IDE :: Form Components In Controls Magically Resizing
May 31, 2011
I have a development system and two test systems. My development system is Windows 7 (64 bit). My two test systems are Windows XP (x86) and Windows 7 (x86). I have created a program on the development system mostly in VB.NET 2008 and deployed it. It looks nice on the development system and on my Windows XP system, but when executing the software on my Windows 7 (x86) system, all the form sizes and components somehow grow. To investigate the issue, I moved over the entire project and opened it on the Windows 7 (x86) system to find that the sizes have somehow changed in the designer there as well. I opened up the .Designer.vb files and the sizes there all seem correct. Then I go to the IDE and the sizes are larger than they should be. For example, I will set a form size to 532, 217 on my development PC then it will show up as 709, 267 on the test system. I tried putting in code on my form.load event to set the size to 532, 217 then re-deployed it, but again, it executes and the form is too large.
View 4 Replies
ADVERTISEMENT
Oct 28, 2009
I have developed a application in vb.net(2005). I need to resize a form with others controls when I dragging or resizing from size.
View 2 Replies
Dec 23, 2010
I have a form that sits on the user's desktop. It's only purpose is to display specific information about the computer. The layout is basically setup like this:
[Code]...
I want to be able to give the user the option to display whatever data they choose. In doing so, I'd like the form to resize itself based on the how many labels are in the form and for the labels to align vertically.
Can anyone point me in the right direction? For the form, I was thinking I could get the location of the last label and offset it's size by the location, or something similar.
View 2 Replies
Mar 20, 2011
Where is the best place to resize a control on a form when a form is resized?....I'm currently using the Form1_SizeChanged event and seems to work ok. Also is there any need to check in the forms resize event if the form is in a minimized state before resizing controls?.,.. in VB6 if you try to resize a control when the form is minimized you get an error, but I don't see that happening in BV10 Form1_SizeChanged event, does VB10 automatically ignore resizing controls when a form is minimized or something?
View 2 Replies
May 6, 2012
I have developed a windows application on a size of 1366,768. When i have opened the application on another pc, the location of the controls are not the same anymore. Part of the application can't be displayed as well. How can I handle that in vb?
View 1 Replies
Dec 4, 2011
How do I get my Form1 to resize so that all the (components) buttons and datagridview, etc. stretch and grow with the screen, but stay in their relative positions? I've tried adding Panels around the elements and docking and anchoring, but, so far no success. Elements scatter and don't hold their position, etc. Is there an easy way to do this?
View 3 Replies
Jul 12, 2010
i have created a windows form that has some labels, lines , buttons and i have enabled autoscroll property to true. i am having trouble with relocating and resizing of the controls with resizing of form and change in screen resolution.i have used a code liike dim tmpctrl as control
for each tmpctrl in me.controls
tmpctrl.setbounds((tmpctrls.location.x/X)*me.width, (tmpctrls.location.y/Y)*me.height, (tmpctrls.size.width/X)*me.width,(tmpctrls.size.height/Y*me.height))
next
now as my form is a scrollable form.and the total window portion with respect to which i want to resize n relocate. m having trouble in choosing X , Y in the above code.
View 5 Replies
Jan 9, 2012
I would like to create a new form within my project that is identical in terms of the controls and components of one of my existing forms. The difference will be in the code where I will change some constants.
Is there a way to copy the controls and components(text boxes...) so that I don't have to use the design mode to create the form again?
I've tried copying the code of the original form and pasting it into the new form, however it only pastes the code and not the actual buttons and texts boxes.
View 3 Replies
Apr 19, 2011
Possible Duplicate: Best Free Controls for .NET For many usages, for many developers, (including me) it's required to use free (Win or web) components in their projects. Sometimes they doesn't work correctly.
View 2 Replies
Sep 6, 2009
I have a listbox and a panel. In my forms resize event, my listbox is always form1.width * 0.5 and then the panel is also, but it doesnt work very well. They overlap at a certain point but in theory, they never should. Is there something wrong with my logic?
View 1 Replies
Feb 12, 2011
we all know how to dock or anchor controls so that they resize themselves accordingly when a form is resized. It works fine till we have rows of controls on left and right size of the form. But what if have three columns (Columns as in visual sense. I'm not talking about any column control containing other controls) of controls? For example a form having a bunch of controls in the left side, a bunch in the middle and a bunch in the right. There may be a few more bunches in the middle. Now while resizing the form, I want the controls to resize accordingly as well as change their positions to make space for the previous bunch of controls that are resizing.
I mean, while the user increases the form size horizontally, the controls of the second bunch should resize and at the same time they should move right because the controls of the first bunch are increasing horizontally too. When the user decreases the form size horizontally the same thing should occur in the reverse order. I can manage it somehow using nested split-containers but that's too cumbersome. I would like to know if there's some better way to achieve it, like setting some property etc.?
View 2 Replies
Dec 10, 2010
I'm not going to post my code for my transparentlistbox class, but here is a link to it.It's been working fine as is, until early this morning when I tried to set a different size.[URl]..For the longest time I placed a normal listbox control on a form and resized that, setting a new public variable of transparentlistbox to the same size/location as the original listbox, setting the visibility of the original to false, and adding the transparentlistbox to the form (me.controls.add).It looked like this:
[Code]...
Now, since I've moved some buttons around on my main form, I resized the original listbox control to be wider (same height though). When I tested, the transparentlistbox (code didn't change still set to original listbox size/location), the size was that of what I had the original listbox set to, before resizing?
So, I commented out all of the custom drawing/paint events/etc I could find for the transparentlistbox and tested, still stuck to the original size. I stepped line by line debugging and verified that transparentlistbox1.size=listbox1.size indeed matched the new resized size (but didn't actually resize)?
Last I did was comment out the transparentlistbox.visible and put back the listbox1.visible and listbox1 does indeed show with the new resized size? I'm not quite sure what to test next?
View 2 Replies
Jan 18, 2010
I have a windows form with a groupBox and several controls ( textboxes, checkboxes, one grid, labels ) in the groupBox. I want to make the form resizable , such that the controls would resize themselves when the form is resized instead of overlapping each other.I tried docking and anchoring in several ways, but I am not able to achieve this.
View 2 Replies
Oct 25, 2011
Which is less resource-intensive (per se):
> Add controls/components (such as Performance Counters, Timers, etc.) to a project by dragging them onto the form and using them by setting the properties and using code to program what they do.
> Add controls/components (such as Performance Counters, Timers, etc.) to a project by using Dim x As New Performance Counter or Dim y As New Timer in code without actually dragging them from the Toolbox onto the bar at the bottom (under the Form Design).Or is there another way to do this that uses less CPU/RAM/Resources/etc.?
View 3 Replies
Oct 18, 2011
I have two controls inside a user control. They are set to be anchored left and right in order too size with the window as it changes size. For some reason I'm having tons of issues getting this to work properly.
Particularly, when ever I build the project and the control reloads itself, these controls triple in size, and extend way off the control. If I re size them and repeat the process it happens again! Anyone have this issue or know what might cause it?
View 1 Replies
Jun 17, 2011
I have a basic windows form. I have one command button of the default size right in the middle of the form. I also set the anchors for the command button to keep it in the center when the window form is resized.The issue is when I maximize the the window form the command button remains in the center, but it has grown in size tremendously (almost taking up the entire form).I want to keep the command button centered when the form is maximized, but I also want to keep it the same size. Is there a property for the command button I am overlooking which will do this?
View 1 Replies
Jul 24, 2009
I have two DataGridView controls, with three buttons in between them vertically, in a VB 2005 form that need to be resized and moved around on a form resize.
The code below works, and does what I want. It takes the difference between the new size and the default size, splits the height difference between the two DataGridViews, and moves things around correctly.
What bugs me about it is that I've hard-coded the defaults into the ResizeEnd handler. How would I go about passing the default size so that I don't repeat myself?
Even better, is there a way to do it with anchoring, docking, and other stuff, so that I don't even need to write code?
Private Sub dlgShowAssets_ResizeEnd(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.ResizeEnd
Dim defaultWindowSize As New System.Drawing.Size(759, 619)
[Code]....
View 1 Replies
Sep 17, 2009
I have a project running in my old computer. It has panels,textboxes,labels etc. It occupies the full screen when running.I bought a new computer with a widescreen format. When I run this project it only occupies 2/3 of the screen.
What properties of the controls must I use so that I can run this program in any size computer and still occupy the full screen i.e the size is proportionately resized depending on screen size.
View 3 Replies
Feb 14, 2012
I have a code method that I wrote in vb6 that works on every screensize and resolution combo...however vb.net is not letting me do this. Here is what I do. upon form load at program startup I gather all of the data of the controls (height,width,top,left,font
size) prior to the form actually resizing and I store those in a listbox that is not visible. Then when the form resize is called I proportion all of the controls from their old positions versus the new form size.
[Code]...
View 3 Replies
Nov 12, 2009
First off I'm using the Extended Webbrowser control from: [URL]
I use the Webbrowser control to access an ESRI web based mapping solution. When the ESRI map is loaded into an IE browser and the browser is resized then the map control resizing accordingly. When my Webbrowser control is resized the map webpage is not resizing properly.
I don't even know where to start with this problem. Is there some event that's not firing in the website? I can't simply refresh the whole website because the user may have panned and zoomed around. I want to just tell the website that the container control (Webbrowser control) is resizing now.
View 2 Replies
Oct 1, 2011
I deleted a textbox on my login form and when I debug the startup (login) form still has the textbox that was deleted. I tried deleting the form and its components but still this form appears on start up Is. there any way that I can fix this?
View 3 Replies
Jul 28, 2009
I've got a set of controls in a line inside"FollowTableLayoutPanel1", contained within "TableLayoutPanel2".I have them resizing according to the position of the mouse cursor; the closer the mouse cursor is to the vertical centre of the control, the larger the control is. Because FollowTableLayoutPanel1 has its anchor property set to "Top", it recentres itself in TableLayoutPanel2.It is possible for the recentring of FollowTableLayoutPanel1 to move a control one pixel further away from the mouse pointer, which causes the control to shrink, which causes FollowTableLayoutPanel1 to recentre, placing the control closer to the mouse pointer, which causes the control to grow,which causes FollowTableLayoutPanel1 to recentre, which moves the control further away from the mouse cursor, etc., etc., etc.The end result is that the whole setup judders and wobbles, constantly resizing.Full example code is provided below,and can be pasted directly into Form1 of a new project. Positioning the mouse cursor to correctly show the problem is left as an exercise for the reader :
Public Class Form1
Private Sub myInitializeComponent()
Me.components = New System.ComponentModel.Container
Me.TableLayoutPanel2 = New System.Windows.Forms.TableLayoutPanel[code].....
View 1 Replies
Oct 30, 2009
I'm trying to create a form with a lot of repeated components. I'm making a touch screen control system with a GUI in VB.net. I would like to make it so when a textbox is pressed a form pops up (form1.show()?). This form is basically a number pad. The user can press buttons (0-9) to get the desired integer to appear in a text box in the popup form. When the user presses an "Enter" button, the popup form returns the integer value that was entered to the initial textbox pressed.
View 2 Replies
Jun 9, 2009
I want to dynamically add some lables and progress bar on form and then set the values for it.
[Code]...
i'm setting on error on line where i'm setting the location of x and y. if i remove those lines it works but all the progress bar are shown at same location. Also i want to set the values of progress bar, i was trying this me.controls("Pbar1").value = 100 or PBar1.value = 100 but it doesn't work because in 1st case it doesn't know the control is pbar and in 2nd case it says PBAr1 doesn't exist and won't make the build.
[Code]...
View 4 Replies
Apr 22, 2012
I have a form that looks like this:and i'm using a backgroundworker to update the components:
Code:
Private Sub btnGO_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnGO.Click
[code].....
View 2 Replies
Dec 17, 2009
I have a form with about 50 controls on it. labels, check boxes, combo boxes. text boxes and so on. Now I have a image on the back ground of the form and have made the checkbox text with transparent back ground so the picture can show through. the problem is that it is so slow to load. I see each one appearing on the form one by one. I have tried this on multiple machines and it does it on all of them. I have tried making the checkboxes not transparent but it still is slow.
how can I allow the form to load completely before it displays it. This is the initial form that loads and shows up.
View 3 Replies
Sep 11, 2011
My full screen sized Form is locked in size when I reduce it in size by clicking on the "restore down" [ie] not to the minimized size. I mean "locked in size" by I cannot for instance "grab" it on a corner and to increase or decrease its size. I suspect the control is in the properties window but I cannot find it.
View 4 Replies
Nov 28, 2009
I need a 3d loader (I do not care if it is 3ds,collada or sth else), because I search and I find only c code for opengl until now. Has anybody done this?
View 5 Replies
Sep 18, 2010
My form keeps resizing after debugging. FormBorderStyle is FixedSingle and AutoScaleMode is None...what am I missing?
View 2 Replies
Apr 26, 2011
I want to prevent from resize of form. I set false MaximizeBox and I set FormBorderStyle to FixedSingle. I couldn't change the MaximumSize of form at runtime. If the user double click on the Tiltebar of the form the form resized. I couldn't prevent that
Then I write the following code at size changed event
If FormLoaded Then
Me.MaximizeBox = True
Me.WindowState = FormWindowState.Maximized
Me.StartPosition = FormStartPosition.WindowsDefaultLocation
Me.Size = InitialSize
Me.MaximizeBox = False
End If
View 8 Replies
