Given this Short (signed):
&Hxxxx
I want to:
Extract the most right &HxxFF as SByte (signed)Extract the left &H7Fxx as Byte (unsigned) Identify if the most left &H8xxx is positive or negative (bool result)?
How can I efficiently find the location of the first instance of a four byte sequence within a byte array? Is there something more efficient than looping through the whole array, or a built-in method?
I'm searching through a byte array for a pair of CrLF. I can't convert it to string for an InStr first because I need the position of it in the original byte array.
I am trying to figure out the location of this, as it delimits between a string portion and a binary portion, similar (well, exactly like for this part of it) to an HTTP header. There is a string portion, and two CrLf before the content begins.
K, I'm not sure which forum this question goes in, so I am putting it here.Here's my problem.I have a customer file [CSV] I am importing to SQL. I am using JET to read it into a dataset. I am using a schema.ini file to define columns, because I have one column with up to 1000 characters in it... so I have to define it as a Memo field so it won't truncate at 255 characters.
View 7 RepliesThis illustrates a series of bytes that I've received from a socket and assigned into a byte array (frameData). How do I extract the ascii string from frameData if FrameData.Length is 79 bytes long and I need to extract the byte locations whose begin -frameData(26) and end frameData(44) are given by the arrows I've drawn?
View 3 RepliesI'm using WinPcap to capture incoming data. Basically I'm dealing with a continuous stream of incoming data, either as byte array or as memorystream (pieces up to 64kb).
I need to check this data to see if there's a certain url and then extract it.
The url I need to find looks like this:http://201.122.38.5/data/today/798572987-589571?139805890582 The length of the 'code' after "/today/" is always the same. The IP address changes. What's the best/fastest/most efficient way to continuously check these byte arrays or memorystreams and extract the urls without hogging the CPU too much?
[Code]...
Why does C# define Byte+Byte=Int32 instead of Byte+Byte=Byte like VB?
View 1 RepliesObjective: Combine byte arrays, read specific sections, and then cut byte array at specified point.
Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....
I'm not sure if I have this right to begin with because I can't test it without having it completed.
I create my algorthm and its finished but there is a problem, it encrypte all text and all text in a file but after decryption when i open my file (a video file)the player show all information about file(duration,size and ect) currectly but it dont play that my program encrypt and decrypt byte by byte and place a asci code in bytes(0 to 255)
View 12 RepliesI just converted the following code from c# to vb.net. It is functional and works correctly with my company's firmware/devices. My next challenge. Previous serialport code used much more readable structs which where then converted (after building a packet) into byte() automatically as part of the serialport encoding. (this is my understanding)How could I
1. morph byte arrays 'ToSocket' and 'ToMTP' below into structs and
2. convert into byte array for Socket.BeginSend(byte(),.....) to stream out to remote devices?
Imports System.ComponentModel
Imports System.Text
Imports System.Net.Sockets
[Code]....
how to upload file using fileupload control into sql database. I have class where i created insert function and getting info frm the .aspx.vb file
Class File
========
Imports System
Imports System.Data
Imports System.Data.SqlClient
[coe]....
Is it possible in VB to truncate a larger data type ( an int with a value greater than 255) to a smaller one, say a Byte (which only goes up to 255) in a way such that the 8LSBs of the integer are copied to the newly created byte. I have tried this using CType with the following code, however it does not work.
Dim TestByte As Byte = CType(Test, Byte)
Where the variable "Test" is an integer with a value of 419. This code always results in the Overflow exception.
[code].....
I have 2 byte arrays. I want to merge these two byte array into 1 byte array.Usually, I just create a new byte array with length = byte array #1 + byte array #2. Then copy byte array #1 and #2 to the new byte array.do I have more efficient way to merge 2 byte array using VB.NET and .Net 4?
View 2 RepliesI would like to create a function so that I can pass a string and it will return me the binary value, I will use this later in other parts of the script but I am getting an error that I don't understand.
Private Function ConvertToMD5(ByVal OldPassword As String) As Byte
Dim NewPassword As String = ""
'The string we wish to encrypt
[code]....
On the "Return hashedDataBytes I get "Value of type '1-dimensional array of Byte' cannot be converted to 'Byte'"
How could you convert a IntPrt to a Byte Array (Byte()) ?
View 19 RepliesI have a byte array that I convert into a string like so Dim byt As Byte() = New Byte(255) {} s = New String(Encoding.ASCII.GetChars(byte))My question is when I look at the string in a debuger its clearly a normal string but when I compare it to what I know its supposed to be it doesnt equal. So i did a quick check and for some reason its return a string thats the length of 256 characters. So i did a s.trim and it still is 256 characters long.
View 1 RepliesI would like to know how to convert a unisgned byte to signed byte
Atm I got this
a
Function readSignedByte() As SByte
'-128/127
Dim b As SByte
[Code]....
it doesn't work one that well works for numbers positive over 127 if lets say ReadByte() has 128 it would give overflow error which I don't want it to give I would like it to overflow the number to negivate value aka its signed value.
given my code below, I'm trying to figure out how to create an array of 1 byte containing 7 bits. So the byte in the array would contain 0111111 to correspond to mData_Out's boolean values. How would I change the following code? [Code]
View 8 RepliesI am trying to write some code to get a kinect for windows sample running, which is originally written in C#. I get stuck with translating the following C# code to VB.NET:
byte intensity = (byte)(~(realDepth >> 4));
What is the VB.NET equivalent for the code above? how to translate the "~" code sign.
I need to parse a text looking for the string - [[Extract|xxxxxxx]] and extract the xxxxxxx characters.How would I do this?
View 2 Repliesif a byte value can go up to 255 and two bytes are used to determine the length of packet payload data, how would I convert the two bytes to create one integer value?
State.buffer[13] = 5 and State.buffer[14] = 67
Dim PacketLengthHigh As Integer = state.buffer(13)
Dim PacketLengthLow As Integer = state.buffer(14)
[code]....
Is there any method to get the 3 char code from System.TimeZoneInfo.Local?e.g. EDT instead of Eastern Daylight time etc.
View 1 RepliesIn VB.NET: If varShort is a Short and varBit is a value from 0 to 15, how can I set the bit in varShort identified by varBit without disturbing any of the other bits in varShort? My problem, of course, is with the most significant bit, bit 15. Since varBit is determined at runtime
View 2 Replieshow can i put short cut ket for the buttons i made?example i made a button name PRINT.how can i make that ctrl + p to be the shorcut key format?
View 8 Repliesim working on a small application that lets you input a phone number with "-" hyphens, and then copy that number to a label control minus the hyphens. So for instance 111-234-567 would become 111234567, i have accomplished this using the string.
replace command, however i was wandering if it would be possible to iterate through the string with a for next loop looking for the hyphens and then removing them with the string.
remove command, ive spent nearly 5 hrs trying to get the code to work, but to no avail, no errors are being thrown up, but the hyphens still display along with the number, i am currently teaching myself, and its a sloooooooow process. here is my unsucessful code
[code...]
I'm familiar with creating tables, updating, deleting, etc. etc. using a seperate VB program and a MS Access database.
However, I would like to know how I can start manipulating reports.
For example:
The user selects items in a combobox to filter certain items in a report.
The user selects a radiobutton to determine how the report is ordered (ascending by what field)
I've tried attacking this problem using VBA, but I haven't got very far. I couldn't even make a OnClick event procedure to execute the code I had written.
I don't understand that error that occurs on the second line of code below. I'm trying to skip over the first 18 bytes of a byte array that I'm accessing from a c# dll into a local vb.net byte array
View 3 Replies[code]'when i enter 'Q' key output(textbox1.text) = 'qQ' how Show Q only''' 'and how i can set multi shortkey output = CTRL+TAB+CAPS LOCK,and bla bla , and send to Timer1' End Sub.[code]
View 2 RepliesHow to Covert a long name to short name??? for example: How to convert Visual Basic name into VB
View 1 RepliesHow Can I Short My Data in datagrideview. I want to short by coloum like I have a OLOUM Received_Date I want to short this coloum.
View 2 Replies1. i need to find the place / city / location from IP address. does anyone know about this?
2. I want to know if there is any way to get a short URL for the db entities(i.e; if i press my website and type a db content it should go to a new page)for ex i have a site called [URL] here in actual code if i press [URL], it redirect to new page to display the content of abc.Now, what i want is i need to type [URL] and it should redirect to new page with info abc.