I want to make a program that can make:
1.) check if a character is in a text file
2.) if the character exist then convert the character into binary code
3.) display the result in a textbox.
Here is my code:
' s is my txt.file
' in this code i want to check if char "g" is the in the txt.file
If InStr(1, s, "g") > 0 Then
[Code].....
Can a LINQ or a LAMBDA expression be used to count the 1's in a binary string ?For example, if I convert a number to its BINARY using.>>
Dim binaryString As String = Convert.ToString( numberVariable, 2 )
1) Without using a loop such as a FOR NEXT loop, can I count the number of 1's in the STRING using LINQ or a LAMBDA expression?
2) Can I get the indexes of where the 1's are at in a collection such as a LIST using LINQ or a LAMBDA expression?I know the syntax of some LINQ expressions, however, I don't know which method may be suitable.
I have a string of ASCII in HEX. ( 5A65726f)so first i split them into 2s >>>> 5A 65 72 6f then i change the hex to integer using these integer i convert them to char using chr() it did the job great, i can see the correct word i want..but it give me an error saying " make sure it has the right format" ( error shown below)
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim hexnum As String
Dim converttohex As String
Dim hextonum As Integer
[code]....
i thought it was the for loop problem...since i will go up to 7 while len(hexnum) is 8 so it would loop again but there is nothing after 8th HEX?so i tried For i = 1 To Len(hexnum)-1 Step 2 ...this time...textbox didnt show anything...+ the same error came up...
My application is reading in data from the serial port. The packet format uses 1 byte to tell the data length. The problem is as I am reading each byte in as a char when I try to get the value of the received character (using Asc(cRxd)) it only works up to values of 127, any bytes received that are over 127 are received as 63. I noticed that this was the default parity replace value, but I have parity.none set and I also changed the parity replace value. The received byte is always 63. I have tried reading the data using .ReadByte but this gives the same result - only works on values below 128.
View 1 RepliesI get this result for "select GETDATE()"
2009-04-22 23:09:02.590
What is the best way to convert the datetime to only char like below?
20090422230902590
I am writing a database and need to post a value in a lable to a sql field.the sql datatype is set to money.when posting i have
CMD.Parameters.addwithValue("@Claim", LBCLAIM.text)
when posting i gett an error
cannot convert a char vaule to money. the char vaule has incorrect syntax.
I want to convert say Input: textbox1.text=blabla Output: blabla becomes into: textbox2.text=(char45 & char34 char45 & char34 char45 & char64 )
[code]...
I've been trying to figure this out for hours now, and I've given up on trying to solve it myself. Basically what I need to do, is convert a "double octet" binary string, such as "11010011 01011101", into a byte or char type if possible.I use the following code to convert my Unicode text into binary:
Private Function ByteToStr(ByVal bt() As Byte) As String
Dim st As New StringBuilder
For Each byt As Byte In bt
[code]....
But that gives me weird results. The "Convert.FromBase64String" obviously isn't what I'm after. Any help would be great. If I can convert the "binary string" into a bytes or chars I can get it into a string.
I've been trying to figure this out for hours now, and I've given up on trying to solve it myself. Basically what I need to do, is convert a "double octet" binary string, such as "11010011 01011101", into a byte or char type if possible. I use the following code to convert my Unicode text into binary:
[Code]...
I'm making a function that sends a string to a Handle using sendmessage , and I need to convert a Char to a virtual KeyCode. Asc and AscW returns ASCII code's which don't work.
View 2 Replieshow do you convert from char to keys?
View 3 RepliesI'm trying to insert data into a table but I get the error "Cannot convert char value to money. The char value has incorrect syntax". Here is my
[Code]...
convert char to ascii in array form?.asci[a]but a is char array.i need a syntax for it.
Admin Note: all the communication on the forums.
is there any way to convert chinese characters to pinyin?i searched google and this is the nearest result that i found[URL]..HttpUtility.HtmlEncode(Text);
but it requires .net framework 4 if i'm not wrong.
currently i am using .net framework 3.5. is there any other way or web service that i can use?
how can i, for example add a datum from the rs232 with other variable here is my code:
Dim ii As Byte
Dim c(100) As Char
c = Me.SerialPort1.ReadExisting()
[Code]....
I am need of help. I need to know how to convert Binary to BCD in VB 2005 C++.
View 1 RepliesHow do I convert this file (Attached) to a readable text file (its XML code).I found code here and there but doesnt work. I want to grab the whole file and dump it back out as readable text.
View 10 RepliesHow do I convert hex and integers to binary?
View 5 RepliesI have created in Visual Studio 2008 a Form with two buttons, a PictureBox and a TextBox. I've made the first button to load an image from my hard disk and I want to make the second button to convert the image into binary code and show the string in the TextBox. Image format is Jpeg. Here's the code for the first button:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click PictureBox1.Image = Image.FromFile("D:\Pa.Pei\Pa.Pei. - Ergasies\4o Έτος\Ανάλυση Εικόνας\011.jpg")
[Code]...
how to convert integer to binaryexample: 1 to 00012 to 0010
View 8 RepliesI've used .NET for a long time now but I have come across something I haven't had to do before and I'm struggling to work it out. What I need to do is work with binary numbers and convert them to decimals and vice versa but not necessarily using even numbers e.g. I would like to represent a number between 0 and 2047 which can be represented with 11 binary digits. Plus I want to represent a second number between 0 and 500000 which can be represented with 19 binary digits, and a third number, fourth etc. Then I want to string the whole binary results together and split it in to sections of lets say 5 bits each and convert those back to decimal.
[Code]...
I need to convert a Short to his binary equivalent. For example:Dim x As Short = 20480 And then I need a method to get the binary thingy, which in this case is: 101000000000000
I searched for a answer using google, but I couldn't find a proper explanaition.
Id like to create a simple program consisting two textboxes and a button, "whats the point i hear you ask?" simple, id like to be able to enter in a string into the first textbox, press the button and then have it converted into binary and displayed into the second textbox.
View 1 RepliesI got to a snag recently in the program. I know exactly what is going wrong, and I know exactly what will fix it. However, I do not know how to code what I need.
Code:
'a function to determine whether the pokemon is shiny
Function SHINY(ByVal data() As Byte, ByVal IDnumber As Integer, ByVal SIDnumber As Integer)
[Code].....
So as you can see, I need to convert a binary string into an integer so it will work properly. Everything else is fine, I've tested it out a lot and done a lot of debugging, even manually, and I'm sure everything will work. All I need is the code to convert it.
convert binary image to jpg or png one.i've saved some types of images in my database but now i want to display them but i can't do it
View 1 Repliesconverting an image file into binary text in VB 2010.I am working on a compression program and need to see the actual binary as text. I have code for converting text files to binary and it works fine but, need to attempt files with greater randomness that are typically uncompressable.(JPG's) I understand that the file conversions may be huge. I plan on manipulating the binary in smaller manageable chunks.
View 1 RepliesIs there an easy way to do this in .NET.I see the Convert.ToXXXX, but no Convert.ToBinaryString.
View 2 RepliesI need to convert PDF files to Binary strings, the resulting string looks like this"JVBERi0xLjQNJeLjz9MNCjI1IDAgb2JqDTw8L0xpbm...."
I have a program that pulls all the PDF files in a directory, and reads using Binary Reader, but I am not getting the results I need.[code]...
How can i convert a string to binary (8-Bit Binary to be specific) in vb.net?Dim ThnkU as ThankYouNote ThnkU.note="Thanks for your help" ThnkU.Name="Dustin_K" Dim PS as string = "Mark my post
View 4 RepliesHow? I am willing to make a text to binary to text converter, but how can i convert text to binary?
View 1 Replies