I had a form with four panels all have the same size and location I switch between them using .BringToFront
what I need is a transforming animation between them , can I do this with vb.net 2010
another explain I want somthing like fade effect when I change the visibility of a panel and show the other one and if I cant do this with panel control or vb.net windows forms ,
I'm trying to make custom ListBox with some graphics. Base is ItemCollection - each item contains Panel, 2x label and 2x picturebox. What each panel have to do:
- Change backcolor on MouseEnter and set color back when MouseLeave occurs.
- On MouseDown(LMB) - Panel stays "selected" - different color.
Problem: I can't access multiple panels at a time(and I need to), just one via sender as in function. Of course, I can do it hacky way, but I want to do it effective and regular. Is ItemCollection the right solution or should I do it just like an array of panels? Also I want them in one "box", ItemCollection is good for it.
Second "problem": I need to make labels "merged" in panels, when i MouseEnter them(labels), background color on that panel sets to my default color. when i MouseClick them(labels), nothing happens (need to "select" parent panel). It can be again fixed with hacky way, just disable labels - but then the colors of labels are unchangeable.
Am currently developing web based applications using VS2005, i want to shift to VS2008, what are the things that i do have to take into consideration.
View 1 RepliesMy objects contain curves and texts. I draw the objects with something like this[cod]e...
View 7 RepliesI've a small home network and i want to make a program that's transforming files between two computer and make me chat with all computers.
View 1 RepliesThere are two panels A and B in a form horizontally, same size. Panel A archors with top,bottom, left and Panel B with top, bottom, right.When the form changed, the gap did.Panel A archors with top,bottom, left and Panel B with top, bottom, right and left.When the form changed, the gap doesn't, but only Panel B came bigger, Panel A didn't.Have you a way to keep the gap and the two panels can change in same time when the form changed?Must calculate the size of panels within Form's SizeChanged Event?
View 7 RepliesI have a form which has two panels each containing there own controls (Pnl1, Pnl2). By Default I want Pnl1 to show and Pnl2 to be hidden which I have set but I want Pnl2 to sit ontop of Pnl1 so when Pnl2 is selected Pnl2 is Visiable and Pnl1 is hidden. Therefore Pnl2 and the controls sit in the same place as the controls in Pnl1. I have got everything lined up but as I move Pnl2 over Pnl1 to sit ontop, Pnl2 is moved into Pnl1 and becomes a Panel within the Controls of Pnl1. Therefore when I hide Pnl1 everything is hidden as Pnl2 is part of Pnl1.
View 1 RepliesI am working with tab controls (tab1, tab2, etc) I want to more than one panel in tab1 and switch between them using a button. My problem is working with more than one panel in tab1. This is an educational program i am working on for schools in the Dominican Republic.
View 1 Repliesi want to make a Application Who Show Panel One By One or Visible =true one By one Like Panel1.visible=true & allpanels.visible=falsei m using 100 Panels how to make possible like this [URL]..
View 7 RepliesI like to use pop out panels that would just slide but sometimes it looks bad. is there a way i can fix it to make is as smooth as possible?
Here is the code i use:
dim pp as new point
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
pp = Panel1.Size
End Sub
[CODE]...
How to randomize the panels?
and if the panel reached about 5 randomizing, it will stop randomize..
I am adding controls to form at run time.I am doing the following with no problem:
[Code]...
Is there a way to hide all panels on a form?
View 2 RepliesI am trying to stack panels on top of each other, but they keep becoming children of the one I put them on top of. I am stacking three panels. I want to show each based on certain criteria. The showing and hiding works if they are not directly on top of each other. However, I would like to have them on top of each other. They are all exactly the same size and same position
View 2 RepliesIm working to develop an application thats going to run on some not-so-good as performance PC's. The application is done in VB.NET and i encountered some obstacles during my work.
The idea of the application is to allow the users to slide through some pages when they click with the mouse and drag (while the left click is pressed) to right (for browsing to the previous page) and to left (for browsing to the next page). Every page contains 4/6/9 panels with 4/6/9 pictureboxes with some gifs as images.
The issue is that when the user drag with the mouse to browse to a page, the panels and the pictureboxes jerks around when they are moved.
Here is the code that handles the slide part
If i + speed < 1024 Then
For j As Integer = 0 To nrOfGamesInTotal - 1
totemGame.gamePanel(j).Left = totemGame.gamePanel(j).Left + direction * speed
[Code].....
I'm having a bit of trouble creating draggable panels that will stay on top of all the other panels and not 'hide' behind them. My code for dragging works fine, I just need to set the layer of a panel to the top of all the different controls
View 1 RepliesI want to make a form with two panels. I one panel have eight circles that represent leds.And have a but to start turning on the firdt, then turn it off and turn on te second one, and so on.
View 1 RepliesTo save from using several different forms in programs. I'd like to make just a few panels to represent each one. Then when I need to display one I just set it to visible or not visible.
For example, a quiz program. The 1st 10 questions are on one panel, the 2nd 10 are on a 2nd panel. They are both identical except different questions.
The problem is, when I try to put them both on the form, they have to be in different areas or else one will go inside the other. How can I keep several panels on one form without them going inside each other, in other words how can I keep them separate?
I have here another question. I have a panel with about 20 different panels inside of it. There is a "mouse move" event for panel 1, How could I make is so if the mouse is over 1 of the 20 different panels, Have it display the panel name? I would paste source but that's why I'm posting here.
View 1 RepliesI am looking to make an application where panels might seem to be very heavily used. Is it recommended not to use them for large item management?For instance, I want to have a menu with flat style button. When clicked on, they will hide all other menu panels and show the options for that buttons clicked. From there, for each option clicked, it will display a panel on the right with various results for the specific criteria selected.
View 5 RepliesI have an application in which the windows form has 3 panels. Under some circumstances, controlled by the User I want all three panels visible, in other situations I want one of the panels not visible.
The program works if I use the code:
Panel1.Visible = False
Panel2.Visible = True
The program also works if I use the code:
Panel1.Hide
Panel2.Show
Is there some advantage or disadvantage to either of the two approaches?
I am looking to release an ad-supported free app (i want to make it free, but need to cover some costs) in which the ads are basically unobtrusive panels in the corner of the screen. They are webbrowsers which show an image.[code]...
View 6 RepliesI am new at this. Im trying to serialize a panel and its contents in vb. The controls are added at runtime. I have tried adding to a arraylist but it didnt work
View 2 Replieshow to show a panel on top of other panels ?
That means , when a panel(panel1) is in top of another panel(panel2) , when i click the background panel(panel2) will be shown in top of the panel that was in top(panel1)...
I am using vb 2010 and I have a question about anchor. I have two panels side by side, I anchored them both: top, left, right. But when I resize it the left panel goes behind the right panel. Isn't there a way so that when I resize, both panels grow parallel?
View 14 Repliesi have 2 panels , one next to other and one picture , when i have the mouse in front of the picture i hover another panel to show , it has a lil bigger width than the panel 1 and that doesnt allow it to show fully.
View 16 RepliesI have a program that will use a lot of panels. The panels will all be on top of each other. Then if you clicked an option on one of the panels it would cause another panel to come up and so on. This is a game so it's not like the panels come up in a set order each time. Depending on what the use selects a different panel could come up in a different order.
z-order or hiding Z-order is supposedly a nicer way to do it instead of hiding so i was going to try that, but sometimes when a panel comes up it has info from another panel on it or the panel doesn't show at all and other things like that.Is there a way i could send all panels to back and bring only the panel i want to front other than doing something like..
VB.NET
Panel1.BringToFront()
Panel2.SendToBack()
Panel3.SendToBack()
[code]....
Since doing that every single time would take so much time depending on the number of panels there is.
I've been kinda stuck on a problem where I have to make Conway's game of life, simply stated I need to check all panels directly around* another panel is there a way to do this easily, other than using a billion if's in the program. Tab index? I could switch to button's if I wanted to but at that same time I find panels to be simpler for stuff like this unless anyone has a different opinion.
View 13 Repliesis it possible to collapse both split container panels? the idea is that by collapsing both panels of one container, my textbox which is outwith the split containers can give the impression of being "maximised" in the form.
View 2 RepliesI wrote an application using VB.Net 2008 (Not express edition) and in my main form I have several of it panecontrols and on these panels I have lots of other panels that contain controls.My problem is when I switch between the main (split panels) the controls are flicks(flashes) like they draw themselves for a second or two and after that the form is displayed as it should be
View 10 Replies