.net - Pivot Cache Type Mismatch Error Excel
May 2, 2012
Please see bottom edit for where I am currently at I have created a pivot table that works fine when the pivot cache is defined as:
Dim ptCache As Excel.PivotCache = mainHighway.PivotCaches.Add(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=mainHighwayData.Range("a1:v7500"))
My problem is that the number of rows changes from day to day, so I figure out the number of rows in the worksheet and then use that in my pivot cache:
Dim highlRow As Integer
highlRow = mainHighwayData.Cells.SpecialCells(XlCellType.xlCellTypeLastCell).Row
Dim ptCache As Excel.PivotCache =
[code].....
This returns the proper number for the last row, but once again throws the same type mismatch error.
Edit: I found out another bit of information, but I am not sure what to do with it. The pivot table works fine if the values in it are <= 65536, but the second I increase the range to 65537 I get the type mismatch that has been haunting me. This is true for all numbers >= 65537. I know that 65535 or there abouts used to be the last row in excel, but that is no longer the case. Also when I create the pivot table manually in excel I have no trouble and it has all of the data. I am using int or long, so it should not be an overflow or anything. Anyone have any thoughts on why VB.NET will not let me make a pivot table based on data with more than 65537 rows?
View 2 Replies
ADVERTISEMENT
Sep 10, 2010
I have tried repeatedly to use a For Each Next statement inExcel 2003. The intent of this is to ititerate through a predefined selection of cells and set the value of the cell 3 columns to the right based on the value of the cell in the selection.
The latest code I have tried to use is the following:
SR.Range("a5").Activate
SR.Range("a5", ActiveCell.End(xlDown)).Select
Selection.Offset(0, 5).Select
[code]....
Where SR is the active sheet. (I have only been introduced to VBA and code language for a few weeks, so I am learning as fast as I can. Please excuse my ignorance!)When I get to the 'If x.value' line I get the type mismatch error. I have tried to set my "each" to variant variable types and my "collection" (or selection as it were) to different variable types and constantly I am getting this same error regardless of my efforts.
View 7 Replies
Nov 4, 2010
I am searching for interger Id in a database using SELECT statement to search for the BranchId, I am passing this Interger Id to StrSQL which is defined as a string. I know that this is wrong but I do not know how best to do it.
[Code]...
View 2 Replies
Dec 13, 2010
I have a project in VB6, when I am executing this project locally it is working fine, when I am trying to execute it remotely it is giving the error like "RUN TIME ERROR 13, Type Mismatch"
View 9 Replies
Jun 21, 2010
data type mismatch criteria error .. please help im getting this error .. and i don't know where's the error ..
Private Sub frmUpdateChapter_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = D:dbCAI.mdb"
con.Open()
[code]....
View 1 Replies
Jul 13, 2009
I have the following VB code that I'm trying to create a text file if the results from the SQL query is greater than zero. Here's a screenshot of my error i'm getting.
[Code]...
View 1 Replies
Sep 24, 2011
i already converting to integer, but why still got the error when create new record?Data type mismatch in criteria expression.
red section error
table (da)
field itemcode(integer),description(text),Quantity(integer)
my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
View 9 Replies
Dec 20, 2011
I have looked at this for hours and can't seem to figure out what is causing the datatype mismatch. I am trying to insert from asp.net to a access database
insert statement:(ignore the poor practice with the concat parameters)
Dim BSSQL As String = "insert into bodyshop (startdate, enddate, frontbump, rearbump, touchup, other, vehicleid)" & _
"values('" & StartDateBodyShopTXT.Text & "','" & FinishDateBodyShopTXT.Text & "','" &
[code]....
here is a snapshot of the table:the format of the yes/no fields is "true/false"
View 2 Replies
Feb 13, 2011
I have written an application for my family business. It works fine when I try it on my computer, which I've used to write the app. But it gets the "Data type mismatch in criteria expression" error when I try to save data on the computer where the app is installed and will be used on.I don't get it. Is it because of the operating system?
View 6 Replies
Dec 12, 2010
I am using select command for one of my button
Dim edit1 As OleDbCommand = New OleDbCommand("select * from [exporter] where exp_id='" & t1.Text & "'", con1)
now:-
t1 is a textbox
and in my table exp_id is "Number" now when i run this i get an error at the time executing reader (Data type mismatch in criteria expression.) but when i change exp_id properties to "Text" it run's properly
View 6 Replies
Jun 8, 2011
My problem is that When trying to insert a statement into an MSAccess file I get this message: Data type mismatch in criteria expression
[code]...
View 4 Replies
Oct 31, 2011
I'm looking to find the nearest number to 5 in the column row and order it so closest is at the top. Here is what I got....
[Code]...
View 2 Replies
Dec 7, 2011
I have an error ERROR [22018] [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. and I've been trying to solve this but unfortunately I couldn't get the hack of this error. I'm a newbie in dotNet.
Public Sub LogInContinue(ByVal senter As Object, ByVal e As EventArgs)
Dim LibDS As DataSet = New DataSet
Dim LibDA As OdbcDataAdapter = New OdbcDataAdapter("SELECT * FROM tblUserAccount WHERE Uname='" & txtUserName.Text & "'", LibConn)
[code]......
View 2 Replies
May 2, 2012
I am creating pivot tables in VB.NET and have run into a problem I did not think would be as difficult as it is turning out. When I create a pivot table it adds in subtotals for each row and I do not want that. In excel you just drag down the subtotals option and tell it to not display subtotals. I looked into the VBA for it and it is several lines long of this format:
ActiveSheet.PivotTables("Main Highway Pivot").PivotFields("Division"). _
Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _
[Code].....
View 1 Replies
Oct 28, 2009
I'm trying to generate a pivot table in Excel using VB.NET 2008. I need to bring the data into one tab, and then generate a Pivot on another (i can't do this externally because the data is pulled from a bunch of different places). Currently I'm doing this pivot in the actual code, and then writing to Excel, but it takes up a lot of resource and time and this will make things much easier! I created a sample list below, and I am trying to generate a sample pivot table based on it, but I'm getting errors:
Dim wb As Excel.Workbook
Public Sub ExcelGen()
Dim ex As New Excel.Application
[code]....
The error I'm getting right now is the no object reference set error on the "pCat =" line...
View 2 Replies
Jan 7, 2009
How to create a pivot table on an Excel spreadsheet via code. The reason I took so long is because I added a reference to the Excel Interop 12.0, rather than the Excel Interop 11.0. I assume that 12.0 is for Excel 2007, while 11.0 if for 2003 (or whatever I have). If that assumption is correct, this will cause me a bit of trouble, as all the people using the program are in the process of moving from 2003 to 2007, and I should have moved myself, but didn't for some reason unknown to me (I thought the upgrade was pushed out to my computer when I was at work, but I don't seem to have it anymore). However, my concern is that the objects needed to create a pivot table in the 12.0 library are significantly different from the objects needed to create a pivot table in the 11.0 library.
I don't believe I can late bind to solve this, because there will need to be different steps taken depending on the version, since the objects have different interfaces. It appears to pertain only to pivot tables (for what I'm doing), as I was able to create the workbook, the worksheets, and export all my data with some old code that I had, and all of that worked with both libraries, the difference is just with the pivot tables because the interfaces have changed, such that the methods needed for one library don't even exist in the other one (and the code crashes, but that's probably because I have the PIAs for 2003 installed, and not 2007).
View 2 Replies
Jul 2, 2010
I have a table of data in Excel 2003 of which I have managed to automate through a VB.NET application to create a Pivot Table. (Will be doing hundreds of these and therefore cannot just run a macro each time...will put the code in a for loop for each spreadsheet in a directory) My problem is that I am trying to create a pivot chart based on the pivot table.
Some code below....I need to create a pivot chart based on the pivot table below!
CODE:
View 1 Replies
Aug 7, 2011
I want to change the source data for my pivot table in Excel using VB.Net to a named range.
I have : table.ChangePivotCache(wb.PivotCaches.Create(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=sheet.Names("name_of_NamedRange").RefersToRange))
Exception : The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
View 2 Replies
Aug 23, 2011
I have three tables, the extremely simplified versions of which are:
Practitioners:
practitioner_id :: int
name :: nvarchar
Insurances:
insurance_id :: int
name :: nvarchar
InsuranceLink:
practitioner_id :: int
insurance_id :: int
So, the practitioner table contains a list of practitioners, the insurance table contains a list of insurances, and the link table represents which practitioner supports which insurance. Now, I need to create a view which can display the information like this:
ViewTable:
practitioner_id :: int
practitioner_name :: nvarchar
insurance_1 :: bit
insurance_2 :: bit
.....
insurance_100 :: bit
In other words, the columns in the view are the ID and name of the practitioner, and every insurance that exists in Insurances (with the insurance name as the column name (there is an enforced condition that insurance names are unique)). The cells in the insurance columns will indicate if that practitioner supports that insurance. Or better yet, is it possible to use an excel-style pivot table on a DataSet in a VB.NET form?
View 1 Replies
Sep 9, 2011
I'm using EPPlus to create Excel reports. Now i'm trying to create a Pivot with a DateTime PageField, so that the user can filter the period he want to see by himself. But although i can filter this for year,month or days in the according data worksheet by default, i don't get it working in the Pivot.
Here is what i have:
Dim wsPivot = excel.Workbook.Worksheets.Add("Pivot")
Dim wsData = excel.Workbook.Worksheets.Add("Data")
Dim source = workSheet.GetDataSource
[Code].....
View 1 Replies
Apr 19, 2012
I am trying to interface with a legacy MFC out-of-proc COM server. Some by ref arguments work fine (like long*) the other (IUnknown**) give me a DISP_E_TYPEMISMATCH, no matter what I try. Example:
COM server:
long CNAVDocViewer::getMainWindowHandle(long* _plhWnd)
[code]....
Works...getting the right value, however:
COM server:
long CNAVDocViewer::closeAllDocument(IUnknown** _ppitfEreur)
VB.NET
(I've tried all the following types, none works)
' DISP_E_TYPEMISMATCH
Dim err As Object = Nothing ' No
[code]....
The value returned by the COM server is NULL if no error happened in the function, otherwise a DQSERROR COM object. I spend two days reading articles on this and IntPtr should do the job, followed by Marshal.QueryInterafce() but it does now work.
View 1 Replies
Apr 19, 2010
I'm trying something which should be very simple, I have an access database with a column of dates and I want to select a specific date.
Dim StartDate As Date
StartDate = txtStartDate.Text
Dim DBconnection As OleDb.OleDbConnection
Dim strSQL As String = "SELECT * FROM ClientData WHERE Dateofarrival = '" & StartDate & "' "
I keep getting the error "Data type mismatch in criteria expression". The data type in access is set as a short date.
View 2 Replies
Feb 27, 2009
I'm using Visual C# 2008, when i tried to merge my Excel DataTable with my Oracle DataTable for an Update.It prompt out a column that has a Data Type mismatch dispite my column is empty.How can i solve as simple as possible as i have many tables to work with and every table's column might give me a mismatch.
View 2 Replies
Sep 5, 2010
I defined a picture column as Image type. Created the Datasource and placed an Image control on a form. When I input the picture of a client in the input form every thing works fine but when I Open a second form (the search form) and try to search for a client with picture I get the following message:Inconvertible type mismatch between SourceColumn 'Picture' of Byte[] and the DataColumn 'Picture' of String
View 2 Replies
Apr 10, 2009
When I use "preview data" for OleDbDataAdapater i got a error "type mismatch in expression".
This is a query generated with VB's "query buider".
[Code].....
View 4 Replies
Dec 27, 2010
I'v designed a ms access database table with one field having Datetime datatype. I can Insert data into it from vb.net front end by trns_dt DateTime.Now.DateBut when I fetch records from the tableand assign the dataset datasource as da, it shows datatype mismatch error.
daleDbDataAdapter("SelectDaily_Transactiondtp_from_dt.value dtp_To.value con)
dsDataSet
[code].....
View 2 Replies
Apr 28, 2012
I have a question. When I try to use this piece of code in my program which will add a supplier to the database, I encounter data type mismatch error. As far as I know, the status of the supplier creates the error.How would I store the values of the radio buttons named radActive and radInactive in the database? Should I use Boolean or a String? I am using Microsoft Access as my database and the field of Status is set to Yes/No.
[Code]...
View 2 Replies
Oct 19, 2011
I'm getting a data type mismatch on this SQL string.
If cmbPayPlan.SelectedIndex = 0 Then
DF = Date.Now.Date.AddDays(30)
ElseIf cmbPayPlan.SelectedIndex = 1 Then
DF = Date.Now.Date.AddDays(60)
[code]....
View 2 Replies
Jul 19, 2010
I have to implement a COM class with VB.NET. An object of this class has then to be created from a VB6 DLL. The code for the COM dll is very simple:
Code:
Public Class AdapterWrapper
Implements SchemaCompInterfaces.IEFAdapter
#Region "COM-GUIDs"
[code]....
Now when I'm running this code, I'm getting the Run-time error '13' Type mismatch in the CreateObject line. Late binding with
Code:
Dim adapter as Object
seems to work for my test code, but is not a solution for me, because I can't change the proprietary VB6 code where the COM object is created. So somehow the interface "SchemaCompInterfaces.IEFAdapter" is not known... :sigh: In the project properties I checked the flag for registration with COM-Interop. Perhaps something to do with the ClassInterface?
View 1 Replies
Aug 22, 2011
im trying to use this select statement on a OLEDB database and im am getting a data type mismatch.[code]its not just this particular select statement. its any where the where clause is dependant. in the past i have got round this by passing in a parameter but its not my prefered method and id really rather not pass in two dates as parameters.i have looked in to this and found some thing that said that in oledb select commands you need to CONVERT the dates however when i trid that i got an error thar says somthing like CONVERT is not a recognised function.
View 5 Replies
