Hoping for some advice, probably an easy question for most people on here but I'm a mere learner. Basically, what would generally be the reason for using a Data Set via adapter rather than just connecting to the database directly using an SQL connection?
View 2 RepliesHow to direct put (without someone key in) the data into the database with VB? The data will automatically generated by the program..
View 5 RepliesI'm currently coding an ATM system in VB, and when a user picks a card to 'log on' with, they have 3 attempts to log on before the card is confiscated. The card numbers are in a combobox (which are retreived from an SQL database using the DataAdapter), and each card has a boolean 'confiscated' field in the database.
[Code]...
I recently switched to V.Studio 2008 and using VB. I can not find in the data toolbox the connection and data adapters. Should I do something else to make this appear so I can drag them in my form.
View 2 RepliesconnectionString="Data Source=########;Initial Catalog=DowntimeD51;Persist Security Info=True;User ID=#######;Password=########;Connection Timeout=120;Encrypt=False;TrustServerCertificate=False;Network Library=dbmssocn" I have the above connection string in a vb windows application , This is part of my app config file.
I then have a number of table adapters for connecting my business logic to the database , One of the queries inparticular is a pretty large one and requires extra time to complete however the connection is getting a timeout error. When I checked the adapter connection with Dim connection2 As Int32 = Adapter1.Connection.ConnectionTimeout This shows the connection time out to be 120 seconds but the timeout is still occuring after 30 seconds.
I have a Windows application that uses typed datasets. When setting up the datasets, Visual Studio asks if you want to remember the connection.
Before filling the dataset, I programatically change the connection string of each table adapter so that it will connect to the remote database. Before this operation, it is set to the local database since that is the one I am developing on.[code]...
I'm trying to use variables in my connection string to a table adapter. The only clean cut method I've seen is the following, however, I'm getting "Invalid Connection string" upon run-time. I'm assuming maybe this can't be done?
Private Sub adaptertest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'BCPM_DDBODataSet.LTC_FBS' table. You can move, or remove it, as needed.
LTC_FBSTableAdapter.Connection.ConnectionString = "Provider=TDOLEDB;Data Source=TDDEV;Persist Security Info=True;User ID={0};Password={1};Default Database=bcpm_ddbo;Session Mode=ANSI;"
Me.LTC_FBSTableAdapter.Fill(Me.BCPM_DDBODataSet.LTC_FBS)
Is this possible? Currently I'm using a login form that passes txt box values to string and then use as variables in the hand coded connection string (for each query) is there a way to use this with a table adapter? something similar to how access remembers your login credentials when accessing an ODBC table? I've tried editing the connection string in the config file, but says it's invalid every time. I'm only using the table adapter to populate my form after running a hand coded search query.
This is what i use for manual insert/update/delete query
Private sConStrFormat As String = "Provider=TDOLEDB;Data Source=TDDEV;Persist Security Info=True;User ID={0};Password={1};Default Database=bcpm_ddbo;Session Mode=ANSI;"
[code]....
I have a table with a blob field that stores photos in jpg format. Is there any way to direct fill the Dataset with the OracleDataAdapter?
Like:My code in vb.net
Dim oAdp As OracleDataAdapter Dim v_oDs As DsSubRegistro <- My Dataset
oAdp = New OracleDataAdapter(myConnection.sqlCmd("SELECT * FROM ..."))
With oAdp.TableMappings.Add(Common.DbDataAdapter.DefaultSourceTableName, v_oDs.Foto.TableName).ColumnMappings
[Code]...
when i try to insert data from database into dataset using data adapter, it takes long time, i want to use hourglass but i'm confused how or when i type the code so user will know that application still work.
View 1 Repliesi am trying to join 2 tables together and display them in a list view. i have this code so far
[Code]....
I have a windows form program that pulls data from a sql server. That same data is being read from a ASP.NET website that sets properties for the site. The SQL server has 3 tables: tblWebPage, tblObjects, tblProperties. and 6 views for the 6 web page: vWebPage01, vWebPage02, vWebPage03..ect. When the program loads you see buttons for each web page on the site. When the user clicks on the Home Page it loads this data: [code]Now, the problem lies in updating vWebPage02, vWebPage03, ect.. I assume with the same data I can copy my form with the code and change the form name and the data set to build and update. So that's just what I did changed the form name where needed and changed "vWebPage01" to "vWebPage02".When I tested the program My "vWebPage01" form it built and updated no problem. when I went to test "vWebPage02" it built the dataset and table adapter fine but it did not update at all.
View 1 RepliesGetting data from csv. Works fine and has done for ages. Problem is when data is in the form of 'SS01' up to SS09. datatable shows as 1.000 for SS01...Any other data is read fine.
Dim Conn As System.Data.Odbc.OdbcConnection
Dim da As System.Data.Odbc.OdbcDataAdapter
Dim strConnstr As String
[code]....
Does this work the way I think it should?
Private _adapter As New SqlDataAdapter("Select CaseId, CaseNum, DateLoaded, Status1, DateDiff(mm,DateLoaded,GetDate()) as mm From Case_T" _
& ";Select CF.CaseId, CFV.VendorId, CFV.DueDate From CaseFileVendor_T CFV Left Join CaseFile_T CF on CF.FileId=CFV.FileId" _[code]....
i know this question was asked a couple of years ago by TheMinistered .. but i cannot find an answer, and i have exaclty the same problem (using both VB6 and VB.net 2003) :
When I attempt to connect to a remote SQL server via ADO it takes almost 20-30 seconds before Open returns. I don't know if it's something I'm doing wrong... here is my connection string/code:
Private Sub Class_Initialize()
Dim strConnectionString As String
Set m_objConnection = New Connection
[Code]......
i'm using vb 2008 and local database sql server compact 3.5 to build a application.the problem is that i can't insert a new data to the database from the app. i'm wrote the query right at dataset and using table adapter. but when i call the query, it succeed but the data don't exist at database.why when i add data, it's not working. actually when i run it, it says that adding process is success, no error, and it shows at the datagrid. but when i look at database. the data that i add is not there.and in tableadapter, i also make sortData, seachData query, i can use both of them perfectly when i run the app.so, i really confuse why is the insert query didn't work.
View 2 RepliesI'm confused with this piece of code listed below. This code calls the update method of the dataadapter object to save the changes made to the dataSETback to the database itself. What I don't understand about this code is that it creates an update command(cmdUpdate), insert command (cmdInsert) and delete command (cmdDelete). My understanding is that the update method saves the changes back to the database. So I don't understand why the author creates these additional commands.
View 6 RepliesData Adapter on VB.NET. I'm having a problem with retrieving data on different tables.
Example database: BookInfo[INDENT]BookID: HSD993Z
Title: Introduction to SQL[/INDENT][INDENT]BookID: LDJA293
Title: Advance Computer Programming[/INDENT][INDENT]BookID: KSKL194
[code].....
[code]when I run my program and press this button Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles exceptionsButton.Click..I have my date range within a time that I know that my dataset should produce a result, but when I put a line break in my code here: adapter.Fill(ds)and look at it in debug, I show a table value of 0. If I run the same query that I have to produce these results in sql analyser, I see 1 result. Can someone see why my query on my form produces a different result than the sql analyser does? [code]I can also verify that the variables are passing the correct values. Can anyone please assist as to why this isnt working?
View 1 RepliesI have the following
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[Code]......
I have the following code:
Code:
Imports System.Data.SqlClient
Public Class Main[code]....
and when I run my program, I have my date range within a time that I know that my dataset should produce a result, but when I put a line break in my code here:
Code:
adapter.Fill(ds)
and look at it in debug, I show a table value of 0. If I run the same query that I have to produce these results in sql analyser, I see 1 result. Can someone see why my query on my form produces a different result than the sql analyser does? Also here is my schema for my two tables:
Exceptions
employeenumbervarcharno 50 yesnonoSQL_Latin1_General_CP1_CI_AS
exceptiondatedatetime no8 yes(n/a)(n/a)NULL[code]......
I have an application in which i have to load the grid using MS Excel and save that excel to Sql Server.
View 2 RepliesHonestly I do not understand why I need to write code to update a databse and why it stores it localy. I'd simply rather the system update the individual row after it is scrolled off of.
In either case since I guess I can't do that.
Here is some code in a button on a form
Try
ItemsTableAdapter.Update(NewCreationsDataSet1.Items)
LineCodeTableAdapter.Update(NewCreationsDataSet1.LineCode)
Catch ex As Exception
[Code].....
I have been struggling with the construction of an Access connection string. Here's the problem.My Visual Basic 2008 project is located in a disk partition on my hard drive that I have named S:. My Access MDB file is in the same location.When I deploy the application it obviously will not be in an S: drive on the user's machine. My concern is that if I construct the Connection String using the file designations on my computer as:
(Provider =Microsoft.Jet.OLEDB.4.0; Data Source =S:MyApplicationmydatabase.mdb; User Id =admin; Password =
The deployed application won't know where to look for the data file. I know there are some shortcuts that will allow me to construct the connection string, but I do not know either the designated names or where to find them.
I have created a very simple Visual Studio .net 2002 VB# program. It consists of form1 containing a DataGrid bound to an Access 2007 Database using OleDbConnection1, OleDbDataAdapter1 and DataSet11.The location address of the Database will change based on the user so, I need to make the connection string variable. Problem is inserting the following string variable "source=" & strFileLocation & ";" creates a fatal error
View 1 RepliesI have a little problem with checking if a sql connection is good.
Attached here i have a simple vb.net program that should check if the sql connection to the sql server is good. If i just run it once it works very well. But if i use it in a timer and check the connection to the sql server every 10sec it will only tell me that the connection is good (V=0).
I have tested the code with turning of the sql server service.
Dim connect As String = "Server=192.168.1.2;Database=Test;User ID=sa;Password=12345;Trusted_Connection=False"
Dim sqlconnection As New System.Data.SqlClient.SqlConnection(connect)
[Code].....
I get an error using the connection string (url...) to connect to my SQL CE saying that "Provider 'Microsoft.SqlServerCe. Client.3.5' is not registered in the local PC.".In my project I have a table connected (with the wizard) to the same database and it works fine, but when i try to connect with my own code it FAIL. [code]
View 1 RepliesI have a problem with the connection to my database. It's on a remote server, and this is my code:
[Code]....
I'm connecting a MS-SQL remotely with VB2008 Express.I defined two different methods - the first one is copied from my old VB6 application, which is working perfectly.In this application, the retrieved data is added to a listview control, not datagrid!
Code:
Dim myconn As ADODB.Connection
Dim MyRecSet As ADODB.Recordset
myconn = New ADODB.Connection
[code]....
The SQL query contain several table, thus I used a "*" instead for the table name- not sure this is correct?
Code:
da.Fill(ds,"*")
In our application we use IDataReader which actually call function from one.dll where weExecureDataReader()
We have many calls in application and in some places For some reason I am getting error message "DataReader already open" but I am not sure where.What will happend if I simple close that conection in the that .dll? Am I going to make trouble to database because one datareader left opened? I assume closing connection will close reader too and gargage collector will manage that left opened datareader..