I am using LLBLGEN Pro to generate a data layer...some of my stored procs have parameter name as "date"...so this is cauing a problem when I compile in VS2010...I have to go through the class and change the function parameters "date" to "[date]".
Is there a way to inject these changes in LLBLGEN Pro during code generation?
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
this is my coding when i run this coding for display the content in textboxes from the database by click event in datagrid. "Procedure or Function 'sp_developer_display' expects parameter '@developerid', which was not supplied."this error will display my sp in sql express is ALTER PROCEDURE dbo.sp_developer_display(
[Code]...
Can't seem to figure out why this is not working.
Dim Myspcmd As New SqlCommand("spDataImport", myConnection)
Myspcmd.CommandType = CommandType.StoredProcedure
Myspcmd.Parameters.Add(New SqlParameter("@FileName", Data.SqlDbType.NVarChar, 100)).Direction = ParameterDirection.Input
Myspcmd.Parameters("@FileName").Value = "Import_File.dtsx"
myConnection.Open()
[Code]...
Hey Guys, I have a problem with something that should be pretty simple. I have stored procedure that I pass 1 input parameter and expect 2 output parameters back. Instead I get this error:
"Procedure or function 'MESSP_Get_PLCKitColour' expects parameter '@KitNo', which was not supplied."
I would appreciate some help with this.
[Code]...
Everyone here has always been such great help, either directly or indirectly. And it is with grand hope that this, yet again, rings true.For clarification sakes, the Stored Procedure is running under FireBird and the VB is of the .NET variety
[Code]...
in my SQL 2005 database I have defined this stored procedure:
CREATE PROCEDURE [dbo].[CheckOrders] (
@PK_Customer uniqueidentifier,
@Amount bigint OUTPUT)
[code]....
When I check the value of nAmount it stil contains the original value -1 the output value didn't return from the stored procedure although the number of records updated is 0 or more. The procedure was checked, it works and there are records updated and the value of @Amount is SET to a value 0 or more. I just don't get the values back. eventough the parameter @Amount is defined as OUTPUT. I also tried with outParam.Direction = Data.ParameterDirection.InputOutput instead of outParam.Direction = Data.ParameterDirection.Output . Same result. How do I get the value back from the stored procedure?
How would I use a value from an output parameter from a stored procedure in a vb 2005 application. I would like to capture a run date from the procedure and show it on several forms in the app.
View 2 RepliesI have a two part question really. The first part is about a stored procedure I have almost perfectly correct. This stored procedure below currently returns all the rows found in a table. I need to get only one value based on a unique value field in the table. The unique field is called descriptor. So I need to know what I do to modify the current SP to make it look for a unique descriptor value in that field and then hand back the resulting data the stored procedures generates. I am also looking for a code sample in VB.NET that would initiate the call with the correct descriptor parameter handed into the stored procedure and get back the result. My understanding is typically stored procedures generally return an integer to signify success or failure of it executing. Again I need to have the SP perform a query and then act on the data (as it does now) and then hand back the given result to VB. Apparently the VB call is subtlety different when you need a value back.
[Code]...
I create a dictionary in a function which I pass to the function executing the sproc.
Dim PParamDict As New Dictionary(Of String, String)
PParamDict.Add("sname", name)
PParamDict.Add("sdescription", description)
PParamDict.Add("sLoggedInID", LoggedInID)
PParamDict.Add("sCompanyID", CompanyID)
The dictionary gets passed to the function PParamDict -> ParameterDict
Dim dbComm As New MySqlCommand(ProcedureName, PConnection)
Dim pair As KeyValuePair(Of String, String)
For Each pair In ParameterDict
dbComm.Parameters.AddWithValue(pair.Key, pair.Value)
[Code] .....
This works as long as the PParamDict.Add statements are in that order. If they're in a different order they get passed as they come in. This is the most ridiculous thing I've ever seen, I'm passing the keys to the MySqlCommand which are defined letter for letter in the sproc.
Output Parameter For Stored Procedure Failing?
View 2 RepliesThe mSSQL server I have a stored procedure. That does not have an output parameter.When I run it in SQL Management Studio so the procedure will output 1 cell.
EX:
create procedure [000].[test]
as
[code].....
I have one problem when passing value to parameters for Crystal Report Viewer. The parameters are from Stored Procedure which I have defined.
My aim is to accept values from user and display it accordingly. I try to write code as below in Button View Click Event:
[code=language]
Dim rptdoc As New ReportDocument
rptdoc.Load(Application.StartupPath & "ReportsSummaryAdsRecordBetweenDate.rpt")
'@startdate is parameter in stored procedure
[Code].....
But the problem is that Crystal Report Viewer does not accept my passed values and prompt me to input values for @startdate and @enddate in its dialog box.
i'm trying to execute a SQL stored procedure with a parameter that needs the SQL datetime format as:
Dim str_runproc As String
str_runproc = "exec UP_stopactivity @Activity='" & DGV_currentactivities.CurrentRow.Cells(0).Value & "' ,@Client='" & DGV_currentactivities.CurrentRow.Cells(2).Value & "',@starttime='" &
DGV_currentactivities.CurrentRow.Cells(3).Value & "'"
the DGV_currentactivities.CurrentRow.Cells(3).value is a datetime value that is put into a Datagridview via another stored procedure. When I run it in sql, it lists as a correct SQL datetime: 2011-04-27 05:54:51.003, in the datagridview it lists as: 27/04/2011 5:54:51
how to Pass datatable as a parameter to a SQL Server stored procedure
View 3 RepliesI would like to pass to values to a stored procedure. I am using a sqlreader to populate a excel sheet. I need the user to be able to select a range, rather that the whole table.
Dim strSQL As String = "sp_im_select_customerdtl"
Dim data As String = ""
sqlCon.Open()
[Code].....
I have problem here when executing when saving data/ inserting data to db using stored procedure.[code]Waitress_ID is an autonumber field (identity set to yes). the error i get is this : Procedure or function 'WaitressDataSave_SP' expects parameter '@Waitress_ID', which was not supplied (code execution stop at the line ..da.Fill(dt) )as per i know that i don't need to include waitress_ID in my insert query because sql server automaticly assign autonumber.if i debug before the error line, i can see each variable has its content in param , except for the Waitress_ID.[code]fearness means 'looking for mistakes in the future', if only you could always remember that the future is uncertain then you would never try to predict what could be a mistake, and your fearness ends right away.
View 3 RepliesWhat i am trying to achieve is relativly simple but for some reason i cannot get it to work. I would like on form loads for the contents of a textbox to set the value of a parameter @CustID and the Stored Procedure to be used to return the result into a DataGridView.My datagrdview1.datasource= "StoredProcedure1" but how to i set the parameter value and tell my app to execute.
View 29 RepliesVB Imports System.Data.SqlClient Public Class frmMain
[Code]...
I have three ways of adding parameters to my query commented out above. The all seem to return 1781 records (which is all of the records) and will not filter out to what the UserName variable equals which should reduce it to 32 rows.
I use a Console.WriteLine to show that the UserName is indeed my username. But it seems to not be getting passed to the query properly. I tested the Stored Procedure before even starting in on the program, so I know it functions properly. I just don't know what I'm missing from a VB.NET perspective to get the same results into my DataTable.
I have been having a wonderful Sunday trying to figure out Stored Procedures, created via vb.net and input into Sql Server 2008.
I've created a Stored Procedure... That I pass an Integer in a parameter, I want to get back a String.
Here's the vb.net Stored Procedure Code:
Imports
Microsoft.SqlServer.Server
Imports
[Code].....
My IDE is MS Visual Studio 2008.I just want to ask how can I get the result of a store procedure from MS Access using VB.Net and use the result in a Crystal Report.
I have a Windows Application Project that requires this function.
I have a stored procedure which updates a database using the parameters I supply but I'm having trouble passing a NULL to the stored procedure
The field I need to make NULL is a DateTime field
DB.Parameters.AddWithValue("@date", NULL)
This gives me the error 'NULL' is not declared. 'Null' constant is no longer supported; use 'System.DBNull' instead
[Code]...
My problem is this (apologies if this is a little long ... hang in there):I can define a function in VB.NET with optional parameters that wraps a SQL procedure:
Sub Test(OptionalByVal Arg1 As Integer _
Optional ByVal Arg2 As Integer _
Optional ByVal Arg3 As Integer
[code].....
I have a very simple stored procedure built in SQL Server 2008 that looks like this.
CREATE PROCEDURE [dbo].[usp_delBannedIP]
-- Set Required Parameters
@RowID int,
[code].....
Access 2007 and Stored Procedure. I keep getting this error: Parameter [@MyNumber] has no default value.
[Code]...
I have a vb.net project. I have used the GUI and wizard to create a DataSource pointing to a SQL Server Stored Procedure. It works great! However, a new column has been added to the stored procedure.In the GUI if I right click the data source name and refresh, nothing happens.If I right click the stored procedure name and refresh, nothing happens.If I preview data I can see the new column returned.If I choose edit with wizard there is a red exclamation point next to the name of the stored procedure and red X be each column name.
When I hover over the field name it says "Column ABC in the DataSet references a column missing from the Database".When I hover over the stored procedure it says "STORED_PROCEDURE is mapped to STORED_PROCEDURE in the DataSet. Element STORED_PROCEDURE in the DataSet contains columns that do not exist in the Database".I can't figure out how to get the new columnd in the dataset.
I have an existing stored procedure that need to be used now as inline SQL statement in my VB console application. How do I change it?
Stored Procedure:
:Setvar CUSTOMDBNAME "My_DB"
USE [$(CUSTOMDBNAME)]
GO
[Code]..
My app calls for the use of an SP that doesn't return rows from a table, but results based on certain conditions.
View 3 RepliesThe store procedure which give me the information I need is:
USE [UCSMIS]
GO
SET ANSI_NULLS ON
[Code].....
When I try to add it to my report it gives an error, is it because of the temp table and how should I go about it?