Sql - Getting Parameter For A Stored Procedure Inside Another Stored Procedure
Aug 29, 2011
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
I have a 'People' table that has CompleteName, Address, and Phone. I'm trying to look for the Name, and return the Phone number. I would like to use LIKE in the SELECT statement for the name.The code in VB is this:
Using Command As New SqlCommand("SearchPeople", MyConnection) Command.CommandType = CommandType.StoredProcedure Command.Parameters.Add("@Competename", SqlDbType.NVarChar).Value = Textbox1.Text
[code]....
I have another table that looks for ID number, it works great with similar code, except this particular one doesn't return anything.I've tried adding "'%" & Textbox1.Text & "%'" also in WHERE CompleteName LIKE '%' + @CompleteName + "%'So how can I search using LIKE with this? If I don't use stored procedure and using sql commandtext, it works fine.
this is my coding when i run this coding for display the content in textboxes from the database by click event in datagrid. "Procedure or Function 'sp_developer_display' expects parameter '@developerid', which was not supplied."this error will display my sp in sql express is ALTER PROCEDURE dbo.sp_developer_display(
Hey Guys, I have a problem with something that should be pretty simple. I have stored procedure that I pass 1 input parameter and expect 2 output parameters back. Instead I get this error:
"Procedure or function 'MESSP_Get_PLCKitColour' expects parameter '@KitNo', which was not supplied."
Everyone here has always been such great help, either directly or indirectly. And it is with grand hope that this, yet again, rings true.For clarification sakes, the Stored Procedure is running under FireBird and the VB is of the .NET variety
When I check the value of nAmount it stil contains the original value -1 the output value didn't return from the stored procedure although the number of records updated is 0 or more. The procedure was checked, it works and there are records updated and the value of @Amount is SET to a value 0 or more. I just don't get the values back. eventough the parameter @Amount is defined as OUTPUT. I also tried with outParam.Direction = Data.ParameterDirection.InputOutput instead of outParam.Direction = Data.ParameterDirection.Output . Same result. How do I get the value back from the stored procedure?
I am using LLBLGEN Pro to generate a data layer...some of my stored procs have parameter name as "date"...so this is cauing a problem when I compile in VS2010...I have to go through the class and change the function parameters "date" to "[date]".
Is there a way to inject these changes in LLBLGEN Pro during code generation?
How would I use a value from an output parameter from a stored procedure in a vb 2005 application. I would like to capture a run date from the procedure and show it on several forms in the app.
I have a two part question really. The first part is about a stored procedure I have almost perfectly correct. This stored procedure below currently returns all the rows found in a table. I need to get only one value based on a unique value field in the table. The unique field is called descriptor. So I need to know what I do to modify the current SP to make it look for a unique descriptor value in that field and then hand back the resulting data the stored procedures generates. I am also looking for a code sample in VB.NET that would initiate the call with the correct descriptor parameter handed into the stored procedure and get back the result. My understanding is typically stored procedures generally return an integer to signify success or failure of it executing. Again I need to have the SP perform a query and then act on the data (as it does now) and then hand back the given result to VB. Apparently the VB call is subtlety different when you need a value back.
I create a dictionary in a function which I pass to the function executing the sproc. Dim PParamDict As New Dictionary(Of String, String) PParamDict.Add("sname", name) PParamDict.Add("sdescription", description) PParamDict.Add("sLoggedInID", LoggedInID) PParamDict.Add("sCompanyID", CompanyID)
The dictionary gets passed to the function PParamDict -> ParameterDict Dim dbComm As New MySqlCommand(ProcedureName, PConnection) Dim pair As KeyValuePair(Of String, String) For Each pair In ParameterDict dbComm.Parameters.AddWithValue(pair.Key, pair.Value) [Code] .....
This works as long as the PParamDict.Add statements are in that order. If they're in a different order they get passed as they come in. This is the most ridiculous thing I've ever seen, I'm passing the keys to the MySqlCommand which are defined letter for letter in the sproc.
The mSSQL server I have a stored procedure. That does not have an output parameter.When I run it in SQL Management Studio so the procedure will output 1 cell.
I have one problem when passing value to parameters for Crystal Report Viewer. The parameters are from Stored Procedure which I have defined.
My aim is to accept values from user and display it accordingly. I try to write code as below in Button View Click Event:
[code=language] Dim rptdoc As New ReportDocument rptdoc.Load(Application.StartupPath & "ReportsSummaryAdsRecordBetweenDate.rpt") '@startdate is parameter in stored procedure
[Code].....
But the problem is that Crystal Report Viewer does not accept my passed values and prompt me to input values for @startdate and @enddate in its dialog box.
I am triggering a stored procedure from code inside a form and I am wanting to return any TSQL errors back to the form. I have written code to do it but when I force an error in TSQL for testing, my vb.net code drops to debug mode with "SQL Exception was unhandled" error.
the DGV_currentactivities.CurrentRow.Cells(3).value is a datetime value that is put into a Datagridview via another stored procedure. When I run it in sql, it lists as a correct SQL datetime: 2011-04-27 05:54:51.003, in the datagridview it lists as: 27/04/2011 5:54:51
I would like to pass to values to a stored procedure. I am using a sqlreader to populate a excel sheet. I need the user to be able to select a range, rather that the whole table.
Dim strSQL As String = "sp_im_select_customerdtl" Dim data As String = "" sqlCon.Open()
I have problem here when executing when saving data/ inserting data to db using stored procedure.[code]Waitress_ID is an autonumber field (identity set to yes). the error i get is this : Procedure or function 'WaitressDataSave_SP' expects parameter '@Waitress_ID', which was not supplied (code execution stop at the line ..da.Fill(dt) )as per i know that i don't need to include waitress_ID in my insert query because sql server automaticly assign autonumber.if i debug before the error line, i can see each variable has its content in param , except for the Waitress_ID.[code]fearness means 'looking for mistakes in the future', if only you could always remember that the future is uncertain then you would never try to predict what could be a mistake, and your fearness ends right away.
What i am trying to achieve is relativly simple but for some reason i cannot get it to work. I would like on form loads for the contents of a textbox to set the value of a parameter @CustID and the Stored Procedure to be used to return the result into a DataGridView.My datagrdview1.datasource= "StoredProcedure1" but how to i set the parameter value and tell my app to execute.
VB Imports System.Data.SqlClient Public Class frmMain
[Code]...
I have three ways of adding parameters to my query commented out above. The all seem to return 1781 records (which is all of the records) and will not filter out to what the UserName variable equals which should reduce it to 32 rows.
I use a Console.WriteLine to show that the UserName is indeed my username. But it seems to not be getting passed to the query properly. I tested the Stored Procedure before even starting in on the program, so I know it functions properly. I just don't know what I'm missing from a VB.NET perspective to get the same results into my DataTable.
My IDE is MS Visual Studio 2008.I just want to ask how can I get the result of a store procedure from MS Access using VB.Net and use the result in a Crystal Report.
I have a Windows Application Project that requires this function.
My problem is this (apologies if this is a little long ... hang in there):I can define a function in VB.NET with optional parameters that wraps a SQL procedure:
Sub Test(OptionalByVal Arg1 As Integer _ Optional ByVal Arg2 As Integer _ Optional ByVal Arg3 As Integer
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?