basically I'm sending and receiving both images, strings and files over a client/server connection. I can easily use a protocol for string commands but I cannot distinguish between the incoming data [if data is image or whatever and then follow onward instructions].So how do I make a packet using Dim buffer as byte()?
View 2 RepliesI have a packet that I need to send to a client with an ID of 255. I've had no problems sending packets with IDs of 0, 1, and 2. The ID has to be 255. For some reason, after the translation has happened, both me with my server, and the client, get "63" for any Id greater than 127.
This is the code I am using:
Console.WriteLine(Asc(System.Text.ASCIIEncoding.ASCII.GetString(System.Text.ASCIIEncoding.ASCII.GetBytes(Chr("255")))))
Now, This is an overly complicated version of what the server does. You may consider this a bit unnecessary but the inverse functions performed are for your viewing reasons only.
Where it says "255" is the Packet Id I need sent in the format above. As I said, anything larger than 127 returns "63".
I've been using some code which I found on the net, and have noticed that the first byte is never recieved. Annoyingly, this contains the MAC addresses, which is the bit I want. Below is the relevant snippits:
Public Sub [Start]()
If m_Socket Is Nothing Then
Try
[Code].....
I am having trouble with a socket client application written in vb.net using Visual Studio 2005. The client connects to a C language socket server that is running on OpenVMS. The problem that I have is that when the server sends a packet, the client does not receive the last byte (of every packet!). I can dump the packets on the network and the data is all there. My current solution is to keep my socket messages short (247 bytes) and send one extra byte past the end of my data.
I would like to include more information in my messages and I cannot find a way to make this work. If I knew 100% how long the packets will be on the network, I could work around this by including an extra byte in just the right places. However, I don't want to make any assumptions about the length of the packets.
Here is a sample of my client receive code:
Private Sub ReceiveMsg()
Dim nTotalBytes As Integer
Dim nNumBytes As Integer
[Code]....
I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.
The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.
My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?
[Code].....
I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.
The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.
My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?[code]...
I am concerned that this code is copying bytes into a temporary buffer before writing directly to file.
I feel like there should be some method of copying bytes directly from the tail end of the main buffer directly to file.'this code copies all bytes starting at integer index from the main buffer into a new file: ga.exe
'declare temporary buffer
Dim EXEBytes(bytes.Count - index) As Byte
'copy subset of bytes over, starting at index
System.Buffer.BlockCopy(bytes, index, EXEBytes, 0, bytes.Count - index)
'write bytes from temporary array into file
File.WriteAllBytes(Server.MapPath("/BIN/ga.exe"), EXEBytes)
The relevant code below is not achieving what I hoped it would. I intend for
1. SerialPortBufferTemp to be used as the container for each Serial Port Read.
2. _buffer should contain the resultant array from two separate Reads, the second appended directly after the first.
(E.g. 60 bytes read on the 2nd Read will be appended to the 168 bytes received on the first Read (228 total resultant byte length))
The problem with my code below is that _buffer has increase in size from 300 bytes to 600 bytes, skipped bytes 168 to 300 (leaving them all zeros) and added the remaining 60 bytes from the second read beginning at _buffer[300].
private List<byte> _buffer = new List<byte>();
byte[] SerialPortBufferTemp = new byte[300];
serialPort1.Read(SerialPortBufferTemp, 0, iBytesRead);
if (iValidRecordCtr == 0) {
_buffer.Clear();
[Code] .....
I'm working with the Minecraft Server To Client protocol documentation for a server I am making.It says the packet is 18+ bytes, but I can't seem to figure out what each byte is for.
View 2 RepliesI can't seem to find how to recast a char to Ascii, the VB6 way was to ASC(thechar/thestring).What is the new method? or how to perform the recast while converting to a byte so it will fit and not buffer overrun.
View 10 RepliesI need to make a packet sniffer that will give me SSL packets. It doesn't need to give me any other information than the body of the packet, the actual data being sent to me. It does not need to differentiate between different IP addresses. And, it doesn't even need to differentiate between things which are and are not SSL packets. Any packets will be fine, it just needs to support SSL packets. The fewer lines of code the better...
View 5 Replies[Code]...
This is my code for retrieving pictures, it was working before but then i accidentally deleted the table and i created it again with the same name and same fields. and now whenever i open the form with the picture, there was a message box error. it says Buffer cannot be null. Parameter name: buffer I don't know what i did wrong.
Why does C# define Byte+Byte=Int32 instead of Byte+Byte=Byte like VB?
View 1 RepliesHow do i create a byte array that grows?
Say I create a loop in a new thread and in that loop I using a blocking method to read data from a socket . I receive 255 bytes at a time, until all data has arrived. I want to pop this into one larger byte array after I have received it and whisk it off to somewhere else to do nasty things to it.
Objective: Combine byte arrays, read specific sections, and then cut byte array at specified point.
Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....
I'm not sure if I have this right to begin with because I can't test it without having it completed.
I create my algorthm and its finished but there is a problem, it encrypte all text and all text in a file but after decryption when i open my file (a video file)the player show all information about file(duration,size and ect) currectly but it dont play that my program encrypt and decrypt byte by byte and place a asci code in bytes(0 to 255)
View 12 RepliesI just converted the following code from c# to vb.net. It is functional and works correctly with my company's firmware/devices. My next challenge. Previous serialport code used much more readable structs which where then converted (after building a packet) into byte() automatically as part of the serialport encoding. (this is my understanding)How could I
1. morph byte arrays 'ToSocket' and 'ToMTP' below into structs and
2. convert into byte array for Socket.BeginSend(byte(),.....) to stream out to remote devices?
Imports System.ComponentModel
Imports System.Text
Imports System.Net.Sockets
[Code]....
how to upload file using fileupload control into sql database. I have class where i created insert function and getting info frm the .aspx.vb file
Class File
========
Imports System
Imports System.Data
Imports System.Data.SqlClient
[coe]....
Is it possible in VB to truncate a larger data type ( an int with a value greater than 255) to a smaller one, say a Byte (which only goes up to 255) in a way such that the 8LSBs of the integer are copied to the newly created byte. I have tried this using CType with the following code, however it does not work.
Dim TestByte As Byte = CType(Test, Byte)
Where the variable "Test" is an integer with a value of 419. This code always results in the Overflow exception.
[code].....
I have 2 byte arrays. I want to merge these two byte array into 1 byte array.Usually, I just create a new byte array with length = byte array #1 + byte array #2. Then copy byte array #1 and #2 to the new byte array.do I have more efficient way to merge 2 byte array using VB.NET and .Net 4?
View 2 RepliesI would like to create a function so that I can pass a string and it will return me the binary value, I will use this later in other parts of the script but I am getting an error that I don't understand.
Private Function ConvertToMD5(ByVal OldPassword As String) As Byte
Dim NewPassword As String = ""
'The string we wish to encrypt
[code]....
On the "Return hashedDataBytes I get "Value of type '1-dimensional array of Byte' cannot be converted to 'Byte'"
How could you convert a IntPrt to a Byte Array (Byte()) ?
View 19 RepliesI have a byte array that I convert into a string like so Dim byt As Byte() = New Byte(255) {} s = New String(Encoding.ASCII.GetChars(byte))My question is when I look at the string in a debuger its clearly a normal string but when I compare it to what I know its supposed to be it doesnt equal. So i did a quick check and for some reason its return a string thats the length of 256 characters. So i did a s.trim and it still is 256 characters long.
View 1 RepliesI would like to know how to convert a unisgned byte to signed byte
Atm I got this
a
Function readSignedByte() As SByte
'-128/127
Dim b As SByte
[Code]....
it doesn't work one that well works for numbers positive over 127 if lets say ReadByte() has 128 it would give overflow error which I don't want it to give I would like it to overflow the number to negivate value aka its signed value.
given my code below, I'm trying to figure out how to create an array of 1 byte containing 7 bits. So the byte in the array would contain 0111111 to correspond to mData_Out's boolean values. How would I change the following code? [Code]
View 8 RepliesI am trying to write some code to get a kinect for windows sample running, which is originally written in C#. I get stuck with translating the following C# code to VB.NET:
byte intensity = (byte)(~(realDepth >> 4));
What is the VB.NET equivalent for the code above? how to translate the "~" code sign.
I'm building a simple udp lan chat application in vb.net and I'm wondering how I should split my packets. Each sent packet should have like an id, a username and ip address from where it's coming and maybe also a command part for like join or leave to update my userlist and a text message. I'd like to know what is the easiest way to put all this in a simple packet then easily split and access different parts from it when it's received. thanks.I'm using UDP since this is only in lan so i'm broadcasting to *.*.*.255
What I want to know is what would be the most easy and powerful way to format my packets so they include a username , an id, a command and a text message, then the user receiving it decrypt it to show only the message written by which user or if it's a command like join or leave to show the appropriate message of joining and add the user to the list for exemple.
first question is: Do you need to port-forward anything in order to receive a response?he sake of all that is good and holy, don't use ACCESS, EXCEL, or a TEXT FILE as a database. If you want your program to use a "local database", without any of the hassle of setting up a MS SQL or MySQL server, just click this link: >>> SQLite <<< Seriously. This is for your own good.
View 2 RepliesI am trying to intercept connections on port 2302 that is being used by a game. I was think about using something along the lines of
#Region " Imports "
Imports System
Imports System.IO
Imports System.Windows.Forms
[code]....
I want to create my own pocket editor like WPE because i want to program it.(To send special messages to the game servers when my program receives something.)
View 4 Replies