I am creating pivot tables in VB.NET and have run into a problem I did not think would be as difficult as it is turning out. When I create a pivot table it adds in subtotals for each row and I do not want that. In excel you just drag down the subtotals option and tell it to not display subtotals. I looked into the VBA for it and it is several lines long of this format:
I'm trying to generate a pivot table in Excel using VB.NET 2008. I need to bring the data into one tab, and then generate a Pivot on another (i can't do this externally because the data is pulled from a bunch of different places). Currently I'm doing this pivot in the actual code, and then writing to Excel, but it takes up a lot of resource and time and this will make things much easier! I created a sample list below, and I am trying to generate a sample pivot table based on it, but I'm getting errors:
Dim wb As Excel.Workbook Public Sub ExcelGen() Dim ex As New Excel.Application
[code]....
The error I'm getting right now is the no object reference set error on the "pCat =" line...
How to create a pivot table on an Excel spreadsheet via code. The reason I took so long is because I added a reference to the Excel Interop 12.0, rather than the Excel Interop 11.0. I assume that 12.0 is for Excel 2007, while 11.0 if for 2003 (or whatever I have). If that assumption is correct, this will cause me a bit of trouble, as all the people using the program are in the process of moving from 2003 to 2007, and I should have moved myself, but didn't for some reason unknown to me (I thought the upgrade was pushed out to my computer when I was at work, but I don't seem to have it anymore). However, my concern is that the objects needed to create a pivot table in the 12.0 library are significantly different from the objects needed to create a pivot table in the 11.0 library.
I don't believe I can late bind to solve this, because there will need to be different steps taken depending on the version, since the objects have different interfaces. It appears to pertain only to pivot tables (for what I'm doing), as I was able to create the workbook, the worksheets, and export all my data with some old code that I had, and all of that worked with both libraries, the difference is just with the pivot tables because the interfaces have changed, such that the methods needed for one library don't even exist in the other one (and the code crashes, but that's probably because I have the PIAs for 2003 installed, and not 2007).
I want to change the source data for my pivot table in Excel using VB.Net to a named range.
I have : table.ChangePivotCache(wb.PivotCaches.Create(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=sheet.Names("name_of_NamedRange").RefersToRange))
Exception : The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have three tables, the extremely simplified versions of which are:
Practitioners: practitioner_id :: int name :: nvarchar
Insurances: insurance_id :: int name :: nvarchar
InsuranceLink: practitioner_id :: int insurance_id :: int
So, the practitioner table contains a list of practitioners, the insurance table contains a list of insurances, and the link table represents which practitioner supports which insurance. Now, I need to create a view which can display the information like this:
ViewTable: practitioner_id :: int practitioner_name :: nvarchar insurance_1 :: bit insurance_2 :: bit ..... insurance_100 :: bit
In other words, the columns in the view are the ID and name of the practitioner, and every insurance that exists in Insurances (with the insurance name as the column name (there is an enforced condition that insurance names are unique)). The cells in the insurance columns will indicate if that practitioner supports that insurance. Or better yet, is it possible to use an excel-style pivot table on a DataSet in a VB.NET form?
I have built an Access 2007 database with some data stored in it. I have managed to export data using VB2008 from that database to Excel 2007 and have it automatically draw charts based on this data and a query in the Visual Basic Code. One of the results looks like this:
I have a datatable in memory (a flat file, no primary key or relation to other table) and I wish to make a pivot table in Excel out of it. I have been using the Excel COM, so I am hoping that there is a way to do it this way. I have seen code that will put data in a pivot cache via an SQL connection string, but I have yet to find anyway of using a datatable as is.
I have a Microsoft Office Pivot Table 11.0 in my form in Ms Visual Basic .NET 2005. I've already succeed displaying the report. But what I want to do is customizing it. I want to be able to change the dimension or the field of the dimension by clicking a checkbox or something like that. How to do that programmatically ?
I'm on the process of linking my AS2005 cube to VB 2005 using ms pivot table 11.0. However, instead of doing an early binding, I want to code my datasource connection.
I am a new user of Visual Studio 2005. I am looking to create a pivot table for data in my excel spreadsheet using Visual (Basic) Studio 2005. I am getting an error in the following two lines of code, which work fine when I use Visual Basic 6.0 but not with Visual basic that comes with VS 2005. Can anyone let me know why the error occurs and what the correction should be?
I have a table of data in Excel 2003 of which I have managed to automate through a VB.NET application to create a Pivot Table. (Will be doing hundreds of these and therefore cannot just run a macro each time...will put the code in a for loop for each spreadsheet in a directory) My problem is that I am trying to create a pivot chart based on the pivot table.
Some code below....I need to create a pivot chart based on the pivot table below!
Please see bottom edit for where I am currently at I have created a pivot table that works fine when the pivot cache is defined as:
Dim ptCache As Excel.PivotCache = mainHighway.PivotCaches.Add(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=mainHighwayData.Range("a1:v7500"))
My problem is that the number of rows changes from day to day, so I figure out the number of rows in the worksheet and then use that in my pivot cache:
Dim highlRow As Integer highlRow = mainHighwayData.Cells.SpecialCells(XlCellType.xlCellTypeLastCell).Row Dim ptCache As Excel.PivotCache =
[code].....
This returns the proper number for the last row, but once again throws the same type mismatch error.
Edit: I found out another bit of information, but I am not sure what to do with it. The pivot table works fine if the values in it are <= 65536, but the second I increase the range to 65537 I get the type mismatch that has been haunting me. This is true for all numbers >= 65537. I know that 65535 or there abouts used to be the last row in excel, but that is no longer the case. Also when I create the pivot table manually in excel I have no trouble and it has all of the data. I am using int or long, so it should not be an overflow or anything. Anyone have any thoughts on why VB.NET will not let me make a pivot table based on data with more than 65537 rows?
I am getting error "Exception from HRESULT: 0x800A03EC" near (******). can anyone please help me out. i have seen [URL] this blog also but there are also errors in that. can anyone please provide me the correct code for creating a pivot table. The code is,
I'm using EPPlus to create Excel reports. Now i'm trying to create a Pivot with a DateTime PageField, so that the user can filter the period he want to see by himself. But although i can filter this for year,month or days in the according data worksheet by default, i don't get it working in the Pivot.
Here is what i have:
Dim wsPivot = excel.Workbook.Worksheets.Add("Pivot") Dim wsData = excel.Workbook.Worksheets.Add("Data") Dim source = workSheet.GetDataSource
If I have a 32bppBitmap (Bitamp01) which I have reduced the colors to <=256, I then create a new bitmap02 Bitmap02 = New Bitmap(W, H, Imaging.PixelFormat.Format8bppIndexed)
I'm trying to create a pivot table by opening an Excel file from my drive.But I'm receiving the error saying "Object reference not set to an instance of an object".[code]
I have an asp:table which I want to exported to excel. One of my fields are alpha numeric and when exported to excel the leading 0s are stripped off. After going through this thread: Validation (CSS 2.0): 'mso-number-format' is not a known CSS property name I would like to use the css method "mso-number-format:@;.But the css is not exported to excel. I just tried to test it with simpler css things like bold font etc but its not getting carried over. I can see that if I surround my asp:Label with tags this change gets carried over to the excel but not the css bold . Other solutions in other thread does not work for me as ="00111" shows up as desired in excel but in the web form it shows up as ="00111" which is not what i want.
I have software for STOCK and SALES that can give me an Excel price list, I wanna write a small web app that will enable users to check prices, I don't have any access to that software's database, so I wanna import that Excel data (one worksheet, 5 columns, almost 10000 rows) into an MS SQL database table, keep in mind that the price list will change few time a month so I need to re-import that price list once its been updated.
I have an assignment to create a website that people can use to make dinner reservations. We are using Visual Basic code for the forms. It's supposed to keep running totals of each type of dinner. I'm having trouble getting the running totals to not reset to zero. I have them declared outside of the button click event. Not sure where I went wrong. Here's the code:
Option Strict On Partial Class _Default Inherits System.Web.UI.Page
I wish to import an image such as a wheel and rotate it about a pivot point continuously once a button as been activated. Would some kind person wish to share a code snippet in order for this to be achieved?
In my application, I use Vb.Net 2008 with MsAccess..In SQL SERVER, for creating Pivot Tables, I can use the commands: PIVOT and UNPIVOT in SqlServer, for creating them.But, working with Vb and Access, how can I do it?There is some way to create a Pivot Table, by code?
I have 10 Numericupdown boxes in my Form from numericupdown1 to numericupdown10. I would like to instantly display the total amount of all ten numericupdown in a Textbox (textbox1) on the form. I don't want to have to push a button to get the total value of the numericupdown boxes.
