After Referencing DLL - ResolveManifestFiles Task Failed Unexpectedly
Jul 9, 2010
I'm having a problem with a Visual C++ 6.0 DLL that I want to use in my VB.NET (3.5 SP1) project. I'm working with VS2008 on Win7 64bit. When I reference the DLL and build the project I get the following 3 errors:
The "ResolveManifestFiles" task failed unexpectedly.
System.ArgumentException: Illegales Zeichen im Pfad.
bei System.Security.Permissions.FileIOPermission.HasIllegalCharacters(String[] str)
bei System.Security.Permissions.FileIOPermission.AddPathList(FileIOPermissionAccess access,
AccessControlActions control,
[Code] .....
I fail to build project in window7 64 bits. I am using VS 2008. Its working fine at vista 64 bits but when I compiled it at window7 64 bits, I get the following error:
C:WindowsMicrosoft.NETFrameworkv3.5Microsoft.Common.targets(1682,9): error MSB4018: The "GenerateResource" task failed unexpectedly.
C:WindowsMicrosoft.NETFrameworkv3.5Microsoft.Common.targets(1682,9): error MSB4018: System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
before my MS Visual Studio 2010 working normally, but yesterday when i tried to make a new program and when i run the Visual Studio 2010 an error appear about "IntelliTrace.exe has stop working" i just ignore it then the real problem was this; when i put image(s) i always got error but when i remove the image my program runs normally.
is it guaranted that a task A started before TaskB will be completed before task B assuming the task do the same level of operatons?or in other words is there a chance that a task B will finish before tast A in the assumption that the task calls the same procedure?
The site is a buy/sell site and the page the code comes from is the "add product" page.
The problem is that the session("change") becomes nothing by some reason, i cant find any errors.The payment.aspx have a button that sends me back to the page with a session("change"). The reason i see the problem is that i when i try to edit something the category gets restetted to the first in the list. and when i debug i see that the session is nothing, though it should be something
Heres the code:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click If Not stats > 0 Then
Can you write code to tell an event not to fire? Sometimes in my applications events fire unexpectedly. I know this is a broad question, but it must have happened to others out there.
I'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service. The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
I am having an issue with a cookie that keeps getting deleted by the application. When you go into the application, if the cookie does not exist, it gets created. This works fine and everything in the cookie is stored correctly. When I click on a link to go to another page, once everything loads completely, the cookie gets deleted from the file system. Even stranger than that, the values from the cookie remain until the browser is closed. That is the application appears to be retaining the values even though the cookie does not exist on the local file system. The next time you enter the application, the cookie is recreated so any values stored are lost.Now, I have done some tweaking on the code to see what could be causing it. I found that I am adding the cookie to the Response object any time I make a change to the cookie. The cookie is also being added to the Response object when the page load is completed. My initial thought was that adding the cookie multiple times to the Response object could be causing the issue. I commented out the code in the page load complete event and the cookie hung around until the next postback. Then I put in some logic to keep the application from putting the cookie into the Response object more than once, and then I lost the cookie again at the same point as before.All of the code for handling cookies is in my "base page" that all pages inherit from. The page that seems to be loosing the cookie is my search page. I am including the code from both of those pages.[code]
I'm writing a program to help me understand 3d points and how computers manipulate them to 2d. Every time I run the conversion routine in my program the value I passed to it get's manipulated even though I use the ByVal key word. Here is the code in process order , tell me if I missed something here ?
[Code]...
There is a status box for me to check one of the values :> This is the flow of what I have put together so far. The problem is once I run the program everytime I press the up key to make a call to the GetPoints method the value in MyPoint is changed to reflect the forumula in the getpoints method. I explicitly used ByVal in my variables on the method call so the values in the variable would not be manipulated. I've changed it many times but I can't seem to get the method to run where it does the conversion without manipulating the values in MyPoint. I've done similar things in visual basic .net 2003 , Now I am using the visual basic .net 2008 express edition. I don't if there is a difference in the two or some unknown bug.
I'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP.I created a database on my local PC HDD. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service.The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
I have a modal form with a single instance of the built-in .NET 2.0 tab control. The tab control has several pages, and on one of them is a combo box that isn't populated until the user activates it for the first time. When that happens, I handle the DropDown event and run a process that takes several seconds, then I add the items returned by that process to the combo box.It works fine, except right after the list portion of the combo box is dropped down, it immediately closes as if some other control took the focus. I've narrowed it down to the fact that there is a tab control on the form, and the process that retrieves items for the combo box takes more than 4 seconds. If I create a completely blank form with just the combo box, I don't see this behavior.
Needless to say, this is strange beyond belief. Any idea why the tab control would interfere with the control that currently has focus?
BackgroundServer: Windows Server 2003 R2 SP2 Standard x64 (physical server).Executable â.exeâcompiled with Visual Basic 6.0 SP6.The executable is registered on the server with PI.exe /regserveremWe have no idea of what exactly it is that triggers the problem. But after a undefined time/load/operations on the server the registration of the executable is lost or When calling the executable following error message is returned: "Retrieving the COM class factory for component with CLSID {E6A1ECAC-AB5F-4E31-96F5-A0A0CA5EB134} failed due to the following error: 80080005The error is easily fixed with following commands: API.exe /unregserverAPI.exe /regserver
I have an Enum file, as shown in first code block. Though it's first time I use an enum file, so maybe it's not correct to use it like this.. My purpose is just to be able to reference a global parameter from anywhere, so I can just type DataInterval.M1, and it will be treated as an integer... or.. will it not ? urther I have a property in my DataSeries class, of type DataInterval. And in this class I also have a bunch of methods Get/Set etc. to do different work on the dataseries (Inherits List(Of BarData)). roblem: The interval property keeps changing unexpectedly every time the GetNextCloseTime function is called.
''' <summary> ''' "Time Frame" of data series ''' </summary>
I have a modal form that does double duty.When a user wants to add a new object to a database, I open the form blank and they fill it out. When the form closes, all of the data is passed back to my main form and is used to create the new object in the database.When a user wants to edit an existing object, I open the form and pre-populate all of the fields with the object's data.I'm running checks on the form as they edit the fields, only enabling the "OK" button (which will update the database) if the form has actually been changed. If they make a change and then undo it, the "OK" button is reset to Enabled = False.At the bottom of the form are a ComboBox, two buttons and a ListBox. The intent is to allow the user to select an item from the ComboBox and "Add" ("Add" button) to the ListBox, or select an item in the ListBox and "Remove" ("Remove" button) it FROM the ListBox.
This function works fine when the form is loaded blank.When the form is loaded with data, however, (and in the testing I've done, the ListBox has no items in it to start, which is valid), adding an item from the ComboBox to the ListBox causes the Modal form to close with a DialogResult of Cancel.I've tried to trace the source of this issue, but stepping through each line in debug mode gives me no clue as to why this is happening.I COULD remove all of the checks and update the form each time the user presses "OK" (in the case of no changes, the database data would be overwritten with the same data), but that seems kludgy and less elegant. Plus, I'd like this logic to work.
I wrote a custom windows service (VB .Net) to run some processing on data files in the background of one of our servers. The service basically finds the next file to process, breaks it apart and makes a PDF or two - nothing super complicated. It utilizes a timer, if a file is not found, it waits a bit and checks again (repeat indefinitely). The service has run for a week or two with no issues/pausing/stopping. I have plenty of error handling for this and I have not been able to break it... until today.
Whenever I enter text, even a single character, into a textbox in any Form in my application it causes the form and its parent to close. I've checked for the following so far:
Errant/mis-assigned event handlers that may be interpreting a keystroke as a Form cancel I am using keypreview in several windows but debugging shows this to not be a cause Happens in any form of the application Happens even with brand new text boxes dropped on the form Tried removing the WithEvents declaration from text box declarations (VB.NET)
I have a strange problem on one machine that my VB.Net (.NET 3.5 - VS2008) app is running on, it runs a custom sized Powerpoint presentation in an IE control within my VB app. However, on one of the machines my app is installed on, the presentation always pauses on slide 2.
This is a kiosk type app, where there is no user interactivity. On all the other machines running this software, there is no problem. So it must be something related to the machine itself.
The PC is an XP Pro machine and was originally running IE6, which displayed the problem, I ugraded it to IE8 to see if this would fix it, but the problem persists. The machine is running Powerpoint 2003 (don't recommend upgrading the machines OS/Software- this is out of the question, as it is a business spec machine - even getting IE8 installed was a battle!)
The presentation itself has no complexity, all 15 slides are basic text and photos, no animation, no video etc. As far as I can tell, the problem is nothing to do with my software, or the Powerpoint slideshow, as this operates fine on similar machines and reinstalls made no difference, it must be a problem with the machine/installation itself. I've tried running the slideshow on the problem machine, in PowerPoint itself, rather than in my app, and it runs fine. I've also tried running it in an IE window, without running it through my app, and again, it seems fine.
while looping through a short XML file called from xmltextreader retrieved from a webservice, I'm repeatedly getting the error: The request was aborted: The connection was closed unexpectedly. it constantly dies a row or two from completing the parsing.here's my short code:Code:
'Get the principal-id for Group Dim url As String = "https://xxxxx.acrobat.com/api/xml?action=principal-list&session=" & strCookie xmlRead = WebRequestToServer(url) Do While xmlRead.Read If xmlRead.NodeType = XmlNodeType.Element Then If xmlRead.Name = "principal" Then strGroupID = xmlRead.GetAttribute("principal-
I created a typed dataset a day or so ago, then I added a whole bunch of tableadapter/tables with some relationships etc... suddenly out of nowhere it decides my dataset "is not defined". everywhere in my code where i use this dataset now has an error. I tried not to pull out my hair and do a Clean then Rebuild solution... out of nowhere it just refuses to generate code. Object reference not set to an instance of an Object. It would be nice if it was my object so i could find it but it's not.
Curiously I also lost the little database icon on the dataset in the solution explorer.I can still open it in the designer and preview my queries etc... it just wont make the code. it's driving me insane. anyone got a solution?
I have a service made from VB2008. It works fine on my station and on several others. However, on some stations, I get an "Error 1067: The process terminated unexpectedly". The service includes a log writing procedure in the OnStart event but the service crashes before even getting there. This is really weird because, as I say, the service runs fine on several stations. At the moment, the service is a full-trust app, is set to logon at Local System level and has the following manifest settings:
I created a SQL DB named MainDB.mdf and a small VB 2010 application with some forms and datasets.Everything was working OK until i got a new computer and re-installed Visual Studio 2010 and SQL server 2010 on it. I copied my DB from the old to the new computer and also copied by VB 2010 project to it. I used Windows Authentication to connect to the DB in the old computer and also in the new one, i am using different Windows user account names though.
I was able to connect to the DB in the new computer in the Server Explorer section, i created a new connection string to the DB and i can seed there is data in the tables. When i run my VB 2010 application created in the old computer get error:
"Cannot open database "MainDB" requested by the login. The login failed. Login failed for user 'D630Admin'."
I need to get rid of that error and be able to add/mod/del data from my DB using my VB application as i used to.
I am a self-taught noob and have been given the task of developing someone elses code. I have rebuilt someone elses solution into my dev machine and able to run with some minimal bugs. I don't know where to add an .xls file into my solution
System.IO.FileNotFoundException was unhandled FileName=TestRec.xls Message=Could not find file 'TestRec.xls'.
I have a line of VB code which looks like this : If GroupTagDropDownList.SelectedValue Is "1" Then The system doesn't throw up any errors for it but the statement doesn't appear to work.
I think that the problem must lie in how I've referenced the '1' value - I've tried putting single quotation marks around it but it appears to make no difference at all.
There is definitely a value in the drop down list of value '1' but it doesn't appear to be read at all.
I have been given a .dll file (implemented in C++) that I want to use in my VB.NET application.When I try to add a reference to this dll using Visual Studio I get the following error:A reference to 'path-to-dll' could not be added. Please make sure that the file is accessible, and that it is a valid assembly or COM component.
Based on this error I concluded that I need to register the dll. Since it has been implemented with unmanaged code I tried to use the regsvr32 tool to register it. But when I try to register the dll using this tool I get the following error:Name-Of-DLL was loaded, but the DllRegisterServer entry point was not found. This file cannot be registered. how do I add a reference to this dll in my VB.NET application?If I have to register it, how?
I need to reference a C++ dll from my Java project. The method that I need to expose is actually written in Visual Basic. Is there any way to access the Visual Basic code in C++, so that it can eventually be accessed in the Java project?
I have a java class that is used to for ssl connections to a web server. I have got some of it converted however there are serveral java libraries that i have been unable to figure out how to call or reference in vb.net. First off i'm not even sure if it's possible to reference them. In Java code they look like this:
I'll use the last one for example: I get a "Namespace or type specified in the Imports 'org.xml.sax.SAXExeption' doesn't contain any public member or cannot be found. make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use aliases.
