I have a program which uses web browser control to automize some testing. it works fine on local machine. however, when I deploy it on windows server 2003, for some reasons, the program can not click any buttons automatically in the IE browser control.
I checked, the IE on windows 2003, because of security, the internet is set in the highest security zone, all others, i.e. activex, scripting, ... are enabled.
I have code that works fine on my XP machine. It loads an HTML document into the VB 6 WebBrowser control and then uses the following command to print the document without any print dialog box:mfrmPrint.WebBrowser1.ExecWB OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, PRINT_DONTBOTHERUSER_WAITFORCOMPLETIONI have also just implemented a .NET C# DLL that uses the axDHTMLEDLib. It also works fine on my XP computer.
View 4 RepliesI'm using a webbrowser control to pull some information from a website. It works fine.I load the web page when the user clicks a button and then I pull the information from the site when the page completely loads. I have this bit of code in the DocumentComplete event.I am doing this for two different websites. So, my code as it is, looks something likes this:
vb.net
Private Sub btnStart_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnStart.Click
WebBrowser1.Navigate("http://www.website.com")
End If[code].....
If I add a second Navigate to the same WebBrowser control, and then add another Document. GetElementById line, using different variables, it doesn't work.Its obvious that it loads both sites and then it finishes. So, it never has time to finish the first load and then pull the info into the text box.Is there a way to do this? To load the first site, pull the info, load the second site, then pull the info from there?
I have a Web Browser Control on a User Control that I load into IE problem is doesn't matter what I do, IE says that I cannot access a disposed control.I read the others have had similar problems with various controls, but here is no real answer out there regarding a Web Broswer control. The problem is on line 34. It happens if yout ry to do anything with the control, not just navigating. Also, the User Control does load in IE fine, however, the Web Browser control is never there no matter what I do.[code]
View 1 Repliesthis is my code
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
TextBox1.Text = ""
TextBox1.Text = WebBrowser1.DocumentText
Call baby()
End Sub
[Code]...
will SQL statements that work in Compact SQL Server also work in the Express Edition of SQL Server?
View 2 RepliesI'd like to integrate Webkit.NET into a VB project, but I'm not having any luck so far. The Webkit.NET tutorial page gives a demonstration in C#, so I assume that it's possible to use this in VB.NET as well? [URL]
I added the control to the project successfully, but since I'm not familiar with C#, I haven't been able to convert the code successfully (even after running the code through a few different online C# to VB.NET converters). So... has anyone gotten Webkit.NET (or any Webkit-based browser) to work in VB.NET? Or am I just dreaming? I would love to be able to use the default .NET WebBrowser control for this project, but this project requires doing a few things that the IE browser is not capable of (but Webkit can do it easily).
I'm having trouble getting this sub to work on Windows 2003. It works on Windows XP and Windows 7. Windows 2003 has "wininet.dll".
change_proxy("123.115.112.222:3128")
*********************************
Public Sub change_proxy(ByRef proxy_port As String)
[Code].....
I have installed an application in MS Server 2003 R2 that I recently completed. Now I'm trying to install an update. It installs but does not recognize it as an update, it Installs the app. as a second App.I Installed the same app. in XP and the update was recognized and the app. was updated.Is there a special way to publish for MS Server 2003 R2.I'm using VB2008 Express in a Vista.
View 2 RepliesI'm wondering if anyone knows how to connect to exchange server via vb.net.
I need to create a program that imports data from a calander in exchange server 2003.
(The idea of the program is to imput sick and holidays into a calander and get the vb.net program to read in all the data and store in a database for future use and reporting etc)
I have developed a application in VB.net and VB 6.0 which uses Windows 2003 SERVER (SBS) Fax Service to Send Fax.This works fine with Administrator Account Privilage use logs into windows but in case when non Admin Privilage account user logs into windows application exception is generated ("Permission Denied").User has full Control on C Root still
OS Windows 2003 Server SBS
Programming Platform : VB.net 2.0 and VB 6.0
Windows Fax Server
Code With create this issue is
Dim objFaxDocument As FAXCOMLib.FaxDoc
Dim objFaxServer As New FAXCOMLib.FaxServer
objFaxServer.Connect ("SERVER") 'This were when non Admin Account User Log Exception in Generated ("Permission Denied")
I have Visual Studio 2008 running from Windows XP. Our server is Windows 2003 Server.
On a different server, there is an Oracle database we want to connect to.
I've made the connection work from my local VS instance using system.data.OracleClient with the following code:
Dim oradb As String = "Data Source=(DESCRIPTION=" _
+ "(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)" _
+ "(HOST=ourHostaHere(CONNECT_DATA=(SERVER=DEDICATED)" _
[Code].....
What do i need to do, to get my local Visual Studio 2008 project to connect to the oracle database?
What do i need to do, to get our server to allow the published .NET page to connect to the oracle database?
.NET Winforms App Under Windows 2003 Server
View 4 Replies.NET Winforms App Under Windows 2003 Server
View 1 Replieswhich file i should install in our windows server 2003 for it to support the windows 2003 server should i download the all framework (200+ mb i think) ?
View 5 RepliesI am NOT allowed to install into Windows Server GAC. I am allowed to upload my program files to a shared drive, not the operating system drive.To begin, I created a simple Class Library .dll and uploaded the entire project folder to the shared drive. I have absolute permission to do anything with this drive and the computer. This class library has only (1) public property.I created a client exe. with a reference to the shared drive .dll. I do not want a local copy of the .dll into my client folder. I want all clients to use this shared copy on my shared drive. And I repeat, I do not want to install into the GAC. I also have full permissions on my terminal.I have created a key file (.snk) for my .dll, and set up assembly information (public id) and tested.I have tried without key(.snk file), and removed assembly information, and tested.Can someone point me into the direction to install/or not to install a MyClass.dll on a shared driveand be able to reference it from other applications?I do not want to use ASP.NET. This is just a base class. This is not a Web service. It seems Windows server 2003 wants this installed into the GAC (C:WindowsAssembly)I have to be missing something.
View 5 RepliesI created a Visual basic DLL in Visual Studio 2008 on my computer( not server). I want to copy this DLL to the server.I want web pages to call this DLL What do I need to install on the server (2003) to make this DLL work? I think I would need
MyClass.DLL
MyClass.pdb
MyClass.tlb
How to Check whether the Exchange Server 2003 is installed on Target computer while making installer?
View 1 RepliesTHis code below retrived Hdd SerialNumber.it works both on windows Xp and windows 7.But does not work on Windows 2003 Server SP2.
[Code]...
BackgroundServer: Windows Server 2003 R2 SP2 Standard x64 (physical server).Executable â.exeâcompiled with Visual Basic 6.0 SP6.The executable is registered on the server with PI.exe /regserveremWe have no idea of what exactly it is that triggers the problem. But after a undefined time/load/operations on the server the registration of the executable is lost or When calling the executable following error message is returned: "Retrieving the COM class factory for component with CLSID {E6A1ECAC-AB5F-4E31-96F5-A0A0CA5EB134} failed due to the following error: 80080005The error is easily fixed with following commands: API.exe /unregserverAPI.exe /regserver
View 2 RepliesI am trying to connect a VB.NET 2003 Oledbdataadapter through the wizard to a SQL Server 2005 Database, but i get an error message during the wizard.These are my steps:New Connection, Select provider (Microsoft OLE DB Provider for SQL Server), Select Connection:server name, log on: use windows NT integrated security, select database. I do all these steps then click "test connection" and it is fine, but when I click "ok" and error message pops up."Unable to connect to database. It is only possible to connect to SQL Server Desktop Engine databases and Microsoft Access Databases with this version of visual studio."
View 3 RepliesI have built an application in VB 2010 on my Windows 7 Pro desktop. I have a particular combo box with a datasource that is dynamically populated, depending on certain values entered by the user; it may or may not have any records in the datasource. When I run/install the application on my desktop, the combo box acts normal, if I click the dropdown button and the datasource contains no records, the combobox will show a single blank beneath the combobox (to indicate no records). When I perform the same action on server 2003, the combobox DOES NOT show a blank row, it does nothing! It act's like it's broken.
View 3 RepliesI've developed a VB.NET application with Visual Studio 2008. The application communicates with SQL Server and processes a text file.
My question is about performance. While I run it from Visual Studio 2008, it takes 3 sec to complete. The same is when I run the executable created by the Setup Wizard on my desktop (Windows XP sp 3). But if I run the executable installed on a Windows 2003 Server, it takes 15 sec to complete! What could be the reason of degrading performance on the server vs. the desktop? The .Net framework 3.5 SP1 is installed both on the desktop and the server.
I'm writing a short app that will send an email notification, rename files and move them to a history folder after a DTS package runs and creates the files. It's a simple setup, the files will be in a folder. I'm attempting to rename them, then move them. For some reason, I keep getting System.IO.IOExceptions when I try to rename the files. Here's my code:
[Code]...
I use webbrowser as File Explorer.
If you click folder it opens new folder contents in WB window but if you click html document it opens in EXTERNAL viewer.
How do you get html document to open in WB while exploring ?
I am writing a few web based apps which will require a webbrowser extension. I have already used the IE webbrowser control that uses the trident web rendering engine. I believe this is MSHTML.DLL? Anyway, some of the users of my programs have complained of a few things. Particularily,
1. It seems to be a slow browser, at least compared to other rendering engines out there (webkit and gecko are 2 known ones).
2. On the developer side, it seems to be low in features. The features are sufficient in most cases, but there are some "special" things that I need.
3. It has VERY low HTML (and especially HTML5) compliance.
My question is, how much work would it take to use a different engine (such as webkit .net, which I HAVE heard of) and be able to distribute it easily. Or, if you guys feel ambitious, we could try writing a brand new engine ourselves. I know how big of a job it is, and frankly, I have no clue where to begin. I would just like your thoughts and opinions on the matter.
i have created an app to load an access database into a datagridview, which contains web urls. When button is clicked it webbrowser1 navigates to each url and each webpages document.inertext is put into textbox. This all work fine but after a while the webbrowser navigation becomes increasingly slower.
For Each RW As DataGridViewRow In Me.DataGridView1.SelectedRows
'''''''''''#######cell values into strings ########''''''''''''''
If RW.Selected = True Then
Dim domain As String
[code]....
I have a project that up until recently has been working fine. It sends an email message to a user once a file has been successfully uploaded, registered and/or approved to use the website. It is written in VB.NET framework 1.1, running ASP.NET on a Windows 2003 server SE sp2.
First the code
Public Sub EmailAfterRegister(ByVal sEmail As String, ByVal sUser As String)
Try
[code]....
This has worked for over one or two years. Today I realized upon testing I get the following error:The procedure entry point IstrcmpiI could not be located in the dynamic link library MSDART.DLL.Upon some research I found that maybe I needed to install MDAC 2.8, which i downloaded and installed today, however i still get the same error. I have had my communications and network admins check traffic and connectivity to the smtp server and all is working fine. Yet I still get the error.
I have programs written in VB2005 accessing mdb database in server. When the server run XP, it was never a problem (at the time, the folder was shared to all). There is a new rule in the company and we have Win 2003 server, and my mdb file must be stored in a folder in the server that the administrator (not I) have installed password. And clients are supposed to access it as user only. I can ask password as administrator, but the users of my program must not have the administrator password (which I can included in my program if necessary). How can I modify my program so that it can access the database? I assume I must modify my connection string, but I do not know how. I am currently using this:
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source= C:Integrity ERPPBF.mdb;Jet OLEDB:Database Password=ABC"
working on an application which performs a set of operations on Active Directory based on an op code.The application was developed long back and has been working fine. I recently made few changes, which is causing the Server to run out of memory whenever the program is being run. I also modified the code to make sure that the variables being declared in each function are set to "Nothing" at the end of function so that the memory can be collected by garbage collector. To make sure, I'm also forcing garbage collection to take place at different parts of the program. But, I still continue to have the issue. The program is very big and hence I could not upload it.
The code retrieves a list of rows from a table with opcodes in it and based on operation code, it performs a set of tasks. The problem is that when it loops through each row in the table, the size of memory required by the program keeps increasing (> 1 GB) to the point where the Server (Windows 2003) is crashing. I have tried different profiling tools, but none of them have been able to detect any memory leaks in the program. I'm guessing that the resources are being held up and hence causing this issue.