I have been banging my head against a brick wall for 2 days on this one. Someone please help, I am sure I am doing something stupidly wrong.I have a stored procedure that accepts 2 inputs and has 4 outputs. The SP checks the users database against a given username and password.
[Code]...
i am trying to find examples of getting data back from a stored procedure that has no parameters sent to it nor has any returned output parameter. Though it does display data.How can i get that from my code im using below?
Dim myCommandSQL As New SqlCommand
Dim myReaderSQL As SqlDataReader = Nothing
Dim intX As Integer = 0[code]....
The @return_value i just put there to see what would happen but i got nothing returned.
in my SQL 2005 database I have defined this stored procedure:
CREATE PROCEDURE [dbo].[CheckOrders] (
@PK_Customer uniqueidentifier,
@Amount bigint OUTPUT)
[code]....
When I check the value of nAmount it stil contains the original value -1 the output value didn't return from the stored procedure although the number of records updated is 0 or more. The procedure was checked, it works and there are records updated and the value of @Amount is SET to a value 0 or more. I just don't get the values back. eventough the parameter @Amount is defined as OUTPUT. I also tried with outParam.Direction = Data.ParameterDirection.InputOutput instead of outParam.Direction = Data.ParameterDirection.Output . Same result. How do I get the value back from the stored procedure?
How would I use a value from an output parameter from a stored procedure in a vb 2005 application. I would like to capture a run date from the procedure and show it on several forms in the app.
View 2 RepliesOutput Parameter For Stored Procedure Failing?
View 2 RepliesThe mSSQL server I have a stored procedure. That does not have an output parameter.When I run it in SQL Management Studio so the procedure will output 1 cell.
EX:
create procedure [000].[test]
as
[code].....
I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them i.e.:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between '10/3/2010' and '10/10/2010'
Here is my code for the form that will be passing the variables payPeriodStartDate and payPeriodEndDate to the stored procedure:
Code:
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _
"dateadd(dd, ((datediff(dd, '17530107', MAX(payrolldate))/7)*7)+7, '17530107') AS [Sunday]" & _
"from dbo.payroll" & _
[Code] .....
And lastly since I'm calling those variables payPeriodStartDate and payPeriodEndDate, I assume that my sql query will have to change as follows:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between payPeriodStartDate and payPeriodEndDate
Is that correct?
I am using a stored procedure to add simple data to my db. My problem is if I want to add multiple items at the same time, I find myself calling the sp over and over again. This seems as though it is not the right way. I want to be able to pass multiple values to my stored proc.
I want to add say a persons name. I would like to capture the data I need into a block var such as name(x) and pass that to my procedure and in my procedure write as many fields in as I need.
I have an sp that takes my var name and adds it to my table. I do not want to call this procedure 300 times if I want to add 300 names etc. I would like to pass the whole block name() and all 300 at a time and in my sp write each like
name(0)
then write
name(1)
I have a very simple stored procedure built in SQL Server 2008 that looks like this.
CREATE PROCEDURE [dbo].[usp_delBannedIP]
-- Set Required Parameters
@RowID int,
[code].....
My stored procedure:
[Code]...
So my idea is to have (in my VB.net project) a string that could dynamically change the stored procedure "Future"
We connecting a stored procedure in a crystal report.
In the query analyzer we can call the SP with: execute test 'example'
If we run the crystal report we get the possibillity to fill in the parameter for this SP. The report looks fine but how can we send this parameter in the crystal report script??
This is my stored procedure
[Code]...
I have an app written in vb2005 that allows users to search a sql database for a store name. Once a store is selected, it then presents the user with 12 different tabs, each with a DataGridView showing various bits of info about the store. It's a large and convoluted database, so I'm using stored proceedures to pull the data for each tab. Here's a sample of one of the subs that populates the tabs.[code...]
Now, this works just fine to populate the grids on the tabs, and the same code is copied into each of the subs that fill the grids (changing the stored proc, parameter and grid names, of course). The problem I'm having is how to move changes made to the data in the grid back into the database.
I have stored procs that do this (and the procs do work), I just can't seem to figure out how to trigger the stored proc when the user makes a change.
If it matters, there is only a grid on each tab, I did not use a binding source as I am trying to keep an abstraction layer between the data and the app. I did create a dataset, which is how I gain access to the stored procs, but I left the grids unbound and (as seen in my code) bind them at run time.
I have a stored procedure on an oracle database called : GET_HVE_PACKAGE_VERSIONS This basically calls versions of PLSQL packages as stores the versions into a table. I am having big problems trying to call this procedure. I have tried everything. I am currently able to create and update etc etc using the executeNonQuery method and I thought that I would be able to call a procedure them same way, obviously not
the whole project depends on me being able to call procedures against the database.
[Code]...
I have a stored procedure (SQL Server Express) that returns a count of records:
SELECT COUNT(AdminUserID) AS CountEm
FROM Licenses
WHERE (AdminUserID = @AdminUserID);
Table "Licenses" has a field "CompanyID" which is a uniqueidentifier.
I need to add a clause to the WHERE to exclude records from the count where "CompanyID" is null/empty.
In VB code I'd do this with "If Not (TheCompanyID.Equals(Guid.Empty)) Then"
How would I do this in a stored procedure?
I have created a search form based on my SQL database to search for individual records based on 3 types of criteria. The form is up and running but I want to be able to add some more code. I have assigned Stored Procedure to each click event for each button. What I wantr to be able to do is after value is added to text box and button is clicked if there are no reults to display than a message box is displayed with adequate message detailing this. Also is it possible to add a count of records to the form. Once value has been enetered ij tyext box and stored procedure runs and fills dataset with required data can I display a box to show number of records from this search.
[Code]...
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
The store procedure which give me the information I need is:
USE [UCSMIS]
GO
SET ANSI_NULLS ON
[Code].....
When I try to add it to my report it gives an error, is it because of the temp table and how should I go about it?
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
I have a states separated by commas and would like to query it out from stored procedure, how can i do it? let me explain below.
The normal query is:
CODE:
But in my procedure, the procedure as below and the @State value as
CODE:
The procedure above does not work because when I run the state list as
CODE:
If I change it to single quote, it error. how do you do it?
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?
View 2 RepliesI have noticed the following but unable to understand why.Whenever a procedure is called in .net it takes more time than when it is called subsequently.Even if a procedure is called after some interval it takes more time than it takes if it is called quite frequently. i am not asking about sql query or sql command. any user definded function or user defined method takes much more time to finish when it is called occasionaly. but when the same procedure is called quite often it finishes a lot faster. why?
View 1 RepliesI am currently building an ASPX webpage for internal use. Basically, there are two buttons on this page and I need each one to kick off a different stored procedure on our local SQLServer based on the needed task. these stored rocedures do quite a bit of work and take 3-5 minutes to finish running. In neither case do I need any kind of gridview or other output from these stored procedures, as they are simply crunching/cleaning data that will populate some tables that the user will then use to complete their task. There are also no inputs or parameters needed.
So i'm OK at ASPX and pretty good at SQL, but have no idea on the VB code behind page. This is what I have ben able to put together based on 3 days of googling. i think i am close but can't quite get across the line.
CODE:
I'm not sure if you need to see any of my ASPX or my SQL. both work fine on their own, but i am not able to get these buttons to work.
I have a stored procedure that when I run it within my application it times out, but when I use Management Studio and pass in the same exact parameters, the stored procedure executes under a second. I had this exact same issue with the same stored procedure before, and all I did was recompile it, and it fixed the problem, but I do not want to keep having to recompile this stored procedure every few days or so. Has anyone else ran into this issue before?
Another note I would like to mention, is that I'm currently working on a test database, so I'm not inserting, deleting or updating any of the records that the Stored Procedure is using. So the database itself is not changing, but for some reason the Stored Procedure is showing degradation, and at the most we have 2 users in the database at a time.
Below is the code I use to call the Stored Procedure from my app.
cmd.CommandText = "sp__RECAP_SELECTION_GET_GRID_RECORDS_RECAP_TYPES"
cmd.Parameters.Add("@FK_KitchenID", SqlDbType.SmallInt).Value = cmbKitchenCustomer.KitchenID_SelectedPrimaryKey
[Code]....
As I mentioned, if I run the Stored Procedure within Mangement Studio, it runs with no problems. Also if I recompile the stored procedure, it runs fine within the app, but after a few days, the stored procedure starts to timeout again within the app and I need to recompile it again.
I am pretty new to VB and I am not sure why this is not working, basically I am trying to run a stored procedure from my web code. The sp runs just fine in SQL, I've tried it several times so I am sure that is not the problem. I don't want to return any results, I just want to see an "ok" statement if it runs and an error message if it doesn't. The code I am using for the lables (warnings and confirmation) is reused from earlier on the same page, the same goes for the validations (valUpload).
[Code]...
I am using SSMS 2008 and VB. I'm a novice VB developer. I am trying to display results of a simple stored proc on my ASPX page. But I get the error below. Here is my code behind for the ASPX page:
>MsgBox(GlobalFunctions.GlobalF.GetDevSQLServerStoredProcedure())
And my code from GlobalF namespace:
Public Shared Function GetDevSQLServerStoredProcedure()
Dim conn As SQLConnection
Dim DSPageData As New System.Data.DataSet[code]....
Where can I find information on creating or how can I create a button to execute a store procedure
View 6 RepliesI am trying to get some data relevant to a stored procedure (or funtion) back from a database using .Net. The first thing I need to be able to do, is get the stored proc from the database and turn it into string format.The information I need is: The return set of columns, tables used within the SP, Stored Procedures called from the SP. The only way of doing this at the moment that i can think of, is though parsing the text and looking for keyword matches.
View 3 RepliesI am a newbie to vb.net and sql server. My responsibility is to build a vb.net function that when a scanner scans an object, it would take the scanned string and call a stored procedure to get a row of data that match that scanned string and pass the data row to an application that would print out a label.below is my vb.net and sql server stored procedure script
1. Do I have to come up with a public class in order to store my row of data to pass it on to a different vb.net application that would take that data row and print out a label?
2. In my stored procedure, how would I return the founded data row to the vb.net function?
Module makeLabel
Public Class AMGCdata
Public fileName As String[code]...........
im trying to search a value with the help of stored procedure But it is not working
Imports System.Data.SqlClient
Public Class frmStoredProcedure
Dim cn As SqlConnection
[code]....