Custom Controls Disposing & Memory?
Apr 14, 2010
I've been working on a few large custom controls, and I noticed that when I use them, my memory starts ballooning. If I add a control at runtime, it increases the memory, but when I remove the control, it decreases less than it increased. However, it would stop balooning at some higher value. So if go back in forth between pages (which adds and removes the control), the memory would look something like this:
1,000K|5,000K|4,000K|9,000K|8,000K... 20,000K|25,000K|21,000K|25,000K|21,000K|25,000K... etc I know it takes a while for the GC to run, but the memory would stay consistantly high for long periods of time.
I tried writing a Closing routine, where when I called it, the control looped trhough its children and disposed all the internal controls, which seemed to help a little, but the memory after running the control and disposing was still much higher than before running the control. I also use custom event addhandlers. Should I remove all these as well. It would be nice if I received a little guidance on this.
View 2 Replies
ADVERTISEMENT
Mar 4, 2012
Previous in my app, I've created dynamic controls and and named them blah0, blah1, blah2 etc. There will be a different amount created each time the user runs the app.I'm now trying to delete all of the controls but doing something very wrong. I've got the following
dim checkboxes = Controls.OfType(Of CheckBox).AsQueryable()
dim sPrefix as string = "blah"
for each checknum as checkbox in checkboxes
[code]....
When I execute the above, it only gets rid of every second control and I have no idea why. If I swap the dispose with a msgbox, the msgbox appears every time as I'd expect. It would seem that disposing of a checkbox seems to somehow requery the number available?
View 13 Replies
Oct 1, 2010
Our application uses a custom DataAccessLayer class almost exclusively, and within that we do use Data Access Application Block (currently version 2). We are getting the infamous "GetOrdinal" error sporadically. We are not using out-of-method connections. We are using DAAB version 2. Below is a typical example of our DAL methods:
Public Function MyDALMethod(ByVal Param1 As Integer, ByVal Param2 As Integer) As System.Data.IDataReader
Dim db As Database = DatabaseFactory.CreateDatabase()
[Code].....
My main question is should these DAL references be disposed somehow? It's a custom class written in VB.NET, so it doesn't implement IDisposable so I'm not sure if there's anything to be done or not, but we do have errors and issues (like the GetOrdinal problem) which seem to be load-related, and I'm wondering if this is part of the problem.
View 1 Replies
Jan 18, 2012
For my applications I created a class to produce custom cursors. One of them is a waitcursor with a percentage in it. It has several backgrounds each one with a filled circle on it and they are positioned in a circle it self (a bit like the java wait thingy). Since I put it in my application I started to get errors at different places in my code, but all related to some memmory problems.
[Code]...
View 1 Replies
May 6, 2009
I have an VB.NET application that you can feed in using a file or other means a bunch of Website URL's and using six Web Browser Controls launched on separate threads navigate to and then images are captured. Almost instantly the Working Set Size accelerates to 1GB and continually rises as the process progresses until it flat out exhausts memory, of course it's a memory leak.
While watching the Performance monitor CLR managed memory is reasonably low and is being managed properly "cleaned up" as you would expect - Gen0,1,2 are reasonably empty. BUT non managed NET storage is out of control. So my question is: Web Browser controls are NET ActiveX objects... is storage ever allocated for them outside of CLR? And since they are really components of IE does their usage somehow require IE to generate and allocate storage outside of CLR. That is to say using a Web Browser control is just an API for the real the IE full browser and that does allocate storage in a non CLR managed address space.
View 2 Replies
May 29, 2011
I have started with a small project in VB2008 Express which grew to a complex application. I have deployed the application recently discovering it is rather small, and the major issue is that code-generated controls (checkboxes, comboboxes, textboxes) are not displayed as during development. I have declared the code-generated controls in the declaration region, and there are about 250 controls. According to user selection some of the controls are added to a container panel. Now, I am concern that because I declare those as public (static?) variables, it uses much memory and causes the problem in the compiled application. Is that correct that static declared and code-generated controls uses much memory? How to avoid it ? I need the controls as public variables. Is it better to add all 250 controls on the form in designer mode, and use the property Visible (control.visible=True)?
View 1 Replies
Feb 15, 2012
I have created an application which creates multiple webbrowser controls at runtime...now i want to clean up memory when these webrowsers are deleted see the code how can i do it(i have tried dispose method but no luck)
Creation on dynamic web browsers on button click
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
View 6 Replies
Mar 27, 2010
i want to control my tab pages with custom buttons...now i want to hide my tabs from tab controls...
View 2 Replies
Aug 1, 2010
I want to know how to add custom controls to vb.net.
View 6 Replies
Dec 9, 2011
in VB.NET i have 2 custom controls, one is a TextBox and second one is a ComboBox.These have custom values like Bool _IsHidden and are added on runtime to a form.Now, at some point in the code I want to check if the _IsHidden is set to True or False and display that information. Since the user can edit this values when creating the control these are not set on creation.
So what I tried is:(all of this is on MDI Forms)
For Each frm as CustomForm in Main.MdiChildren If frm.MyName = calledBy Then 'this part is just to know which form called the form to create the object For Each cntrl as CustomTextBox in frm.Controls'DO Something
Next End if Next
Now.. if the first control is a custom ComboBox it thorws an error since it sees that it does not match the custom TextBox control..how do i get around this? By my understanding it should just go through all of the controls on the said form and just check those who match CustomTextBox control ?
View 2 Replies
Nov 24, 2011
I've created custom buttons in a .dll and they work fine, so I thought I'd have a go at creating my own sort of listbox to replace the standard one in my applications. It's basically a panel with a few labels and a button (eliminating the need to select an item in standard listbox then click a seperate button). I want to add these panels to a panel on a form, at run-time, based on rows in a db.
If I try adding any arguments in the New() section of the class file it won't let me use the panel in my toolbox. Is there a way to pass arguments to custom controls, I need a new custom panel for each row in a db so need to pass an id to it to specify records; or even load the records in my application and create a new panel for each record, using info passed to it to fill in the labels on it. Or can I create the panel at run-time and refer to labels within the custom controls, setting their .text properties that way?
View 5 Replies
Mar 19, 2011
I would like to expand my knowledge of VB.NET and was looking at creating custom user interfaces or custom controls. The type of things I am thinking of is: [URL]s. How are those controls created? I imagine it involves using the existing controls in Visual Studio as a starting point, and altering them to suit your design?
View 2 Replies
Dec 10, 2010
I'm not going to post my code for my transparentlistbox class, but here is a link to it.It's been working fine as is, until early this morning when I tried to set a different size.[URl]..For the longest time I placed a normal listbox control on a form and resized that, setting a new public variable of transparentlistbox to the same size/location as the original listbox, setting the visibility of the original to false, and adding the transparentlistbox to the form (me.controls.add).It looked like this:
[Code]...
Now, since I've moved some buttons around on my main form, I resized the original listbox control to be wider (same height though). When I tested, the transparentlistbox (code didn't change still set to original listbox size/location), the size was that of what I had the original listbox set to, before resizing?
So, I commented out all of the custom drawing/paint events/etc I could find for the transparentlistbox and tested, still stuck to the original size. I stepped line by line debugging and verified that transparentlistbox1.size=listbox1.size indeed matched the new resized size (but didn't actually resize)?
Last I did was comment out the transparentlistbox.visible and put back the listbox1.visible and listbox1 does indeed show with the new resized size? I'm not quite sure what to test next?
View 2 Replies
Nov 3, 2009
Is there a way to use SVG in vb.net to draw custom controls? Or any other way?
View 3 Replies
Jun 19, 2012
Is it possible to have a custom control (inherits from Control) and add sub-controls to it (like, a label for example)? Basically I want a composite control. I know controls can contain other controls, but if I try to add a control to MyBase.Controls, this doesn't work because that's readonly.
[Code]...
View 2 Replies
Oct 14, 2011
i need to create custom controls for my apps so how can I do that? Do I need a special software to do that?
View 3 Replies
Jan 16, 2012
inherit from two classes in VB.net?We are developing Custom User Controls that inherits from say System.Web.UI.WebControls.Label. We are planning on implementing a bunch of these controls but they will share mostly the same additional properties. We are hopeful about centralising these properties.I have looked into interfaces but it seems they only 'contract' properties you need to implement.
View 2 Replies
Dec 2, 2009
I am new to VB 2008 having spent most of my time in 2003. What is the recommendation for the best place to get a primer on creating custom controls in VB.NET. I prefer to use VB directly and not the WPF.
View 2 Replies
Nov 3, 2011
I have a custom control I'm creating. When I click on it, it draws a dotted border and puts some nubs on it for resizing. This all works perfectly. Now I want it so when I click off of it, it deselects. I already have a variable to set up if it's selected or not and subs to draw/clear it. I just have to be able to detect when something else is selected or it gets clicked off of.
What I've Tried
My first and best solution to this was to use the LostFocus event, but, by custom control apparently won't let it fire. After some research, as far as I know, custom controls don't have Focus events because they are custom and could be changed (basically, you have to implement the focus events yourself).
My Question
Does anybody have a solution to either implement the focus events or a way to handle off clicking for custom controls?
Sources
Here is my controls current source:
Imports System.Drawing.Drawing2D
Public Class wDOMElement
Inherits Control
[Code]....
View 1 Replies
May 12, 2010
I am getting this annoying warning message "Object reference not set to an instance of an object." all the time because I created several custom user controls and drag it to a Windows form in a vb.net Windows application. I am using vs 2005 and dot.net framework v 2.0. This message pop up when I try to save the projector when I try to debug it in the Design mode.
View 2 Replies
Nov 16, 2009
Is this possible? Must be surely but I've tried and come up short. I've created a very basic class (person) with 2 public properties, forename, surname. My user control is databound to this class and has 2 textboxes to store the properties.
I've built the control and can add the user control to a windows form but how can I add to a new user control (Staff) which will show my 2 existing textboxes and I can add dateJoined datepicker also??
View 6 Replies
Dec 4, 2009
I have created a customised checkbox control (only the text and border appearance has been modified), and wanted to loop through them in a User quizto see which have been checked and are correct. I have used the Tag property (set to 1 or 0) to identify incorrect answers, and tried to loop through with the following code:For Each thing As GMAW.MyCheckBox In currentParent.ActiveMdiChild.Controls
View 7 Replies
Aug 6, 2009
I have some custom controls in a specific project. I want to make these controls available to ALL my projects. How do I do this?
View 5 Replies
Jun 23, 2010
I got a third party control from a website after googling.Inorder to use that control, I simply right-clicked the Toolbox and selected "Choose Item". Then Browse to that dll file location and selected that file.Now it is added to the toolbox. But do I have to register the dll now ? Or, will it work when I distribute my app ?
View 6 Replies
Aug 23, 2010
I got this whole thing pretty well down (it's actually quite easy), but I've seen custom controls created where you can click that little arrow on the top-right corner and add things or change things about it.
How exactly is this done? I'd Google it (which is why you don't see me post here too often) but I really don't know how to describe it.
View 1 Replies
Aug 24, 2009
I currently do all development work in VB.NET 2008, winforms; but within 18 months will be switching to WPF (for better or worse). I have had great success using Matthew MacDonald's "Pro NET 2.0 Windows Forms and Custom Controls in VB 2005" book. This is an excellent reference focused entirely on the development of custom controls in windows forms. ( Many of the controls that I use have to have a very specific UI look and feel, so they end up being custom.
I'm looking for pretty much the exact same thing, except focused on WPF. MacDonald has a new book coming out on WPF in general ,but not on custom controls. Books are my preferred reference material, but any good web references.
View 1 Replies
Feb 1, 2011
I am trying to learn how to create Windows Forms custom controls in VB.Net by creating a .Net version of an old control I created in VB6. On this control, I have a UserControl with a Label (lblCaption), and several of the properties I add to the control should be passed to the label.This is the code I tried for the ForeColor property:
Code:
Protected mcolForeColor As Color = Color.FromKnownColor(KnownColor.ButtonHighlight)
Public Overrides Property ForeColor() As Color
Get
[code]....
When I change the ForeColor on the control in my test project, lblCaption does change to the color I selected; however, when I run the application, the label changes back to the default (button highlight) color, and the value of the property is also reverted back when I return to the form designer.What would be the proper way to implement the ForeColor property on a custom control?
View 4 Replies
Feb 27, 2009
I need to know how to make Custom Windows Controls?
View 2 Replies
Jul 27, 2009
For some reason one of my controls produces the following excecption error when adding to the VS ToolBox:Request for the permission of type System.Security.Permissions.SecurityPermissions, mscorlib, Verion=2.0.0.0, Culture=neutral etcWe have identified it is this class within the Custom Control but we not sure whyit is erroring
View 2 Replies
Dec 6, 2011
I have a form named VBProject It has two TextBoxes and one custom control named MyControl which is created in another project.MyControl's project has a form inside, named Form3. When My control is loaded it needs to find all controls in my VBProject and add them into a listbox which is in Form3. Then Show the Form3. In the end ListView need to shows name and text of textboxes but it shows nothing. Here are my codes:
MyControl's Load_Event:
Dim i As Integer = 0
MessageBox.Show("Control Count:" + Me.Controls.Count.ToString)
For Each MyObject In Me.Controls
If TypeOf MyObject Is TextBox Then
[code]...
View 1 Replies
