I am writing a CSV File from a Database. I am stuck in writing lines which become greater then 1024 bytes collectively. It write line terminator after 1024 bytes and thus adds the remaining string to new line which obviously results what I don't want. Is there any way so that I increase the line length limit to some reasonable amount of bytes?
View 16 RepliesWhat exactly does this line do?
i = stream.Read(bytes, 0, bytes.Length)
Does it read the entire message string sent by the client? I have a line to write to the stream later in the code and that does not seem to be sending anything back to the client, although the code around is excuting.
i = stream.Read(bytes, 0, bytes.Length)
While (i <> 0)
Try
' Translate data bytes to a ASCII string.
[code].....
I have 10 parts of a file. Each part is 10,000 bytes.Now say I receive these parts out of order meaning I cannot simply just write them in order as I receive them, but I am able to detect what part it is.
If I received part 3 how would I write those bytes in the 20,000-30,000 byte section of a file?
I'm still trying to write a text file using input value from textbox growth line by line...it mean everytime i keep in teh value in text box...it will write into textfile in new line... how to rename my text file by current date?...
View 2 RepliesI have a bit of javascript that i use and often have to edit, then redo changes etc. So for a little project i wanted to let vb edit the script.
Code
Dim Script As String = String.Format(StealthScriptLocation)
Dim ScriptsContents As New List(Of String)
Using sr As New IO.StreamReader(Script)
[code]....
how do i delete a line?link where i can get a list of chars for when i need to write them in a string.
document.title = ""
obviously wont write?
How to write some value in certain line in ini file??Below is my code..
WritePrivateProfileString("UsefulBih", "MEDIA", "MYRC010,MYRD010,MYRC050,MYRF050,MYRC100,MYRC050,MYRF050,MYRF010,MYRF020,MYRF100", "c:ih.ini")
I created a text file contains 4 bytes of data
AABBCCDD
I just want to read the first 2 bytes (AABB) to execute it with my program.
Then I'll need to read the last 2 bytes (CCDD) for another computer routines
I'm having a bit of a play with .NET CF 3.5 and I'm going insane trying to figure out how to write a line of text to a file...I've seen the System.IO.StreamWriter function but I dont know if thats what I want, or if its relevant to what I'm trying to do.
View 9 Replieshow to write more than one employee to this file with my code. I had a for loop in there but it just placed the second person I entered into it twice rather than the 1st then 2nd person.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'gets the file name through an input box
[Code].....
I need to know how to write multiline .txt file without losing that text which is already in that file.
My.Computer.FileSystem.WriteAllText works well but I dont know how to add linesif its even possible with this.[code]...
i have text file like this
| From | To | From | To
------|--|------|---------------|---------------|-------|-------|-------|-------
1.0 30 Blue (2 15.00 28.0) [2 14.54 31.8] 94611 16275 88926 13049
1.0 30 Blue (2 15.00 29.0) [2 14.82 31.4] 93111 16275 89446 15049
[code]....
I want to add this line
"Length|Ga|Color |(b r c )|(b r c )| X Y | X Y" below the line " | From | To | From | To"
so that my text file look like this
| From | To | From | To
Length|Ga|Color |(b r c )|(b r c )| X Y | X Y
------|--|------|---------------|---------------|-------|-------|-------|-------
[code]....
I want to write a line into a text/.cfg file. The line is = name "ishtiak". I need a sapce between name & "ishtiak". The text "ishtiak" is loading from a textbox called textbox1. I dont want in the text box my name like this "ishtiak" it will be without "" like this ishtiak
but in the text file it will add "" before & after my name.
So the question is
1. How to add space between name & "ishtiak"? like this = name "ishtiak"
2. My textbox text will be ishtiak,but it will be written like this "ishtiak"
Here is My Project Screen & Project Code
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim thefile As String = "C:append.cfg"
Dim lines() As String = System.IO.File.ReadAllLines("C:append.cfg")
lines(4) = "name" & TextBox1.Text
System.IO.File.WriteAllLines("C:append.cfg", lines)
End Sub
How can I open a text file, find a certain word in the text file, and then, just before that word, write a line of text to the file - then save the file?
View 4 RepliesI have a block of HTML which I want to write to a file. It contains about 30 lines and it's difficult to escape all the double-quotes in individual WriteLine statements. In PERL, I can do something like the following to write inline HTML and print everything upto <<OUTFILE to outfile as-is, is that possible in VB .Net 2008?
print <OUTFILE
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>GSC Signature</TITLE>
<META content="text/html; charset=windows-1252" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 9.00.7930.16406"></HEAD>
<BODY><<OUTFILE
I could save the HTML in a template file and copy it into a new file each time, but that's not very flexible.
i need to code a program to help me in my everyday job, i own my own business and this will help me with my sales. its a very simple program, and i cant figure out how to get my multiple textboxes to write to a new .txt file. i can only get it to do 1 line at a time. I have textboxes. named txtDate, txtCarrier, txtLocation, txtDateEmpty, txtDestination, txtQuote, txtPhone, txtFax, txtEmail.I want the "txtDate" textbox to be autofilled with the current date and time of the user input, which is started on the next textbox.the rest of the textboxes are going to be user input. then when the user is done entering data into the multiple textbox's they would click a button "add" or something to that sort.then those text box entries including the "txtDate" would be written to a new .txt file.in this format, Quote"Date - Carrier - Location - DateEmpty - Destination - Quote - Phone - Fax - Email "all on the same line.and when the "add" button is clicked, the multiple textbox fields clear all the data previously entered.and is ready for another user input.
after the 2nd set of user input is entered, and "add" button is pressed,it would add(append) another line to same txt file previously written. example: Quote"Date - Carrier - Location - DateEmpty - Destination - Quote - Phone - Fax - Email " "Date2 - Carrier2 - Location2 - DateEmpty2 - Destination2 - Quote2 - Phone2 - Fax2 - Email2 "
then the previously filled text boxes would be empty again, and ready for input 3. and with this you would be able to add countless lines over and over of user input.ok, also when the program launchesI want a msg txt box to pop up and ask. "Where is the Load Origin?" then the user would input data and click enterAnother Msg box would pop up and ask "Where is the Destination?"Next "Pick Up Date" then "Deliver Date" and last would be "Notes" and all that data that was entered into the msg box's will Be at the top of the txt file like a header .
[code]...
I have two part in text file. Let say Part 1 and part 2. I want to write part2 in different file and part 1 in different file.
View 5 RepliesIm currently making a program and I was really thinking about adding a simple hex editor into it (nothing really fancy). I know how to read/write/view bytes already but im stuck on how i will make the interface and stuff. Ive been searching google for hours and i cant find anything.
View 12 RepliesI am trying to write and read bytes from usb device.I have an array dout(8) of boolean say f,t,t,f,t,t,f,t representing switch states.I need to convert that to a variable DataOut as byte. 01101101 Later I read the usb device.This gives me a variable Data as byte 10110100 I need to convert that to an array DIn(10) of boolean t,f,t,t,f,t,f,f All my code attempts have failed.
View 2 RepliesI receive the irc messages like this [code]...
This show the empty space where it auto-scrolls to when writing the received string to the console.
This shows the actual received message (a bit edited with time, etc ...)
I would like to read an HTML file, search each line to see if it starts with </head>. Then add the centering code after it. That line at destination file should read:
</head><table border="0" cellpadding="0" cellspacing="2" width="760"align="center"><tr><td>
After this I don't care to search for anything. Just read from source and write to destination. I know there are programs out there to find/replace text in series of files but I am not allowed to use external programs.
I have the below code that take a txt file as input and write the nodes of the tree at the end of the line.
[Code]...
how to write a null bytes onto unused hard disk spaces? I understand that files deleted are still existed on hard disk, I am thinking of may be if I write the null bytes to every single unused bytes so that the unused hard disk space would be become all null bytes, and unused space would no longer contain of those deleted files.
View 9 RepliesI have this code that was working in a proof of concept app I had - but now will not work.
For Each ddfile As String In ddfiles Dim MyThread As Thread ' simple new thread Dim newFS As FSObject = New FSObject() 'new FSObject which is a file object I made up' used because i needed to keep the name and index matched so the callback function had something to work with
[Code]...
I've already used arrays and a random number to generate a sentence with the pattern KLAC, but I need to write this to a text document and then do it again. I have succeeded to write the first sentence, but the second will not register.This represents essentially everything I've tried. (I haven't included the arrays because they're pretty long.)
repeat:
Dim rndNo As New Random()
Dim chosen_aword = aword(rndNo.Next(0, aword.Length))
[code]......
I am reading a pot that has a range of 1000 to -887.I need to convert that numeric value to represent 0 to 1024Where 1000=0 and -887 = 1024.
View 4 Replieswhat i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
I want to create a form with size91024*1600).when i give value (greater than screen size) these size values form automatically set values the maximum size of screen.So when i work my laptop it size is very small.because i want to attach many component in a form.(with form scroll bar).
View 1 RepliesI want it to do is that you input a string, then you select an algorithm (Theres only going to be one RijnDael) then you input a key, then the Initialization Vector comes from "txtIV.text" then you select the key bytes and the block bytes from the numeric up/down, then you either encrypt or decrypt.
View 1 RepliesOk i am having some issues designing a base-class to handle generics.Caveat is i need to restrict the type put in as a Numeric type, specifically Int16, Int32, or Int64 (Short or Long).I know you can do Of T as {Structure} but i dont want to select the key bytes and the block bytes from the numeric up/down.
View 2 RepliesI keep getting a ProtocolViolationException "Bytes to be written to the stream exceed the Content-Length bytes size specified." on the following code.I've tried setting Content-Length numerous ways with no success.
Dim url = "https://domain.com"
Dim req As WebRequest = WebRequest.Create(url)
req.Method = "POST"
req.ContentType = "application/xml"
[Code]...