devices in wmv format using Vb.net
View 2 RepliesIs it possible to write code to record the pc screen and output a video file of it?
View 3 RepliesI have a logitech webcam that I use to take pictures of customers to submit to a server/database. Utilizing AVICAP32.DLL calls, I was able to modify my VB.NET program to take these pictures via a button in my program.
My question is, it would me more convenient to my intended users to click the webcam button, instead of clicking on the button in my program.
Is this possible to do in VB.NET? and how can I do this?
If this is not possible to do with my logitech webcam than is there a Microsoft Webcam that can do this?
I have a vb.net project which i have inserted pictures and video. I inserted a video clip using the Windows Media Player control and it does work. The issue i have is that i can't move the program to another computer because the pathname for the video will be wrong. I know i could change the pathname when i move it but this is not practical because i need to present this program. Does anybody know how to make the video accessible no matter what location the program is at?
View 6 RepliesI am monitoring 12 video feeds from video cameras. Now I have more than 12 cameras, I have 134. But I will only monitor 12 cameras at a time. By Monitoring I mean, I have 12 small video screens on the form that I can see the video. The way I know which cameras are active, so I can monitor them is by a boolean value in a sql database. I run a Store Procedure in my program, and spit out the results in a XML file. I then read the XML file in a loop. This XML file will have a list of the camera names I need to monitor.
So that is for 12 video feeds. Now, I want to have a NEXT or FORWARD button on my monitor form. So when I click this it will give me the next group of cameras, 13 to 24. Now if I only have15 cameras that are active, that means the first group is 1 to 12, then the second group is 13 to 15 cameras. So I will only have 3 to monitor on the second grouping. One thought I had was to have another field in my table to mark as already as an active monitor, so when I run the SP, i will not select that row. But I need to select 12 at a time. Or I can make a number of xml files, one xml file for each grouping of 12, but I need to figure out how I can select the next group without re-selecting the first group. I have no code at the moment, I'm on my non-programming computer.
I was wondering if it was possible to have a program open Firefox, and have it open a bunch of tabs that all go to a link with a video, and then have it automatically play that video?
View 4 RepliesI would like to create thumbnails into a VB (2005 or 2010) form from video files.
I have a directory (in my hard drive) with video files (.mpg).
How to show video thumbnails for each video file?
My VB code (for images) is attached below and I want to convert it in order to manage video files.
Private Sub ThumbButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles ThumbButton.Click
Dim imagepath As String
[Code].....
i want to make a video streaming server or a Video Lan chat programe in VB.net
View 1 Repliesi want to buffer a video file on client side when it request.. what syantax i use to buffer the video the video in client's media player
View 1 Repliesis it possible to use avicap32 to capture video with a web cam and save the video as a wmv format instead of avi one
View 1 RepliesI hav a web service which pull records from a database and I am hosting these services in IIS which works fine but I am trying to retrieve the record and display the record in a listbox displaying the time field as the text for that record.I have created the following function
public sub get_data()
dim dt as new data.dataTable
dim service as ws webservice.webservice
[code]...
I am trying to check a record in database before inerting a new record here is my code but problem is when i enter a names first alphabet it imediatly populate massage. i want to check it after entering whole name
Private Sub TextBox1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
Try
Dim cnString As String = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" &
[CODE]...
can play a SWF video but not a Flash Video?
View 14 Replies