I have an address in the type 'array of bytes' (example):
81 ?? ?? 02 53 02 d0 27
To mess with it in visual basic, I use the format in Hex:
&H81 &H02 &H53 .....
I do not know what 'put' in relation to the 'question marks' I've tried:
&H??
&H_
&H00
And even leave it blank.
searching through memory at a given address range, and match a string of bytes specified i.e.
FindArrayOfBytes(Byval str as String, Byval range_start As Integer, Byval range_end as Integer) As Integer
The function should return the address start of where the array of bytes was found.
I am writing a scripting language which used .net for execution. Now I have written a function which accepts an object and return a set of numeric values. I wanted user to pass any numeric array (e.g. integer,single,double,long) and I could return values in that format. I mean user can retrieve value in any numeric array type rather than specifying an array type. E.g.
[Code]...
I have a simple problem (I think). I would like to get the CRC of this array of bytes
0x0 0x7E or 0 7E or 0
Anyway the one calculator I use gives me: 78F0 or 78 F0 (Hex). Anyway, I think its CRC16 but im not sure. So if anyway can show me some code to give me a CRC calculation that matches (78 F0 or 78F0), that would be great, Im not sure if you have to include 7E or not
I have a byte array and I need to get 4 bytes from it at a certain location(16) but I don't want to convert it to a integer or anything just keep it as 4 bytes to store in a variable.
View 1 RepliesIn web service I have function that return bytes array. Now, I call it from VbScript and I need to catch result of this function. How I can catch result of this function in value that is gone be like a value that function return (bytes array)?
View 1 RepliesI need to get the bytes from an array of bytes starting at a certain index and for a certain length (4), how can get this? Note: I don't want to use the Array.copy sub as it is not a function.I need to put it in something like Sub MySub([arguement as byte()]the_function_I_Need(Array, index, length))
View 2 RepliesI have a byte array containing bytes from a file(see my last questionnow I want to get the second lot of 4 bytes from the array and convert them to an integersomething like bytearray.get(4[start],4[length])
View 2 RepliesI have a bluetooth pen that I need to send an array of bytes too, can somebody offer advice on how i create an array of bytes for the following:0x68 0x00 0x02 0xFF 0x0A (in the guide this is the array of bytes I need to send)
View 1 RepliesDim sum As Byte
Dim Trans_Array(_64K, 2) As Byte
Const _64K As Integer = 65536
sum = 0
For i = 0 To 15
BinaryStream.Write(Trans_Array(Address + i, RIGHT_FILE))
sum = (Convert.ToByte(sum + Trans_Array(Address + i, RIGHT_FILE)))
Next
I can't figure out how to calculate the checksum of the bytes from array.
I just can't get it to work. I have an array of bytes, read from a png file. I'm trying to write a (very) simple HttpHandler to render the image:
context.Response.AddHeader("Content-Type", "image/png")
context.Response.BinaryWrite(bytes)
context.Response.End()
[Code].....
I use this function to convert file to bytes array:
Public Function ConvertToBytes(ByVal path As String) As Byte()
Dim _tempByte() As Byte = Nothing
If String.IsNullOrEmpty(path) = True Then
Throw New ArgumentNullException("File not exist", path )
Return Nothing
End If
[Code]...
I have a long byte array.I need to eliminate the initial 16 bytes. Is there a shortcut do it?
View 2 RepliesI need some code to calculate the CRC16 of array of bytes.
Example: 00 or 0x0.
The problem I run into is that the CRC I get with a calculator I use is: 78F0.
So 00 = 78F0.
Problem is I dont know what type of CRC16 they are using or anything else. But I would like to make the same calculator in Visual Basic.
Although I think for the Polynum they are using: 0x8408 and I believe the initial value is: 0xFFFF
Here is some code that supposibly is the calculation:
// this function calculates a CRC16 over a unsigned char Array with, LSB first
// @Param1 (DataBuf): An Array, which contains the Data for Calculation
// @Param2 (SizeOfDataBuf): length of the Data Buffer (DataBuf)
[Code].....
unfortunately I cannot resort to C# in my current project, so I'll have to solve this without the unsafe keyword.I've got a bitmap, and I need to access the pixels and channel values directly. I'd like to go beyond Marshal.ReadByte() and Marshal.WriteByte() (and definitely beyond GetPixel and SetPixel).Is there a way to put all the pixel data of the bitmap into a Byte array that works on both 32 and 64 bit systems? I want the exact same layout as the original bitmap, so the padding for each row (if it exists) also needs to be included.Marshal doesn't seem to have something akin to:
byte[] ReadBytes(IntPtr start, int offset, int count)
Unless I totally missed it..
Is it possible convert an array of bytes (PNG format) to image and then, show it in a picture box control?
View 3 RepliesI need to send a structure which contains structure to a socket server but i am abit lost here.Structure example
'example of first structure
structure firstStruct
Dim headerName as u
[code].....
I need to move bytes in byte array.
Dim data() As Byte = {&HE4, &H96, &HA3, &H47, &H42, &H4A, &H80, &H90}
I need to make so that the first two bytes would be deleted and the rest moved to the first one's for example:
Delete: E4, 96
Move: A3 and all the rest to the place where E4 was. (|A3 = 0|,|47 = 1| etc.)
In C++ it's possible to do it like that:
unsigned char data[]={0xE4, 0x96, 0xA3, 0x47, 0x42, 0x4A, 0x80, 0x90};
data+=2;
how to do this in VB.Net without making a new byte array and then using a loop to put the all bytes in that place - it would be too long and would use more resources.
I would like to know if there is any other way than using WriteableBitmap to convert the current screen into array of bytes.Because I am trying to get a screenshot of Esri map, but I am getting "pixel access not allowed" error
View 2 RepliesI have a string of bytes which I am reading from a microcontroller via a serial port which is as follows : 02 10 18 14 CB 73 43 D3 14 00 0D 00 09 00 1B 00 04 B8 3C 00 00 24 00 30 AB
I would like to write some code to place each the bytes into an array with each element of the array consisting of one byte each.
How can I efficiently find the location of the first instance of a four byte sequence within a byte array? Is there something more efficient than looping through the whole array, or a built-in method?
I'm searching through a byte array for a pair of CrLF. I can't convert it to string for an InStr first because I need the position of it in the original byte array.
I am trying to figure out the location of this, as it delimits between a string portion and a binary portion, similar (well, exactly like for this part of it) to an HTTP header. There is a string portion, and two CrLf before the content begins.
When looking at an array of bytes from a stream for a multi-page tiff document, can you determine where one page stops and another begins? I want to take a multi page document, let's say 50 pages and allow a user to pick different pages of that to make other muti-page documents.
View 1 RepliesI need an array and each item in the array is an array of bytes like this , but I'm not sure how to do the :Dim xx as array
xx(0) *as byte* = {&H12, &HFF}
xx(1) *as byte* = {&H45, &HFE}
In vba, There is an address held by a long type which points to a null-terminated string, but I can't find a way to get the string from this address:
long str_address = ...
string str = ?
I want it to do is that you input a string, then you select an algorithm (Theres only going to be one RijnDael) then you input a key, then the Initialization Vector comes from "txtIV.text" then you select the key bytes and the block bytes from the numeric up/down, then you either encrypt or decrypt.
View 1 RepliesOk i am having some issues designing a base-class to handle generics.Caveat is i need to restrict the type put in as a Numeric type, specifically Int16, Int32, or Int64 (Short or Long).I know you can do Of T as {Structure} but i dont want to select the key bytes and the block bytes from the numeric up/down.
View 2 RepliesI have the following code:
Dim ipAdd As IPAddress = Dns.GetHostEntry(strHostname).AddressList(0)
Dim strIP As String = ipAdd.ToString()
When I convert to String instead of an IPv4 address like 192.168.1.0 or similar I get the IPv6 version: fd80::5dbe:5d89:e51b:d313 address. Is there a way I can return the IPv4 address from IPAddress type?
I keep getting a ProtocolViolationException "Bytes to be written to the stream exceed the Content-Length bytes size specified." on the following code.I've tried setting Content-Length numerous ways with no success.
Dim url = "https://domain.com"
Dim req As WebRequest = WebRequest.Create(url)
req.Method = "POST"
req.ContentType = "application/xml"
[Code]...
What exactly does this line do?
i = stream.Read(bytes, 0, bytes.Length)
Does it read the entire message string sent by the client? I have a line to write to the stream later in the code and that does not seem to be sending anything back to the client, although the code around is excuting.
i = stream.Read(bytes, 0, bytes.Length)
While (i <> 0)
Try
' Translate data bytes to a ASCII string.
[code].....
I am using a background worker and am attempting to use the following code. However I keep getting this error on i "Unable to cast object of type 'ObjectCollection' to type 'System.Array'."
Private Sub btnVerify_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnVerify.Click
myArray = listProxies.Items()
BackgroundWorker1.RunWorkerAsync()
End Sub
[code]....