Background Worker Combox Cross-thread Error
May 19, 2010Can someone tell me how to get the selected text in the combo as it encountered cross-thread in the following code:
[Code]...
Can someone tell me how to get the selected text in the combo as it encountered cross-thread in the following code:
[Code]...
I am testing a background workder. I am running the following code for the test.
Private Sub bgwTest_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles bgwTest.DoWork
Dim a As Integer = 0
Do While a < 10 'Infinite loop
ComboBox1.Items.Add(1)
[Code] .....
But this code generates the following error:
"Cross-thread operation not valid: Control 'ComboBox1' accessed from a thread other than the thread it was created on."
how to put this on a background worker without getting cross thread errors??? trying to upload a childform object values to an access db.I don't work in IT,Our company's LAN so slow that it takes around 3~5 seconds trying to update/insert values in access using the code below so putting it on a background worker i think makes the app immediately usable once save/upload's called unless otherwise somebody could suggest a faster way to speed things up.[code]
View 2 RepliesI'm getting a Cross-thread operation not valid error when my label text changes - this is very strange because it was working up until yesterday.The only way I can get this to work is by applying the invoke..[code]Is there a more simpler solution or will I have to invoke all my label coding?
View 9 RepliesIn one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
I have a BackgroundWorkerThread which I want to use serially.So some of the code in the UI thread will look like this [code]But of course I can't do the second RunWorkerAsync until the UI thread has seen the RunWorkerCompleted event indicating that the "Sequences" work has been completed (or somehow knows that the "Sequences" work has been completed).So I need some sort of synchronization between the two RunWorkerAsync calls, but whatever I use cannot hang up the UI thread because it has to be able to handle ProgressChanged events.Maybe the RunWorkerCompleted event could make the second call but I really don't like that structure.So how do I delay the second call to RunWorkerAsync (for the "Templates" work) until the background thread has completed the "Sequences" work?
View 6 RepliesI have searched the forum and found several forums related to the backgroundworker thread but have been unsuccessful in finding my answer.My objective is to display an animated gif or progress bar while the program is executing a particular method which can take upwards of several minutes to complete. I cannot get the second thread to run the progress bar while the main progrem is executing the time consuming method. I have created a demo based on another thread and can't seem to get it to create two threads. I was attempting to get the backgroundworker to execute the progress bar while my main code runs on UI thread.
[Code]...
I have a application which processes 1000's datas.. for each processing it needs to update gui and db and many variables in my application. So what i have planned is to use 50~90 background worker with my own algorithm of thread pool, synchronization and thread close.So here is it efficient in terms of memory and performance. just confused what to use.. backgroundworker componenet or standard thread.
View 11 RepliesI'm working on a web application that uses the web browser control to get and set info from my website. The content on the site is pulled from different pages and the data the application stores becomes really huge so i used a background worker to do the work and keep the form responsive. On each loop i call to get the webbrowser's inner html so i can sort through it and grab what i need and it works; but only the first time!? After i call it the first time and try to call it again to update the variables the function hangs and then the console shows me a Thread Abort Exception, The try statement i used to contain it doesn't fire off an exception. When i debug the program and i get to that function, it hangs and then just stops working.
The function that loops:
vb.net
Dim ids As String = GrabIDs()
Dim IDCount As Long = ids.Split(CChar(",")).Length - 1
Do Until IDCount = 0
[Code]....
I use background worker almost daily and works great. Today I came to an instance though where I needed to put my background worker in a separate project then the one I was running because I needed to use this class in two different projects in my solution. When I tested the coding on a winforms form, it works perfectly, handling my coding on the background thread. When I try to reference this class from an external project, all of my coding seems to run just fine, but it does not appear to be doing anything on a background thread as it should be, causing my main window to lockup.
Is there any way around this / what is the best practice for ASYNC calls in an external class.Note I basically created a class that u call start, and an event fires when data is ready, so it's not like my external project is waiting for the method to complete.
Solution ABC has two projects. Project A and Project B. Project A is my WPF application and B is my DLL doing the work. Inside project A I have
Dim SmartCardData as new Solution.B()
SmartCardData.Start()
Project B has a sub
[code]....
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
I have some class that splits some work onto multiple worker threads. To be more specific: the class represents a download, that can have as many segments as the user wants, that get then put onto separate threads.When I run the download with one segment, it works fine. When I run it with 2 segments, the second segment encounters an error.[code]When I put a breakpoint on the if, it'll stop there, but when I go to the next line, I get an error.I don't get what's getting wrong, and got a headache after a few hours of attempting to keep track of the correct thread.Anyone an idea what's going wrong, or how I can detect it better? (This is the first time I'm doing real multi threading debugging.
View 4 RepliesI am trying to interface with excel in a vb.net windows app I am writting. Basically it imports csv files to a data table, adds some additional data from with a oledb datasource, creates a view to sort the data before pushing back in to a datatable and spitting it out to a listview. The list view then allows you to further filter and sort the data (or will do shortly but thats not an issue).From the data in the list there are then 2 options, it will either create individual reports for managers in a excel sheet, which it colour bands based on a total field and then emails out to the managers. This works fine.
The other feature is that it produces a summary report that goes to a central email account. Again it creates an excel workbook, adds 4 work sheets, copies all the data to a master sheet (sheet1), it then starts at the bottom of the master worksheet andcopies the total values from the total row for each employee and copies this value in to the next blank column. (This is basically used so I can determine based on the 3 score bandings which sheet each line should go on. The lines for an employee are madeup of individual leave lines and total line that has the summation of the individual lines for them).
Private Sub Button6_Click(sender As System.Object, e As System.EventArgs) Handles Button6.Click
If btState = False Then
[code].....
I have a windows application that need to process som quite time consuming jobs. In my first try i did all processing under
the form thread. The result was bad response and update of the form due to the heavy jobs.To get around the problem with bad response from the form i created a new class "processing" where i put all the data processing. Then i instanciated a background worker where i in the "doWork" sub created a new instance of "processing".The "processing" class creates a timer from system.timer, and the timer drives the processing.On the Timer event Elapsed the timer starts a new thread from the thread pool.
My problem is now when i want to asynchronously close the background worker (with the corresponding function call what ever it is called ...) there is still a timer thread out there that causes exceptions for me.
1. How can i close my background worker and at the same time have the timer to be stopped?
2. Is there a way to synchronize the timer event so that the timer executes from the background worker thread?
3. Is there a better approach for me to adapt?
I am having a problem that I keep getting the following error when I try to run my program.I am trying to make a circle the size of the value of FrameSize.A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
This is the details of the error:
System.InvalidOperationException was unhandled
Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on.
Source=DreamCatcher[code]......
I'm trying to do a basic function, I'm using Visual Basic 2008 express, I have a windows form with 1 textbox, 1 button and a serial port. When the button is pressed serialport1 is opened then the data received is trimmed to remove unwanted char from start and end and then is displayed in the textbox, when the button is pressed again the port is closed, this works fine but in debug mode I get a cross thread error, telling me I can't use textbox1.text=result
[Code]...
I'm doing my first multithread attempt and I get an error that says "Cross-thread operation not valid..."
Code:
Private Sub btnProcess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProcess.Click
Dim thrMyThread As New System.Threading.Thread( _
AddressOf displayProgress)
thrMyThread.Start()
[Code] .....
cross thread operation is not valid. error is coming?I have two buttons one for showing the panel of split container and another for hide.The error is coming in do work event but only for hiding the panel of split container?
View 4 RepliesVS-2010 i have an application that works great from the visual studio ide on x86 systems(projects build x86) but when i try to run the app from visual studio on my x64 system i get "Cross-thread operation not valid: Control 'gridHistory' accessed from a thread other than the thread it was created on."
main line 58 and 59 are below
dim listform as flist = new flist
Application.Run(listForm)
[code]....
I googled about this error, i found that you need a delegate to go around it, but I dont understand. Here's a Screenshot. Do I need to attach my code too?
View 4 RepliesCross Thread Calld Invalid.txt?
View 1 RepliesI'm trying to do a basic function, I'm using Visual Basic 2008 express, I have a windows form with 1 textbox, 1 button and a serial port. When the button is pressed serialport1 is opened then the data received is trimmed to remove unwanted char from start and end and then is displayed in the textbox, when the button is pressed again the port is closed, this works fine but in debug mode I get a cross thread error, telling me I can't use textbox1.text=result
[Code]...
How can I mod this code to get rid of the error?? It's been suggested to me to use BeginInvoke or Invoke but i'm not sure how to use this can someone
I'm trying to set the text of a ToolStripStatusLabel in a form, wich contains some ToolStripStatusLabels, a ListBox and a button. I'm setting the text from a BackgroundWorker wich is started from a timer. I thought this would be okay. Well, the problem is that sometimes it works, and suddenly after a while, I get a cross-thread error wich says:
"Cross-thread operation not valid: Control 'ListBox1' accessed from a thread other than the thread it was created on"
Well, where did the ListBox get involved in this problem? The code breaks on this line:
ToolStripStatusLabel3.Text = "Henter data fra eTime-basen..."
So, what am I missing here? I've never encountered this before in any way. I'm only using the ListBox later in my BackgrounWorker, and each time I'm using it I'm checking the InvokeRequired-property to avoid problems with threading.
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
I'm learning VB.NET coming from a VB6 and Java background.In my app, I've got a function that validates the fields on a form. All it is doing is reading them, not updating. I've searched and see info about the backgroundWorker class, but all the examples are about updating the fields.I understand the idea of threading and how it works, but have never written code that spawned threads myself. I've always let the language handle it. It seems like a lot of work that I would have to write a sub using the backgroundWorker for every time I wanted to read or update each field. The couple of books I've got that introduce you to the language show you reading or updating the field directly.How do I know what threads are running other than writing the code like I'm used to then running through debugger to figure out what variables are on which thread?
View 2 RepliesThe error occurs at: For i As Integer = 0 To txt_load.Lines.Count - 1..The project exists of 2 rtb's. One with a list of lines. The other will be filled with the converted lines. The main reason that I use it is that I want to use the app during the conversion. The second is that I want to learn how this works.[code]
View 9 RepliesI'm using a background worker to read a XML file and do stuff in a database i get nothing in debugger but when i run it i get this error... how can i find out where and what is wrong? Exception has been thrown by the target of an invocation.
View 6 RepliesI have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.