Resizing And Custom Controls?
Dec 10, 2010
I'm not going to post my code for my transparentlistbox class, but here is a link to it.It's been working fine as is, until early this morning when I tried to set a different size.[URl]..For the longest time I placed a normal listbox control on a form and resized that, setting a new public variable of transparentlistbox to the same size/location as the original listbox, setting the visibility of the original to false, and adding the transparentlistbox to the form (me.controls.add).It looked like this:
[Code]...
Now, since I've moved some buttons around on my main form, I resized the original listbox control to be wider (same height though). When I tested, the transparentlistbox (code didn't change still set to original listbox size/location), the size was that of what I had the original listbox set to, before resizing?
So, I commented out all of the custom drawing/paint events/etc I could find for the transparentlistbox and tested, still stuck to the original size. I stepped line by line debugging and verified that transparentlistbox1.size=listbox1.size indeed matched the new resized size (but didn't actually resize)?
Last I did was comment out the transparentlistbox.visible and put back the listbox1.visible and listbox1 does indeed show with the new resized size? I'm not quite sure what to test next?
View 2 Replies
ADVERTISEMENT
May 14, 2011
ok so im making a custom windows border. ive got it all layed out and it is working greatbut im trying to make it so that the image in the bottom left corner will be click and thenheld and when the mouse move the
View 1 Replies
Sep 3, 2011
I've been programming a Fisheye-panel that holds image and make it behave like the icondock in Mac Os X. But now i have a problem. When i add to many item, i want them to shirk, to make room for more, or grow when i remove icons. This is the behavior i get: When i want them to grow, they don't grow at all. When i want them to shrink, they shrink, but leaves lots of empty space (like replacing a photo from a frame with a smaller photo. The image shrink, but not the frame)
[Code]...
View 8 Replies
Sep 6, 2009
I have a listbox and a panel. In my forms resize event, my listbox is always form1.width * 0.5 and then the panel is also, but it doesnt work very well. They overlap at a certain point but in theory, they never should. Is there something wrong with my logic?
View 1 Replies
Feb 12, 2011
we all know how to dock or anchor controls so that they resize themselves accordingly when a form is resized. It works fine till we have rows of controls on left and right size of the form. But what if have three columns (Columns as in visual sense. I'm not talking about any column control containing other controls) of controls? For example a form having a bunch of controls in the left side, a bunch in the middle and a bunch in the right. There may be a few more bunches in the middle. Now while resizing the form, I want the controls to resize accordingly as well as change their positions to make space for the previous bunch of controls that are resizing.
I mean, while the user increases the form size horizontally, the controls of the second bunch should resize and at the same time they should move right because the controls of the first bunch are increasing horizontally too. When the user decreases the form size horizontally the same thing should occur in the reverse order. I can manage it somehow using nested split-containers but that's too cumbersome. I would like to know if there's some better way to achieve it, like setting some property etc.?
View 2 Replies
Oct 28, 2009
I have developed a application in vb.net(2005). I need to resize a form with others controls when I dragging or resizing from size.
View 2 Replies
Jan 18, 2010
I have a windows form with a groupBox and several controls ( textboxes, checkboxes, one grid, labels ) in the groupBox. I want to make the form resizable , such that the controls would resize themselves when the form is resized instead of overlapping each other.I tried docking and anchoring in several ways, but I am not able to achieve this.
View 2 Replies
Apr 2, 2012
Custom control, based on ProgressBar, in design mode, resizing to larger casues VS to crash, resizing to smaller is fine. The error from the MsgBox is Parameter not valid. The line that is reported at fault is 'rRect(i) = New RectangleF(rPoints(i), rSize)'.The function below is called indirectly from 'Protected Overrides Sub OnPaint(ByVal e As PaintEventArgs)'
Private Function GetRoundPath(ByVal r As RectangleF) As GraphicsPath
Dim rPath As New GraphicsPath
Dim rPoints(4) As PointF[code]......
View 11 Replies
Oct 18, 2011
I have two controls inside a user control. They are set to be anchored left and right in order too size with the window as it changes size. For some reason I'm having tons of issues getting this to work properly.
Particularly, when ever I build the project and the control reloads itself, these controls triple in size, and extend way off the control. If I re size them and repeat the process it happens again! Anyone have this issue or know what might cause it?
View 1 Replies
Jun 17, 2011
I have a basic windows form. I have one command button of the default size right in the middle of the form. I also set the anchors for the command button to keep it in the center when the window form is resized.The issue is when I maximize the the window form the command button remains in the center, but it has grown in size tremendously (almost taking up the entire form).I want to keep the command button centered when the form is maximized, but I also want to keep it the same size. Is there a property for the command button I am overlooking which will do this?
View 1 Replies
Jul 24, 2009
I have two DataGridView controls, with three buttons in between them vertically, in a VB 2005 form that need to be resized and moved around on a form resize.
The code below works, and does what I want. It takes the difference between the new size and the default size, splits the height difference between the two DataGridViews, and moves things around correctly.
What bugs me about it is that I've hard-coded the defaults into the ResizeEnd handler. How would I go about passing the default size so that I don't repeat myself?
Even better, is there a way to do it with anchoring, docking, and other stuff, so that I don't even need to write code?
Private Sub dlgShowAssets_ResizeEnd(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.ResizeEnd
Dim defaultWindowSize As New System.Drawing.Size(759, 619)
[Code]....
View 1 Replies
Dec 23, 2010
I have a form that sits on the user's desktop. It's only purpose is to display specific information about the computer. The layout is basically setup like this:
[Code]...
I want to be able to give the user the option to display whatever data they choose. In doing so, I'd like the form to resize itself based on the how many labels are in the form and for the labels to align vertically.
Can anyone point me in the right direction? For the form, I was thinking I could get the location of the last label and offset it's size by the location, or something similar.
View 2 Replies
Nov 25, 2010
i'm attempting to develop a calendar using datagridview where column headers are dates and row headers are list of employees.
i would like to add a button/custom control on the datagridview to represent a task over time where I can move or resize at runtime.
View 4 Replies
May 31, 2011
I have a development system and two test systems. My development system is Windows 7 (64 bit). My two test systems are Windows XP (x86) and Windows 7 (x86). I have created a program on the development system mostly in VB.NET 2008 and deployed it. It looks nice on the development system and on my Windows XP system, but when executing the software on my Windows 7 (x86) system, all the form sizes and components somehow grow. To investigate the issue, I moved over the entire project and opened it on the Windows 7 (x86) system to find that the sizes have somehow changed in the designer there as well. I opened up the .Designer.vb files and the sizes there all seem correct. Then I go to the IDE and the sizes are larger than they should be. For example, I will set a form size to 532, 217 on my development PC then it will show up as 709, 267 on the test system. I tried putting in code on my form.load event to set the size to 532, 217 then re-deployed it, but again, it executes and the form is too large.
View 4 Replies
Sep 17, 2009
I have a project running in my old computer. It has panels,textboxes,labels etc. It occupies the full screen when running.I bought a new computer with a widescreen format. When I run this project it only occupies 2/3 of the screen.
What properties of the controls must I use so that I can run this program in any size computer and still occupy the full screen i.e the size is proportionately resized depending on screen size.
View 3 Replies
Feb 14, 2012
I have a code method that I wrote in vb6 that works on every screensize and resolution combo...however vb.net is not letting me do this. Here is what I do. upon form load at program startup I gather all of the data of the controls (height,width,top,left,font
size) prior to the form actually resizing and I store those in a listbox that is not visible. Then when the form resize is called I proportion all of the controls from their old positions versus the new form size.
[Code]...
View 3 Replies
Mar 20, 2011
Where is the best place to resize a control on a form when a form is resized?....I'm currently using the Form1_SizeChanged event and seems to work ok. Also is there any need to check in the forms resize event if the form is in a minimized state before resizing controls?.,.. in VB6 if you try to resize a control when the form is minimized you get an error, but I don't see that happening in BV10 Form1_SizeChanged event, does VB10 automatically ignore resizing controls when a form is minimized or something?
View 2 Replies
May 6, 2012
I have developed a windows application on a size of 1366,768. When i have opened the application on another pc, the location of the controls are not the same anymore. Part of the application can't be displayed as well. How can I handle that in vb?
View 1 Replies
Nov 12, 2009
First off I'm using the Extended Webbrowser control from: [URL]
I use the Webbrowser control to access an ESRI web based mapping solution. When the ESRI map is loaded into an IE browser and the browser is resized then the map control resizing accordingly. When my Webbrowser control is resized the map webpage is not resizing properly.
I don't even know where to start with this problem. Is there some event that's not firing in the website? I can't simply refresh the whole website because the user may have panned and zoomed around. I want to just tell the website that the container control (Webbrowser control) is resizing now.
View 2 Replies
Jul 12, 2010
i have created a windows form that has some labels, lines , buttons and i have enabled autoscroll property to true. i am having trouble with relocating and resizing of the controls with resizing of form and change in screen resolution.i have used a code liike dim tmpctrl as control
for each tmpctrl in me.controls
tmpctrl.setbounds((tmpctrls.location.x/X)*me.width, (tmpctrls.location.y/Y)*me.height, (tmpctrls.size.width/X)*me.width,(tmpctrls.size.height/Y*me.height))
next
now as my form is a scrollable form.and the total window portion with respect to which i want to resize n relocate. m having trouble in choosing X , Y in the above code.
View 5 Replies
Jul 28, 2009
I've got a set of controls in a line inside"FollowTableLayoutPanel1", contained within "TableLayoutPanel2".I have them resizing according to the position of the mouse cursor; the closer the mouse cursor is to the vertical centre of the control, the larger the control is. Because FollowTableLayoutPanel1 has its anchor property set to "Top", it recentres itself in TableLayoutPanel2.It is possible for the recentring of FollowTableLayoutPanel1 to move a control one pixel further away from the mouse pointer, which causes the control to shrink, which causes FollowTableLayoutPanel1 to recentre, placing the control closer to the mouse pointer, which causes the control to grow,which causes FollowTableLayoutPanel1 to recentre, which moves the control further away from the mouse cursor, etc., etc., etc.The end result is that the whole setup judders and wobbles, constantly resizing.Full example code is provided below,and can be pasted directly into Form1 of a new project. Positioning the mouse cursor to correctly show the problem is left as an exercise for the reader :
Public Class Form1
Private Sub myInitializeComponent()
Me.components = New System.ComponentModel.Container
Me.TableLayoutPanel2 = New System.Windows.Forms.TableLayoutPanel[code].....
View 1 Replies
Mar 27, 2010
i want to control my tab pages with custom buttons...now i want to hide my tabs from tab controls...
View 2 Replies
Aug 1, 2010
I want to know how to add custom controls to vb.net.
View 6 Replies
Dec 9, 2011
in VB.NET i have 2 custom controls, one is a TextBox and second one is a ComboBox.These have custom values like Bool _IsHidden and are added on runtime to a form.Now, at some point in the code I want to check if the _IsHidden is set to True or False and display that information. Since the user can edit this values when creating the control these are not set on creation.
So what I tried is:(all of this is on MDI Forms)
For Each frm as CustomForm in Main.MdiChildren If frm.MyName = calledBy Then 'this part is just to know which form called the form to create the object For Each cntrl as CustomTextBox in frm.Controls'DO Something
Next End if Next
Now.. if the first control is a custom ComboBox it thorws an error since it sees that it does not match the custom TextBox control..how do i get around this? By my understanding it should just go through all of the controls on the said form and just check those who match CustomTextBox control ?
View 2 Replies
Nov 24, 2011
I've created custom buttons in a .dll and they work fine, so I thought I'd have a go at creating my own sort of listbox to replace the standard one in my applications. It's basically a panel with a few labels and a button (eliminating the need to select an item in standard listbox then click a seperate button). I want to add these panels to a panel on a form, at run-time, based on rows in a db.
If I try adding any arguments in the New() section of the class file it won't let me use the panel in my toolbox. Is there a way to pass arguments to custom controls, I need a new custom panel for each row in a db so need to pass an id to it to specify records; or even load the records in my application and create a new panel for each record, using info passed to it to fill in the labels on it. Or can I create the panel at run-time and refer to labels within the custom controls, setting their .text properties that way?
View 5 Replies
Mar 19, 2011
I would like to expand my knowledge of VB.NET and was looking at creating custom user interfaces or custom controls. The type of things I am thinking of is: [URL]s. How are those controls created? I imagine it involves using the existing controls in Visual Studio as a starting point, and altering them to suit your design?
View 2 Replies
Nov 3, 2009
Is there a way to use SVG in vb.net to draw custom controls? Or any other way?
View 3 Replies
Jun 19, 2012
Is it possible to have a custom control (inherits from Control) and add sub-controls to it (like, a label for example)? Basically I want a composite control. I know controls can contain other controls, but if I try to add a control to MyBase.Controls, this doesn't work because that's readonly.
[Code]...
View 2 Replies
Oct 14, 2011
i need to create custom controls for my apps so how can I do that? Do I need a special software to do that?
View 3 Replies
Jan 16, 2012
inherit from two classes in VB.net?We are developing Custom User Controls that inherits from say System.Web.UI.WebControls.Label. We are planning on implementing a bunch of these controls but they will share mostly the same additional properties. We are hopeful about centralising these properties.I have looked into interfaces but it seems they only 'contract' properties you need to implement.
View 2 Replies
