I am trying to send E-mails asynchronously and it works fine as long as there isn't an AlternateView attached to the e-mail. When there is an alternate view, I get the following error:
Cannot access a disposed object. Object name: 'System.Net.Mail.AlternateView'
System.Net.Mail.SmtpException: Failure sending mail. ---> System.ObjectDisposedException: Cannot access a disposed object.
[code]....
Protected Sub btnLocalSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnLocalSubmit.Click
Dim logic = New connections
logic.emailsToSend(User.Identity.Name, getURL, reportedBy)[code]....
I am using the smtp clients SendAsync() function to send out emails asynchronously...but this function does not work ...why?? i do not get any email..when i send it Synchronously...i get the emails, this means my settings are correct...so what is wrong with the SendAsync() method??
I tried running code analysis the first time and found what it appears many others on SO doing the same have found: an abundance of
In method 'SomeMethod()', object
'SomeObject' is not disposed along all
exception paths. Call
[code].....
I seem to be getting a random abject disposed exception.Sometimes it occurs when I move from 1 form to another, sometimes it happens when a timer activates.It says the object name is "". How am I supposed to look for an object called nothing. I'm using vb express 2010 on windows 7.
Code:
System.ObjectDisposedException was unhandled
Message=Safe handle has been closed
Source=mscorlib
[code]....
I am having trouble trying to figure out why I'm getting this warning in following code.
CA2000 : Microsoft.Reliability : In method 'Encryption64.Decrypt(String, String)', object 'des' is not disposed along all exception paths. Call System.IDisposable.Dispose on object 'des' before all references to it are out of scope.
[Code].....
I am using VB 2008 Express Edition.I have an app that has 2 forms (will be adding more). Button click on form1 opens form 2. The first time I run my app everything works fine, but when I click the close 'X' button on form 2 and try opening form 2 again by clicking the button on form 1, VB throws a Object Disposed Exception, Cannot access a disposed object.[code]
View 13 RepliesI am getting the following Exception when calling MyBase.Dispose ()ObjectDisposedException was unhandled.I tried adding a Try Catch around the call but it doesn't catch the exception.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
[code]....
FYI: The value of disposing is False
I am have an exception when I run the following code :
Private Sub MainMenuForm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Try
'Save the Sum of the Existing "Excel" Processes:
For Each Proc As Process In Process.GetProcessesByName("excel")
[code]....
I get this:
Cannot access a disposed object.
Object name: 'MainForm'.
Here is the code I'm running. It's after the MsgBox "Readme file cannot be found. Please put the original readme in the current working directory of this executable." (and it's dismissed) that I get the unhandled exception error.
Private Sub MainForm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim readme As String = My.Computer.FileSystem.CurrentDirectory + "
eadme_ctb_v100.txt"
MsgBox(readme)
If My.Computer.FileSystem.FileExists(readme) = True Then
[Code] .....
I use DataGridView in my project. Everything worked fine until I added some code in the RowValidating event. During the form_load event exception is thrown on the statement that set the datasource of the DataGridView.The project uses bindingsource for the datasource of the DataGridView. My validating code is shown below:
Dim currentRow As DataGridViewRow = Me.dgExpenditure.Rows(e.RowIndex)
Dim incexpCell As DataGridViewCell = currentRow.Cells(0)
If Not Me.closingBoolean Then
[code]....
I debated whether or not to ask in the database section, but decided this was probably more of a VB question, than DB.I'm performing a query on my database and add its value to a DGV. At the moment, I'm just running tests to make sure the base example works so I can expand on it for more advanced tests.[code]It doesn't matter how I add the row, just adding it causes the error. And yes, the AllowUsersToAddRows property of the DGV is set to True, which wouldn't cause this problem anyway, but I decided to be extra careful.
View 1 Repliesi want to run a query and use the result for something else in my vb.net code. I have, opened the connection, passed the query and the connection object to the SqlCommand object and read it with the datareader object. The DataReader's HasRows property's value evaluates to true but i get an InvalidOperationException when i want to access the results of the query with the DataReader.[code]
View 1 RepliesI'm having an issue with updating a couple list boxes in the form load procedure. I have an array created from a MySQL database, and when I try to add that array to more than one ListBox, I get: A first chance exception of type 'System.ArgumentNullException' occurred in System.Windows.Forms.dll
[Code]...
I'm getting a "IndexOutOfRangeExeption was unhandled" in my project
Private Sub LookUpButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LookUpButton.Click
'Look up the information on the state.
[Code].....
I'm about ready to give up and go another route. I just thought I'd ask here.
For Each ScreenName As String In da.settings_LinkedScreenNames
View 5 RepliesI have the following method to strip hidden and user-specified columns from a gridviewrow and return a tablerow. [Code] However, when I run this code and hit the Add method for the TableRow, I get an InvalidOperationException stating the Collection was modified; enumeration operation may not execute. I've gotten this exception before, but usually it's because I'm attempting to modify a table that is databound.
View 3 RepliesI am trying to show a dialog from one of my WPF view model commands however when i call ShowDialog() it throws a System.ArgumentException?
Here is my code:
Public ReadOnly Property OpenParser As ICommand
Get
Return New RelayCommand(Sub(param As Object) OpenParserExecute(DirectCast(param, Frame)))
End Get
[code]....
I was working with a class used to update database.All things were working for 3 years perfactly.Now it started throwing exception for two records only.When i edit these two records and try to save back to db it throws exception.Else it works fine.
View 3 RepliesI remove the datagridviewcomboboxcolumn from the datagridview and dispose it. When I go to dispose of the datatable that is the datasource to the comboboxcolumn an ArgumentOutOfRangeException is thrown from the datagridview. Apparently the datagridview is still handling events for datagridviewcomboboxcells for comoboboxcolumns that have been removed from the datagridview.
View 8 Repliesi am writing a program that will store some passwords in order to make it more user friendly. Ofcourse i want to encrypt it and so i started to learn how to use the 3Des encryption method.
[Code]...
i am trying to develop a simple app to automate binding of data from access db for filling a form in a sequential order vb 2008 express. an error keeps coming up 'expression expected' on an sql query in the code i wrote. the code is shown below:
Private
Sub STARTButton_Click(ByVal
sender As System.Object,
ByVal e
[code]....
I'm getting this exception in the designer when I try to look the form that contains the tab control in design mode. After I click OK, the designer simply shuts down
View 1 RepliesVB2008 (in VisualStudio) and automation of tasks in Excel. My work env.: PC#1 - WinXP Sp3 with VisualStudio & Office O27k (all US-EN) installed, PC#2 - when I am not at home I use an Laptop with WinXP + O27k (DE) and VisualStudio(US-EN), but the mix of language does not seem to be a problem - at least until now!
In one 'TestBench' appl. I have the following line of: oWB.Names.Add("DR_AppData2", RefersToR1C1:="=OFFSET(AppData!R3C1,0,0,(COUNTA(AppData!C1)-2),1)")
Where 'oWB' is a WorkBook Object and 'Names' refers to named regions in an Excel worksheet. I am adding a new 'Region': DR_AppData2 and assigning a dynamic number of rows.
The above line works perfectly well on 'PC#1' but throws an exception on 'PC#2' and this has really irritated me, and I find no reason for this behaviour! The Project environment and included references / resources are truly identical, because I copy the project data from one to the other. The only real difference is in the object library reference, on 'PC#1' Excel.exe is in English, and on 'PC#2' is in German. Having said that I have also altered the value assigned in : "RefersToR1C1:=" to the equivalent in German, but the error thrown is the same.
I have attached :
1. Screenshot of the error
2. Exception Details
I'm creating an application for my own use that allows me to notify my lawnmowing customers when their grass was last cut, how much they owe, etc. The application uses an SMTP client to send a MailMessage to the customers through my Yahoo! online email account. The code for sending the message is as follows:
[Code]...
However, every time I try to send the message I get an error message that says "Smtp Exception" and "Message could not be sent" or something of that sort. I have tried the following to remedy the problem:
Using different ports and clients found online Using a "Try...Catch" method to handle the exception. Every time I attempt to send the message the exception is thrown Can anyone offer some advice on how to fix this? The exception is rather vague and doesn't offer a whole lot on what needs changed, like an improper port or something.
I have done a access setting in registry in HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerSettings. Here i have given no access to the "Setting" and when i try to create a linklable in windowform i am getting exception. Ex:
The control System.Windows.Forms.LinkLabel has throw an unhandled exception in the designer and has been disabled. Exception: Requested Registry access is not allowed.
Stack trace:
at System.Windows.Forms.LinkLabel.get_LinkColor()
Exception Text:
System.Security.SecurityException: Requested registry access is not allowed.
at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
[CODE].......................
I'm calling Sqlcommand.ExecScalar() - stepping through the stored proc works fine, right under
RETURN @RecordNum
@RecordNum correctly contains a bigint, as scoped. When I step into the RETURN.. I get an exception thrown, that visual studio does not seem to be able to capture.
The stored procedure works fine when executed directly, and returns a value without problem, and it seems like all is well, stepping through it from my code.
But as soon as I step into 'RETURN @RecordNum' (and recordnum contains a valid number..) BOOM! EXCEPTION! (and no details in the exception either back in visual studio.
I'm blaming a glitch in the matrix.
I've turned off even assigned the return from the ExecScalar to anything, same result.. I've tried ExecReader(), same result. I have turned NO COUNT on and off, same result. If I wasn't already bald, I would be now!
Goal: Load a validated xml file in to memory, traverse through the document to create objects and load object properties with values in named xml tags.Problem: How do I deal with missing tags?Amplifying information: in this example, there are three values I'm looking for; name (mandatory), location (optional), comments(optional). I found the problem in prototyping the solution. My inital test was with an xml file wtih all fields present. It works fine as long as I don't have nanespace declarations in the root element. However, if I leave them in place I get a null reference exceptoin. The same thing occurs if I leave off an optional tag. It appears that if the Element I'm trying to get a value on doesn't exist within that element, a null reference exception is thrown.
Code:
Private Sub btnImport_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnImport.Click
Dim xelement As XElement = xelement.Load(txtXMLfileLoc.Text)
Dim ICAOxs As IEnumerable(Of XElement) = xelement.Elements()
[code]....
Okay, so I wrote a few custom ItemTemplates for VS2010 that implement IWizard in VB.NET (4.0). Straight forward enough. They work during my testing, but when someone else deploys and attempts to use any of them, Visual Studio throws an incredibly generic Exception has been thrown by a target of invocation error.
Stranger still, after they open up the project properties and try again... they work. Without changing anything. Anyone have any clue what is going on? Or perhaps even just a way of getting VS to give me a more specific error? I already tried devenv.exe /log but nothing out of the ordinary was there.
I've got a code sample below that will compile, but not run. Start it in the debugger by clicking the "step into" button on the toolbar, and an exception pops up before it reaches the first line of user code:
"Could not load type 'TestPrivileges.Win32Module+TOKEN_PRIVILEGES' from assembly 'TestPrivileges, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'."
Comment out either the 'Dim ... TOKEN_PRIVILEGES' line in the module or the 'Public Shared ... TOKEN_PRIVILEGES' at the end of the class, and the problem will stop occurring.Visual Studio 2008 as well as 2010 does it.
Module Module1
Sub Main()
Dim newState As Win32Module.TOKEN_PRIVILEGES = New Win32Module.TOKEN_PRIVILEGES
MsgBox("Here I am")
[code]....
I am using .net 2.0 and I am getting an exception of system is out of memory. My existing function takes datatable as input parameter which contains little bit large data (eg. more than 35000 rows) and in that function I am appending some xml node data and atlast I am returning the stringbuilder as a object.
[Code]...