on my form I got two datagridviews.When I scroll one of them to left/right the other grid should get the same scrolling position.I found "Verticals crollingoffset" but this is readonly.How do I set vertical scrolling position from one grid to the other? One has scrollbars visible, the other not (it is used as a filter with one empty row)
View 1 Replieshow to do vertical scrolling in tree view?
View 7 RepliesI have a text box with the names of student and another text box with their grades side by side in the same order..
I want to synchronize the Vertical scrollbar of both the text box to a single scroll bar such that when i move it the contents in both the textbox moves simultaneously.
I want the code to synchronize both the textbox with a single scroll bar...
When a panel's AutoScroll is set True then it will add scrollbars for navigation of the entire size of its content. What I want is to be able to set the vertical scrollbar to go to top or zero so its contents top controls will be viewable.
View 9 RepliesI have a TextBox control with a lot of text which has a vertical scrollbar, and every time I hide/show the control the position of the scrollbar stays the same. I'm trying to figure out how to change the position of the scrollbar to the top of the textbox, as if it were at the beginning of the text.
View 1 RepliesI have a windows form which contains a group of panels in a flowlayout control. Each panel has a button acrossthe top which is always visible and clicking on it expands the panel to view the other controls on it. clicking on it again shrinks the panel back to the size of the button. A simple form of menu. The flowlayout control has autoscroll enabled and as enough panels are resized (opened) they obviously are too big for the form and a scroll bar pops up.To get the most recently opened panel in the viewable area I use
FlowLayout.ScrollControlIntoView(pnECBF)
where pnECBF is the panel just resized. This works but places the panel at the bottom of the form i.e just in the visible area. I want the user to be able to see the panel AND the next menu button which is on the subsequent panel. So basically what I want is the panel into the visible area +25 pixels for the next panels menu button.
I have a RichTextBox and I need to find the position of the vertical scroll bar.
Is there any way to do this without Pinvoke? If not, what is a way to do this WITH Pinvoke?
I need to return an integer value.
I'm trying to draw a grid using vertical and horizontal lines.Both For..To statements work fine when one of them is commented out otherwise, they won't work together. At run, only the first For..To statement is executed.[code]
View 6 RepliesI have a fixed-size pane for displaying MSFlexGrid rows, and, when the number of rows exceeds the pane capacity, a vertical scroll bar is displayed. If the user scolls downward, and selects a lower row for action, I want the display to be restored (approximately) after the grid is reloaded.row selection is maintained explicitly by code: If the action is a change in row data, the successor row will be selected (by code); if the action is row deletion, the preceeding row will be selected (by code). Since the grid must be reloaded following the change, MSFlexGrid will present the first n rows by default. (The grid must be reloaded because the actions may have affected the presentation order.)How can I force a scrolling repositioning after a grid reload? In my imagination I see a sequence somewhat like make-non-visible, reload-grid, set-scroll-position, make-visible, set-new-row-selection. Is something like this easily done?
View 3 RepliesI generate a DataGridView using the result of a query. The query generates a LOT of columns (more than 75). Obviously the DataGridView does not show all of them. I wrote a small procedure that extracts data from the DataGridView and generates an Excel file ora .csv file.
[Code]...
So with the stock Textbox, I set the Scrollbars property to Vertical. This is great if the text in my box never changes; I can scroll up and down while the box sits still. If I'm running a background operation that logs output to the box though, the scrollbar resets itself to the top every time I append text to the box.
I know I can set the Textbox.Selection property (or use the Select method) to reposition the carat in the textbox, make note of that position in a variable, then append text, reset the carat, and use the ScrollToCarat method to reposition the scrollbar where it belongs. That's a really (ridiculously) long way around. Anybody know if there's another/better way of holding the scrollbar position, short of actually building a custom control (or using a Textbox and a separate Scrollbar)? It never hurts to try. In a worst case scenario, you'll learn from it.
VS 2005 - WinForms - VB - DataGridView Is there a way to have the New Record position to be at the top of the grid? I could do this using Janus Grid?
View 5 RepliesHow would I leave the vertical scroll position as it is and set the horizontal scroll position all the way left if it isn't already in that position? I've been using Me.AutoScrollPosition and have come up with code that is satisfactory but I haven't been able to always leave the vertical scroll position exactly as it is and just move the horizontal scroll position to the left limit.
View 4 RepliesI wanted to create a module / tool similar to MS word where user should be able to add controls, resize controls, drag and drop controls.Anyway, I have got lot of references on how to resize control, drag and drop add control etc...my main requirement is i need a way to add grid and should be able to add cells to it. When i resize the grid control, the cell height & width should get extended and compressed accordingly. Also i need to save position of the controls to a text file.Saving positon of other controls is easy but most importantly i need to save each cell position of the grid.
View 2 RepliesAfter scouring the articles online I have come up with this design for a winforms based touchscreen app that needs smartphone like scrolling. The app itself will run on a tablet laptop or touchscreen desktop.I put everything I want to scroll on a panel. Set autoscroll to true (which will show scrollbars)Now put this whole panel inside a groupbox.Shrink the groupbox until the scrollbars are hidden (visually hidden, not visible = false)
Now the fun part I am stuck at.I think I have to handle the mousedown, mouseup & mousemove on the panel to set the autoscrollposition so that when someone touches the panel and drags, it does it's scroll magic. Please help fill in the few lines of code in below method stubs. The msdn doc on autoscrollposition is very confusing since it returns negative numbers but needs to be set to positive with abs and what not.
Point mouseDownPoint;
Point mouseUpPoint;
Point mouseDragPoint;[code]......
I currently have a label scrolling text, But for some reason it only displays Certain song titles/text. Does Anyone know why?!
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
OpenFileDialog1.ShowDialog()
AxWindowsMediaPlayer1.URL = OpenFileDialog1.FileName
[code]....
winforms .net 3.5 Ultrawingrid 9.2 In my subclass of Ultrawingrid.Ultragrid :
[Code]...
This works fine. But when the grid is dropped on a TabControl tabpage, the ctrl-tab looks very different to the sub above. e.keycode is seen as controlkey {17} I realize that by default cntrl-Tab moves between tabpages. I need to override this behavior. My thought is I probably need a subclass of the tabControl which will pass the keycombo through just as the form does but I confess to being clueless as to how to accomplish that. I tried to override the onkeydown of a tabcontrol subclass and just issuing a return and not and base call to onkeydown if the ctrl-tab combo was pressed but it seemed to see the e.keycode as controlkey as well.
[Code]...
I have looking for a tutorial or class that demonstrates more than a trivial example of saving a windows position on closing. The ones I have found don't seem to work on all systems because of:
1. Multiple monitors. (and resolution between those monitors)
2. Toolbar size and position (toolbar is only on the primary monitor, well sometimes)
3. Sometimes the programs dont open on the right monitor they were closed on.
Is there an extensive class or tutorial on all the stuff a programmer needs to get right to have a window size and position persisted between executions?
I am using the following code to populate data in Textbox1:
[Code]...
I have few functions assigned in TextBox1_TextChanged event. The problem i am facing is this event is fired twice, once after the Fill command and another after the Position command whereas i want the event to fire only once after the Position command. What should i do?
i'm using the MVCContrib grid trying to override the start of a row and the end of a row. It's not working as advertised. This is an extract from my MVC2.0 view.
<div id="chargestable">
<br />
<% With Html.Grid(Model.InvoiceListingInformation)
.Columns(Function(column)
[code]....
The stuff i put in the begin row and end row functions is being rendered above the grid entirely.(PS i can't just use the attributes as i need to wrap the row in another html element)
i have a prob that i have a gridview on the parent window. when i open a child window using showmodaldialog, i enter some data in the textboxes. now when i close my child window i want to display the text entered by me in the grid. i want to know how can i access the grid in child window
View 1 RepliesTrying to understand the basics of grid design so how would I make a over sized grid or a grid larger then whats viewable on my screen resolution? Below is a simple chart describeing what i want to make roughly. I would like to build the grid in "blocks".[URL]..
View 16 RepliesThe below code was written to bind the datatable to the grid, but i am unable to fill the grid.I am unable to fill the datagrid. [code]
View 1 RepliesI have UltraGrid and i need when i click on grid row to get content from specific column of that grid. For example if I click in cell of fourth column then i need to get value of first column of the same row where i clicked.
View 1 RepliesThis is a VB .NET application where we are showing the output of a SQL statement in a Datagrid view. using .NET 2005.We need to get the seperators of the headers on the grid control to be the same colors as the GridColor on the form. See the picture below:We've tried looking through all of the properties of the DataGridView control, and found some interesting things that looked promising such as the DataGridViewAdvancedHeaderStyle, and DataGridViewHeaderBorderStyle, but none of it seems to allow you to change the colors on it.Does anyone know how to do this without remaking the entire thing with a GDI+ control?
View 2 Repliesneed to have a summation field in each row of a grid in visual basic. Each row needs to calculate the remaining quantity of its row and all other rows beneath it. Thus the subtotal field in the 1st row would equal the sum of the shown quantity field for the entire grid.The next row would include its value and all those beneath it. Its subtotal value would be less than the subtotal of the row above it (by the quantity value of the 1st row). My code for the grid is very simple I just can't figure out how to add this iteration.
View 3 RepliesI have an Idea but im not sure how to get started... Its a map maker... There will be a panel on the side for items and it will draw a grid and you can make a map using the items on the grid.
View 5 RepliesAs I understood , The property grid is given an object which it can manipulate by extracting its Properties using reflections.
My problem is that I have a set of Parameters that is determined during run-time , thus I can't staticly compose a class with properties to represent this set.
I have two idea in mind to solve this problem but both are complex and will probably consume lot of time , infact i will say they are not practical under my time constraints. One is to use Reflection Emit in order to define a class dynamically and the other is to dynamiclly build a C# source file and then compile it using CodeDom.
Can Property grid behave in a different manner( other then extracting the Properties of an object using reflections ) that can suite my problem?
I want to say that the reason I went to the property grid from the begining was its ability to provide realy nice Data Retrieval UI for common types.For color you autometically get a palette , For dataTime you automatically have a nice calender. I would like to get those things automatically If possible.
Visual Basic 2005 I have a DataGridView on a form. It's bound to a DataSet, and I'm working by way through the dataset doing various things to the records based on the "status". What I would like to do is scroll the grid, so that the row that the program is 'looking at' is in the middle of the grid.
View 1 RepliesI have the below code that i am trying to have two datagrids with a grid splityter in the middle. The split seems to be working fine but the issue i am having is when I populate the datagrid it is growing in height and changing the splitter instead of leaving the height alone and adding scroll bars.
What simple thing am I overlooking?
<Grid x:Name="gdHistory" Grid.Column="0" Grid.Row="2" >
<Grid.RowDefinitions>
[code].....