I know this is probably a simple question but, I have a ASP.NET WebSite not WebApplication and I'm trying to get all of my Web User Controls under the same namespace so that I can register them once inside the web.config file and be done with it. My Question is, How do I do this (put them all under the same namespace and make it the default namespace for that folder)?
View 1 RepliesI would try to make some simple programming with the Shape Controls provided in the Microsoft.VisualBasic.PowerPacks Namespace. I have used this MS site for reference: ms-help://MS.VSCC.v80/MS.VSIPCC.v80/MS.VBPOWERPACKS.v30/dv_vboshapelinecon/html/d43d1807-9313-435f-a09e-3d07c6f9e806.htm. At the top of the form code editor I have added the line "Imports Microsoft.VisualBasic.PowerPacks". Then I have tried to add the rest of the code in different Event procedures, but at the "Dim canvas As New ShapeContainer" and the "Dim theLine As New LineShape" I get the following error message: 'ShapeContainer' is ambiguous in the namespace 'Microsoft.VisualBasic.PowerPacks' (I get the same message regarding the LineShape).
View 3 RepliesI have a problem in VS2010 with a user control i have created, I wonder if this is a known problem and if there is a resolution.
My project has a root namespace of DEV2.MyApp.I have created a user control and dragged it onto my form at design time.In the designer i get an error for that form that goes like this:-
Type DEV2.MyApp.myCtrl is not defined Me.myCtrl = New DEV2.MyApp.myCtrl ()I correct it by removing the namespace DEV2. like follows.Me.myCtrl = New MyApp.myCtrl ()
However, everytime i make an amendment to this form on the designer, the error creeps back. Its really annoying and I dont really want to resort to having to create the control at run time to get around it.
There is newer code in a follow up post. I suggest using the code in the later post rather than the code in this one. You can still read this post though. When designing a user interface, one should be conscious of how many individual controls are required to implement the functionality. In some cases an initial design may begin with many buttons or textboxes (for example) but then further review of
the actual required functionality allows for a reduction in the number of unique controls.
But other times, there isn't a better way (which will still make sense to the user of the application) then to have a series of many repeated controls. So in the cases where one can be certain that the best UI implementation for an application will require the use of multiple copies of a given control, then it often becomes necessary to maintain some method of managing all of those controls at various points
throughout the application. Doing so typically requires that one build up some collection of controls which can then be accessed by index in order to work with any given control; but this can lead to a lot of clutter in the code file which handles these control's events. For instance there will be some kind of collection declaration, some recursive routine to find all of the controls of interest, and then any number of event handler methods with long lists of Handles clauses, or additional code loops to wire up the event handling for each control.
Purpose Since most of this functionality could be considered a requirement regardless of the type of control being managed, or its required functionality, it may make sense to wrap all of the control management functionality into a single class. And since our first requirement is a collection of controls, then a base collection class could be the perfect starting point for our control manager. There are a number of existing thread around this topic, with some recent (at the time of this writing) ones being:[URL]..In this, and related, threads I have posted examples of a simple TextBoxManager and ButtonManager control. But again, with so much similar functionality required regardless of the control being managed, it would be technically possible to create a generic ControlManager(Of T As Control) class which can manage any type of control.
[Code]...
So in summary, one can facilitate managing a large number of user interface controls by building a "control manager" class which both encapsulates the list of control instances, and deals with adding and removing defined event handlers for every control it manages. The generic control manager class itself can be inherited and extended into a more specific class on a per-application basis in order to provide more application-specific functionality. Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
I have some custom user controls in my .net winforms program that do not display correctly when the user has selected larger text size. This setting:
My controls look like this:
Instead of like this:
The bill to area and ship to area are both custom controls. I don't know if this is contributing to the problem but I do have code in each to scale the phone/fax areas to stretch nicely, like this code from the bill to control,
Private Sub panFaxPhone_Resize(sender As Object, e As System.EventArgs) Handles panFaxPhone.Resize
panFax.Width = (panFaxPhone.Width / 2) - 1
panPhone.Width = (panFaxPhone.Width / 2) - 1
panFax.Left = panFaxPhone.Width - panFax.Width
End Sub
How can I get my controls to size correctly while still respecting the users choice for larger text (I don't want to just set the AutoScaleMode to None)? After playing with this for a long time it seems to be a problem with anchors in the child controls. See this below image, the inner black box is the control with its border turned on, the text boxes (like name) are anchored left and right and should stretch to fill the control, but don't.
i have a windows from project and in that project i created a user control lets call itcustombutton1 now i can use that control quite easily either at design time or runtime by creating a new instance of it like
View 1 RepliesHow many controls can I have before I should start looking at user defind controls because of too many controls making my program go slow?
View 4 RepliesI need to read an xml document from a database record into an XDocument object in order for it to be deserialized. So that the deserialization will work, I need to apply a specific namespace to each of the level 1 elements. So XML looks a bit like this:
[Code]...
How do I prevent the blank/empty namespace being added to each child element of the element to which the required namespace has been applied?
Imports System.Windows.Forms
ERROR : 'Namespace' can occur only at file or namespace level
The type or namespace name 'Messaging' does not exist in the namespace 'System' (are you missing an assembly reference?)
View 2 RepliesThis class is located in the namespace Acme.Infrastructure.Interface.A class with the same name EventArgs exists in the System namespace.In another project in my solution I have a class Acme.BusinessModules.MyModule.MyClass.When attempting to use the EventArgs class I have to fully qualify the class name or the compiler thinks I am using the System.EventArgs class.My understanding of namespace resolution was that the compiler would first look for the class in the current namespace, and then its parents. It seems that the compiler checks in System before it checks in sibling namespaces. Is it correct that System is checked before the sibling? Or is this behaviour caused by other issues (Imports order?)?
View 1 RepliesI am getting this error,here is my code.
Public Class Sample2
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)Handles Button1.Click
[Code]....
When I add my user control to a flowlayoutpanel its going left to right even though the flowdirection is set to TopDown
View 3 RepliesI am programmatically adding some custom user controls to a PlaceHolder which I have on a simple aspx page. All of the user controls Postback's work correctly except for one which has a Gridview on it.
For some reason any postback that gets fired from within this control, does not call the specified event on the first click, however all future clicks it will work fine. I have no idea why this is the case, but many solutions I have found, suggest adding an ID to the ascx User Control, however this doesn't work in my case.
I've taken a look at the source file for the page that gets generated before and after the first click, javascript used for calling the postback changes, i.e
Before first click: onclick="javascript:__doPostBack('tmpControlID$sgvPrimaryEmploymentHistory','Select$0')"
After first click:
[Code]....
Again, nothing overly complicated. The USERCONTROLNAME is just a const with the value "tmpControlID" in it.
The control that is giving me trouble is a little complicated, I was originally using a custom GridView control that we have created, but have removed it and replaced it with the standard asp one to see if the problem still occurs, and it does.
Any button, on control which fires off a postback will fail the first time, and all future click will work correctly. On the first click the Page_Load event will get called, but that is it.
I am looking for some information on how to properly implement data binding on a user created control. My UserControl contains a Textbox, a Button, and a MonthCalendar. I am able to databind to the Textbox inside of my user control, however, I want to implement the databinding on the UserControl itself, and not reference to textbox inside the control. I have attempted to set a Property as follows:
[Code].....
Ok so i have a program that when you click a button it creates a picturebox were ever you want it well how do i save all the pictureboxes created and load them back in on load?
View 1 RepliesIn the application I'm actually building, I'm dealing with two dynamically-added controls that need to interact with each other, but I've reduced the problem to an as-simple-as-I-can-make-it example with the controls being statically loaded, and it still presents the same problem: a NullReferenceException when invoking the delegate. Here's the gist:
Control 1
Partial Class Control1
Inherits System.Web.UI.UserContr
[code].....
I have created a User Defined Control that contains Add, Save, Edit, Search, Delete & Close Buttons. I added this User Defined Control in a New Form & How can I call Add, Save, EditSearch, Delete & Close Buttons of User Defined Controls from the New Form. What is the Code for calling a button of User Defined Controls from its Parent form?
View 2 RepliesI have a user control in which there are some controls. Now when I bind the usercontrol to db and show it in a panel (dock fill) it shows some odd behaviour like contols are painting one by one and this is looking odd.Can anyone please tell me how to fix these type of issues.
View 2 RepliesI have a couple user controls that are loaded by a Select Case statement. However, in the behind code file for the main page that loads these controls, none of the asp controls show up in intellisense. I had a feeling it's because the controls are loaded conditionally. My question is what is the best way to solve this?
1) Load the controls and do a Select Case in the behind code to make them hidden or not.
2) Is there a way to say (psuedocode): LoadUserControl("UserControl1").Controls("tbTest").Text = ""
3) How can I pass a dataset to the User Control file?
4) Any other ideas?[code]
i'm adding some user controls to my form but when i debug my project VS 2010 send me this error The variable 'xxx' is either undeclared or was never assigned what does that mean??(and its actually declared in the designer code)
View 3 RepliesI want to build my first user control using VB.NET 2008 Express. This control would simply inherit the ComboBox and use some event handlers to do an intelligent auto-complete function. When it's finished, I naturally want the control available in the toolbox so I can add it to forms in design mode.Is there a good tutorial on how to do this with VB.NET 2008 Express? Should I create this as a stand-alone project or as part of the first project where I will use it?
View 7 RepliesI have been set a project from school to design snake in VB.Net but i am struggling to dynamically add the user control which acts as one of the dots in the body of the snake. Every time i add a dot on to the snake the previous vanishes. I assume this is due to me overwriting the previous one by creating a new instance of the object but i cannot find a way of adding a new one in.[code]I have tried using body(i) and other ways of adding a new instance of the object but am stuck.The subroutine will be called up when a new control is needed.
View 1 RepliesI am getting this annoying warning message "Object reference not set to an instance of an object." all the time because I created several custom user controls and drag it to a Windows form in a vb.net Windows application. I am using vs 2005 and dot.net framework v 2.0. This message pop up when I try to save the projector when I try to debug it in the Design mode.
View 2 RepliesMy project, which has 2 user controls in it- does not display the user controls in the toolbox. Has anyone else had this problem, and/or know of a solution?I have tried adding other user controls to the project, they do not appear in the toolbox.I have tried creating a new project, and it's user controls DO show up in the toolbox. If I add the user controls from the first project to the new project -THEY show up in the toolbox for that project.So it must be something tweaked out with the project right?
View 14 RepliesI'm to .NET and all the associated cool stuff you can do, but am wondering about efficiency with User Controls and JS includes.
My user controls are mainly made up with an ascx display page and .vb.ascx code behind, as is customary with the code-behind coding style of .NET, which is great for coding simplicity although it does double then bear of files required. However, as I understand it, the server compiles these and returns the HTML efficiently.
Where the Control requires JavaScript, as I'm developing, I am making external JS files for each User Control with the same name, so the user controls consist of 'controlName.ascx, controlName.vb.ascx, controlName.js'
If a page requested by the user contains several User Controls the browser will be requesting multiple JS files, probably a master page JS file, jQuery AND each required file for the respective Controls.
This approach makes sense to me whilst developing and as everything's all kept nice and neat, making problem solving easy, but when it goes live there'll be loads of get requests from the browser, given that each time the browser gets a file, even the process of requesting the file to check if its cached or not must take some time.
Would I be best off including my JS inline in the ascx files, or code behind, directly inserting the script, or what is the 'correct' way to handle these multiple files to reduce get requests from the browser.
I'm using CSS sprites for buttons and stuff for the same reason, so wondering what to do with JS files. In my case CSS is generally handled by classes in the primary pages, so these are not an issue.
This is an odd question but can I load custom controls from a directory? (e.g TestControl.dll) in my application at runtime instead of adding a com reference?The reason I am asking is that I have an application that is installed as an add-in for MS office. The entire interface is a panel that contains a user control. Initial installation is a bit involved so after the first install, I would like to use clickOnce to deploy updates by just supplying new user controls.
View 8 RepliesIn my asp.net 4.0 application I have a standard set of tabs controls across the application that has one tab for Search, one for View and one for Reporting.I am in the process of updating those tabs and I was hoping to be able to wrap their functionality up into a single user control since they all function in pretty much similar ways. The issue I am having is how to create a property called SeacrhTab/ViewTab/ReportTab that allows me to assign a different user control to it depending on the area of the application (e.g. CompanySearchControl, ContactSearchControl, etc.) Anyone ever tried to accomplish something similar?
View 2 RepliesI'm having a bit of a problem with the web application I'm currently working on. In it there are a few Web User Controls that we use to display information on a bunch of different pages. They seem to compile alright and arent showing up any errors. The problem is trying to register them on other pages to access them is returning a 'file not found' error in visual studio (2005). I have them defined like this:
<%@ Register TagPrefix="cc2" TagName="ControlSelector" Src="~/components/controls/ControlSelector.ascx" %>
The strange thing is that when I remove the '~' from the front no error is shown but the path beomes ~//components/controls/ControlSelector.ascx when looking at the designer and obviously it cant find the control anyway.
I made a custom control for my form. It's basically a custom button I made using a label.The only problem is, when I apply a myButton_Click event to the control in my main form, it will only be triggered if the control itself is clicked. The label takes up the entire form (it's docked inside it). The click event isn't triggered when the control (virtually the label) is clicked. You must click behind the label (the form's background) for the event to be triggered. How can I pass the myButton_Click event to the label so it is triggered when the label is clicked? I hope I'm making sense.
View 9 Replies