[Code]...
First i populate the data i wan in a listview than i click on a button to export all the data in the listview into a notepad call default.txt but upon clicking the button i realise that there no data inside my notepad
I want to create a notes app for Windows Phone 7 using Visual Basic.I have read a few tutorials but they are all suited for C# not VB. Basically, I have a main page and a page to add notes. Once the user types out a note on the add notes page, the title of that note appears on the main page. I also want the user to be able to select that title and it will display the note. I have done a bit of research and I know I will need to use isolated storage (not sure how to implement it in VB) to save the notes. I think I will also need a list box that will store the title of the notes.
View 2 Repliescurrently i have created a note pad which contain names
For Example : ( inside the note pad ) Sam1
Candy1
John1
But it not showing up in my listview1 box , it seem to go straight into the Error Msg ( File not found )
Private datCallDefaultResult As StreamReader
Private Sub frmTesting_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
I have an application which has a label, set to multiline. This area of the app is for notes and comments. One of the database tables behind the app is specifically for thenotes/comments table.I want to set it so that when someone puts in a new entry, the date is auto-inserted so we can see when they did it.
View 3 RepliesI've written an VB application and have successfuly got it into the form of a web page using Visual Web Developer (VWD).The application has a link which opens up another web page in a new window. I would like it that code triggered by a Button on this application will only run if the web page has been opened via this link. In VB it was easy as clicking a Button object made code run (which opened up the WebBrowser within the application) and I could therefore include a line of code such as eg. trigger=1 (and then later I could use "if trigger=1 then"). But in VWD Toolbox objects "Link" and "Button Link" take you directly to the web page (ie they are hyperlinks), without giving me the opportunity to include my "trigger=1" line.
View 3 RepliesI used vb2008 and make a good application and make setup file by advanced installer builder .And install and use one month then I formatted my pc .Then install my application without install vb2008but I get a warning message as
View 1 RepliesI have three Tables in the MS Access database as below:
Company_Data
Name|Age|Department|Salary
User_Data
[Code].....
and i have a compare button on the VB form. Is there any code that can compare the Company_Data with User_Data and copy all the records not found in User_Data to Changes_Data table. When updating it should update the "updated on" Column to the current Date.
Same needs to be done in the opposite way. Compare User_Data with Company_Data and note the diff. No Need to update Salary in this case.
I have three Tables in the MS Access database as below:
Company_Data
Name|Age|Department|Salary
User_Data
[code].....
Application - Powerpoint 2003
VisualBasic - 2008
I want know, How can i extract the power point note text?
[Code]...
Dear Moderator Sorry for posting it here. Could not find a proper place for posting Query related post and also it was urgent. I have a database in MSAccess.I have a table as tbl_Menu.This table has a parent child relation ship.Parent Node is : MenuItemId and its Child Node is : MenuItemPopUpHeaderID
[Code]...
I am using the following code to create an email note[code]...
View 2 RepliesI would like to make a sticky note using Visual basic 2010 express. Is that possible ?
View 1 Replieshow Work setup or an executable file in Visual Basic Dot Net 2008 note that the program is linked to a database
View 1 RepliesAlright I am trying to make my checkbox have like a little discription on what the check box means when the users mouse is hovering over it. How would I do this?
View 5 RepliesI am rather new to VB and every now and then I get an idea of a small project I would like to work on to increase my skills. What I am trying to do is:
1. Input the sound from the microphone
2. Detect what pitch the sound is
3. Compare it to the pitch displayed
For example, lets say I was to have the button "Start". When start is clicked, a pre determined (Or possibly random) note is displayed through a Label for 5 seconds (Lets use C as an example). During this time, the user can attempt to match the note C. When the user sings through the microphone VB picks it up, detects what note the user is singing at, and then scores him over the 5 seconds based on the difference between his note and C. It would also be nice if I could display the volume of the microphone, but this is not too important.
I'm pretty new to VB and I chose a project for school to recognise the pitch/note of a sound comming from my microphone (Which I'm using singular notes using my Guitar). I have no idea if this is even possible :/ So if possible, what things should I be considering and what I pretty much need to do to get the ball rolling for me
View 1 RepliesWhat i need it when you select a row, it will add the Note to the richbox. For example when i select that row, it will add "this is just a test " to the richbox. How would i do this ?
View 2 RepliesI want to make a program that detects the note that is being played in front of the microphone. I am testing the FFT function of Naudio, but with the tests that I did in audacity it seems that FFT does not detect the pitch correctly. I played an C5, but the highest pick was at E7.I changed the first dropdown box in the frequency analysis window to "enchanced autocorrelation" and after that the highest pick was at C5.
View 3 RepliesIn VB.NET 2005. i am trying to experiment with sound. I started out trying to produce a single note at a single left-right position, for a particular duration (maybe until i shut it off. with a particular frequency.It can be a sine wave, or a square wave or maybe a general midi sound. This seems to me to be a simple task, but i cannot find out how to do this.I suspect that the answer lies inside direct sound or xaudio2. I want a simple solution i don't want to have to spend 1600 hours learning xaudio2 in order to learn how to how to make a beep.The ideal answer wold be for me to write a routine that accepts waveshape,freq,volume,Stereo_Position,duration).
View 4 RepliesPossible Duplicate: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive
I am using window xp and iis 5.1 to run the application.
error is occurred Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.
[Code]...
I have the following classes:
Product, Service and OrderItem
Product and Service must inherit OrderItem. So basically I want to store OrderItem object in my shopping cart and these object are store in a list.
Public MustInherit Class OrderItem
Private m_enuItemType As TypeOfItem = TypeOfItem.None
Private m_strUserID As Integer[code].....
There is this software called Harping midi. You can view it here [URL] I would very much like to recreate this software but extend on it. For example. I would like to be able to pick up the "midi notes" and then translate that to guitar tabs. I would like it to have the same features (channel filters, tempo control) those sort of things. Where would I start???
View 1 RepliesI am really new to Visual Studio and VB and I am having trouble closing a single form:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
End Sub
When I use Me.close() associated with this button it closes the entire project and not just the single form can anyone.
i'm working with crystal report and i use (if not ispostback) to set X and in else to retrieve X . the problem is its working properly in some pages and not working in others.this code sample.
If Not Page.IsPostBack Then
Session("VehicleStatusSelectionFormula") = SelectionFormula
Else[code]....
the problem like i said in last note with ("EnableViewStateMac="false") it make ispostback true all the time.
I'm trying to put data in my listview but the data doesn't show in my listview.
When i put this code in my form i dont have any problem but when i put this inside the module the data doesn't show up.
Code:
Public Sub getEmployee(ByVal myConnString As String)
Dim mySelectQuery As String = "SELECT names FROM employee ORDER BY ID ASC"
Dim myConnection As New MySqlConnection(myConnString)
[Code].....
why my crystal report dosesnt show any of my data.
View 2 RepliesI don't understand what's going on here I published my project, and when I create new records and save them, everything gets saved and shows up each time I run the program.I open the database in SQL Server and none of the tables have the new data, but it still shows up when I run the program each time.
View 15 RepliesPrivate Sub CreateChart()
Dim time2, tp As String
Try
[code]....
I have a user control that contains a search value text box a button, and a datagridview to display what the data adapter found. In the data set designer, I have an ODBC connection to a table, with two SQL queries defined FillByCustomerName(NAME), and FillByCustomerNumber(CUSTOMER_NUMBER). If I preview the data in the designer, I see the data expected. The datagridview doesn't show any data. The functions PopulateGridByName and PopulateGridByNumber do the work. I've tried adding a dgCustomer.show statement, The form that calls the user control has no codebehind code, and throws no errors.
Private Sub btnSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSearch.Click
Try
Dim SearchValue As String = CreateSearchValue()
[Code].....
I've run into a problem that I'm at a loss to understand and/or work around. I'm working on a settings page that updates an XML file. The page has an XmlDataSource with a transform file (to filter and sort the values) and a DataList that is populated from the XmlDataSource. A user can enter a new group name into a text box and click a button to submit the form. When this happens, the new value is successfully added to the XML file.
[Code]...
