I am writing a database and need to post a value in a lable to a sql field.the sql datatype is set to money.when posting i have
CMD.Parameters.addwithValue("@Claim", LBCLAIM.text)
when posting i gett an error
cannot convert a char vaule to money. the char vaule has incorrect syntax.
I want to convert say Input: textbox1.text=blabla Output: blabla becomes into: textbox2.text=(char45 & char34 char45 & char34 char45 & char64 )
[code]...
i want to read a character 1 by 1 from a string and a .txt, i know all about stream reader so for the .txt would it be somthing like:textbox1.text = tr.readCharacter.i would prefer to be able to read from a textbox or String array though.
View 10 RepliesI need validation for string to comply with next: no space char starts with one delimiter char ends with one delimiter char has no other char as delimiter char. Updated sorry missed that should only be one delimiter char at start and at the end
View 2 RepliesI have a string of ASCII in HEX. ( 5A65726f)so first i split them into 2s >>>> 5A 65 72 6f then i change the hex to integer using these integer i convert them to char using chr() it did the job great, i can see the correct word i want..but it give me an error saying " make sure it has the right format" ( error shown below)
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim hexnum As String
Dim converttohex As String
Dim hextonum As Integer
[code]....
i thought it was the for loop problem...since i will go up to 7 while len(hexnum) is 8 so it would loop again but there is nothing after 8th HEX?so i tried For i = 1 To Len(hexnum)-1 Step 2 ...this time...textbox didnt show anything...+ the same error came up...
I want to make a program that can make:
1.) check if a character is in a text file
2.) if the character exist then convert the character into binary code
3.) display the result in a textbox.
Here is my code:
' s is my txt.file
' in this code i want to check if char "g" is the in the txt.file
If InStr(1, s, "g") > 0 Then
[Code].....
My application is reading in data from the serial port. The packet format uses 1 byte to tell the data length. The problem is as I am reading each byte in as a char when I try to get the value of the received character (using Asc(cRxd)) it only works up to values of 127, any bytes received that are over 127 are received as 63. I noticed that this was the default parity replace value, but I have parity.none set and I also changed the parity replace value. The received byte is always 63. I have tried reading the data using .ReadByte but this gives the same result - only works on values below 128.
View 1 RepliesI get this result for "select GETDATE()"
2009-04-22 23:09:02.590
What is the best way to convert the datetime to only char like below?
20090422230902590
I'm making a function that sends a string to a Handle using sendmessage , and I need to convert a Char to a virtual KeyCode. Asc and AscW returns ASCII code's which don't work.
View 2 Replieshow do you convert from char to keys?
View 3 RepliesI'm trying to insert data into a table but I get the error "Cannot convert char value to money. The char value has incorrect syntax". Here is my
[Code]...
convert char to ascii in array form?.asci[a]but a is char array.i need a syntax for it.
Admin Note: all the communication on the forums.
is there any way to convert chinese characters to pinyin?i searched google and this is the nearest result that i found[URL]..HttpUtility.HtmlEncode(Text);
but it requires .net framework 4 if i'm not wrong.
currently i am using .net framework 3.5. is there any other way or web service that i can use?
I am trying to the copy the value from string to char array using String.CopyTo() method.
Here's my code
Dim strString As String = "Hello World!"
Dim strCopy(12) As Char
strString.CopyTo(0, strCopy, 0, 12)
[code]....
Edit : I get the this error at runtime.ArgumentOutOfRangeException Index and count must refer to a location within the string. Parameter name: sourceIndex
how can i, for example add a datum from the rs232 with other variable here is my code:
Dim ii As Byte
Dim c(100) As Char
c = Me.SerialPort1.ReadExisting()
[Code]....
I have a DLL that I am importing:Declare Function QueryInfo Lib "mydllname" (ByVal DevName As String, ByVal pcQueryParam As String, ByVal Result As String, ByVal Length As Int32) As Int32
[Code]...
Anyone have an idea what the issue could be? If I run similar code in VB6 (only diff is mtStatus = String(mtValueSize, Chr$(0)) ) it returns what I expect.
I have built a DataTable from my database. Then I am looping through the rows and trying to access a string, however the value is being returned as each character in the string.
For Each theseRows In DisplayForm.MainTab.Rows
If theseRows.Item("Last_Name") = userLast And theseRows.Item("First_Name") = userFirst Then
[Code]....
The Trap_Code values are two or three letter strings, the returned value is each letter once at a time. The loop seems to cycle through the individual characters of the string as an array rather than display the entire value, which is what I was hoping for.
The following code:
If checkboxList.Items(i).Selected Then
.Fields("DESC1").Value += checkboxList.Items(i).Text + ", "
End If
should produce output such as "A, B, C,(space)", which will then be bound to a dynamically created GridView. I would like to remove the last two-char string, that is ",(space)". How can I do this?
how can I cut the 1st 3 char in a string in vb 2008?
For example:
Dim i As String = "ABCDEF";
I want to only cut the 1st 3 char and the system will only display "ABC" after the 'cut' action done.
Im wanting to create a function that receives a string and moves the first letter to the end and returns it.
Public Function moveLetters(ByRef word As String) As String
Dim length As Integer = word.Length
Dim chars(length) As Char
[code]....
what is the best way to remove FileFinder1 from this string:
"C:Program FilesFileFinder1"
Basically the first letter of a string must be a certain letter. At the moment the only way I know how to do it is as follows:
If sConsignmentNo(0) = "J" Or sConsignmentNo(0) = "C" Or sConsignmentNo(0) = "U" Or sConsignmentNo(0) = "N" Or sConsignmentNo(0) = "H" Or sConsignmentNo(0) = "S" Or sConsignmentNo(0) = "V" Then
Basically listening the same thing out over and over. Is there a way I can say, If sConsignmentNo(0) = ListOfValidEntries i.e J,C,U,N etc?
Using Visual Basic 2008 and cant use regex!
I have written my own function, which in C would be declared like this, using standard Win32 calling conventions:int Thing( char * command, char * buffer, int * BufSize);I have the following amount of VB figured out, which should import the dll and call this function, wrapping it up to make it easy to call Thing("CommandHere",GetDataBackHere).UPDATE:This code is now a working solution, as shown here:
Imports Microsoft.VisualBasic
Imports System.Runtime.InteropServices
Imports System
Imports System.Text
[Code]...
Updates: I got the code to build by following the help received here, and then I had forgot the As Return Type (which got me a MarshalDirectiveException PInvokeRestriction). Then I had an assertion failure inside my DLL, which lead to an SEHException. Once fixed, this works BEAUTIFULLY. There are newsgroups where people are saying this can not be done, that VB only loads managed dll assemblies (which I guess is the normal thing most VB users are used to).
I have a string like this.
Dim str As String = "code"
I need to break this string down to an array of characters like this,
{"c", "o", "d", "e"}
How can I do this?
I have a string that goes like "abcdefg..."
I would like to find the index where the letter d is at, so I can get the number 3.
I managed to do it by looping through each letter in the string, but that doesn't sound very convenient.
Function to test first char of string
View 9 Repliesmy question is how can i check a string for a specific char (for example, in the string:"242.421" theres the char "." how can i make a rule so that char can only be typed once... (in a textbox) so when a user click the "." button on their keyboard it won't allow it again (more than once)
View 5 RepliesHello all, im now trying to create a way to replace the last char of a string with "4"[code]....
View 7 RepliesI want to replace a char at a specified index of a string.
Short of using the .Remove and .Insert methods I was wondering if there is an easier way.[code]...
I want to split a string with this array of char
Dim sepa As String = " '"",.;:(){}[]·#|-_<>+¿?=/&%$‚¬@!¡"
The question is how do I include in this string vbcrlf? So I can do the fallowing:
dim palabras as String() = RichTextBox1.Text.ToString().Split(sepa)
I tried:
Dim sepa As String = " '"",.;:(){}[]·#|-_<>+¿?=/&%$‚¬@!¡\r\n"
But it does not work.
