Can't seem to figure out why this is not working.
Dim Myspcmd As New SqlCommand("spDataImport", myConnection)
Myspcmd.CommandType = CommandType.StoredProcedure
Myspcmd.Parameters.Add(New SqlParameter("@FileName", Data.SqlDbType.NVarChar, 100)).Direction = ParameterDirection.Input
Myspcmd.Parameters("@FileName").Value = "Import_File.dtsx"
myConnection.Open()
[Code]...
VB Imports System.Data.SqlClient Public Class frmMain
[Code]...
I have three ways of adding parameters to my query commented out above. The all seem to return 1781 records (which is all of the records) and will not filter out to what the UserName variable equals which should reduce it to 32 rows.
I use a Console.WriteLine to show that the UserName is indeed my username. But it seems to not be getting passed to the query properly. I tested the Stored Procedure before even starting in on the program, so I know it functions properly. I just don't know what I'm missing from a VB.NET perspective to get the same results into my DataTable.
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
project, but have decided to take another direction on it, after much and continued struggling.I started out trying to use data binding, but was advised to use straight SQL statements in the code. So what I'm trying to do now: I have 2 forms, frm1 and frm2. frm1 has a combobox, which is showing all the data fine from a table, and an OK button. Upon clicking on this button, I need frm2 to load, correctly populating its textboxes and comboboxes with the corresponding data, based on the selection made on frm1. This is what I have so far:
View 14 RepliesI am confused about how to pass parameters to a stored procedure. The stored procedure is written in sql server 2005 and the code is in vb.net.
I have included the sub that I am working on. I know that my use of parameters is wrong.
Public Sub AddRecipe()
Using myDBconnection As New SqlConnection(setConnstring)
Using SQLcmd As New SqlCommand()
[Code]....
This may not be the place to ask this, if not, you can move this post to the SQL forum but I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them ie:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between '10/3/2010' and '10/10/2010'
and I'd like those values to be
Between payPeriodStartDate and payPeriodEndDate.
I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them ie:
[Code]...
I am struggling with trying to pass values to a stored procedure, I am creating new records on my table by the values are not passing to the table.Here is my persistance class.
Public Function createDMRIssue(ByVal ItemNumber As String, ByVal IssueStatus As String, _
ByVal ProblemDescription As String, ByVal p_AuditResults As String, _
ByVal DMRDate As String, ByVal p_IssueCategory As String, _
ByVal p_DMRInitiator As String, ByVal p_QtyUnacceptable As Integer, _
ByVal p_ProductType As String, ByVal p_OrderNumberm_dmrissue As String)
Me.Connection()
[Code]...
I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them i.e.:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between '10/3/2010' and '10/10/2010'
Here is my code for the form that will be passing the variables payPeriodStartDate and payPeriodEndDate to the stored procedure:
Code:
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _
"dateadd(dd, ((datediff(dd, '17530107', MAX(payrolldate))/7)*7)+7, '17530107') AS [Sunday]" & _
"from dbo.payroll" & _
[Code] .....
And lastly since I'm calling those variables payPeriodStartDate and payPeriodEndDate, I assume that my sql query will have to change as follows:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between payPeriodStartDate and payPeriodEndDate
Is that correct?
this is my coding when i run this coding for display the content in textboxes from the database by click event in datagrid. "Procedure or Function 'sp_developer_display' expects parameter '@developerid', which was not supplied."this error will display my sp in sql express is ALTER PROCEDURE dbo.sp_developer_display(
[Code]...
Hey Guys, I have a problem with something that should be pretty simple. I have stored procedure that I pass 1 input parameter and expect 2 output parameters back. Instead I get this error:
"Procedure or function 'MESSP_Get_PLCKitColour' expects parameter '@KitNo', which was not supplied."
I would appreciate some help with this.
[Code]...
I would like to create a stored procedure that will call any webservice by passing to the stored procedure the webservice name/url and its parameters. I would like this instead of adding web refference each webservice one by one.
View 7 RepliesI have three items in my checkbox list, what I want to do is for the user to select either one of them in any combination and pass these values to my sql server stored procedure which then returns data according to the values passed to it in the where clause and binds this data to a gridview. However, at the moment in my sp I have three I parameters, in the case of the user selecting one item from the list not enough arguments will have been passed to the procedure. I'm not sure how to go about doing this
View 2 RepliesI am trying to pass some declared variables to a stored procedure. Here is my
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _
[Code].....
Everyone here has always been such great help, either directly or indirectly. And it is with grand hope that this, yet again, rings true.For clarification sakes, the Stored Procedure is running under FireBird and the VB is of the .NET variety
[Code]...
in my SQL 2005 database I have defined this stored procedure:
CREATE PROCEDURE [dbo].[CheckOrders] (
@PK_Customer uniqueidentifier,
@Amount bigint OUTPUT)
[code]....
When I check the value of nAmount it stil contains the original value -1 the output value didn't return from the stored procedure although the number of records updated is 0 or more. The procedure was checked, it works and there are records updated and the value of @Amount is SET to a value 0 or more. I just don't get the values back. eventough the parameter @Amount is defined as OUTPUT. I also tried with outParam.Direction = Data.ParameterDirection.InputOutput instead of outParam.Direction = Data.ParameterDirection.Output . Same result. How do I get the value back from the stored procedure?
I am using LLBLGEN Pro to generate a data layer...some of my stored procs have parameter name as "date"...so this is cauing a problem when I compile in VS2010...I have to go through the class and change the function parameters "date" to "[date]".
Is there a way to inject these changes in LLBLGEN Pro during code generation?
How would I use a value from an output parameter from a stored procedure in a vb 2005 application. I would like to capture a run date from the procedure and show it on several forms in the app.
View 2 RepliesI have a two part question really. The first part is about a stored procedure I have almost perfectly correct. This stored procedure below currently returns all the rows found in a table. I need to get only one value based on a unique value field in the table. The unique field is called descriptor. So I need to know what I do to modify the current SP to make it look for a unique descriptor value in that field and then hand back the resulting data the stored procedures generates. I am also looking for a code sample in VB.NET that would initiate the call with the correct descriptor parameter handed into the stored procedure and get back the result. My understanding is typically stored procedures generally return an integer to signify success or failure of it executing. Again I need to have the SP perform a query and then act on the data (as it does now) and then hand back the given result to VB. Apparently the VB call is subtlety different when you need a value back.
[Code]...
I create a dictionary in a function which I pass to the function executing the sproc.
Dim PParamDict As New Dictionary(Of String, String)
PParamDict.Add("sname", name)
PParamDict.Add("sdescription", description)
PParamDict.Add("sLoggedInID", LoggedInID)
PParamDict.Add("sCompanyID", CompanyID)
The dictionary gets passed to the function PParamDict -> ParameterDict
Dim dbComm As New MySqlCommand(ProcedureName, PConnection)
Dim pair As KeyValuePair(Of String, String)
For Each pair In ParameterDict
dbComm.Parameters.AddWithValue(pair.Key, pair.Value)
[Code] .....
This works as long as the PParamDict.Add statements are in that order. If they're in a different order they get passed as they come in. This is the most ridiculous thing I've ever seen, I'm passing the keys to the MySqlCommand which are defined letter for letter in the sproc.
Output Parameter For Stored Procedure Failing?
View 2 RepliesThe mSSQL server I have a stored procedure. That does not have an output parameter.When I run it in SQL Management Studio so the procedure will output 1 cell.
EX:
create procedure [000].[test]
as
[code].....
I have one problem when passing value to parameters for Crystal Report Viewer. The parameters are from Stored Procedure which I have defined.
My aim is to accept values from user and display it accordingly. I try to write code as below in Button View Click Event:
[code=language]
Dim rptdoc As New ReportDocument
rptdoc.Load(Application.StartupPath & "ReportsSummaryAdsRecordBetweenDate.rpt")
'@startdate is parameter in stored procedure
[Code].....
But the problem is that Crystal Report Viewer does not accept my passed values and prompt me to input values for @startdate and @enddate in its dialog box.
my issue could be found simple but I'm founding it difficults in regard of dealing with array concept in oracle and vb.netI will start by showing to you a code done in oracle side1-this script should be executed in hr schema2-create a table and call it job_testas
create table job_test as
select * from jobs
where 1=2
[code].....
i have a stored procedure to insert data into table create procedure insertdata
[Code]...
I have a radgrid bound to a SqlDataSource that includes a hidden, readonly column that stores a pk. I want to pass the value bound to that column to a stored procedure for Updates but the default behavior when the column is readonly is not to pass the parameter to the sqlDataSource. My question is whether there is a way to pass that value without having to go into the code behind. Here is a snippet of my asp markup.
<telerik:RadGrid ID="rgEmployees" runat="server" AutoGenerateColumns="False"
DataSourceID="sdsEmployees" GridLines="None" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true">
[Code]....
If I set readonly="false" on the It works fine but then the user can edit the primary key value which is not desired. I know work arounds in code behind but is there any way to do it straight in the markup?
i'm trying to execute a SQL stored procedure with a parameter that needs the SQL datetime format as:
Dim str_runproc As String
str_runproc = "exec UP_stopactivity @Activity='" & DGV_currentactivities.CurrentRow.Cells(0).Value & "' ,@Client='" & DGV_currentactivities.CurrentRow.Cells(2).Value & "',@starttime='" &
DGV_currentactivities.CurrentRow.Cells(3).Value & "'"
the DGV_currentactivities.CurrentRow.Cells(3).value is a datetime value that is put into a Datagridview via another stored procedure. When I run it in sql, it lists as a correct SQL datetime: 2011-04-27 05:54:51.003, in the datagridview it lists as: 27/04/2011 5:54:51
how to Pass datatable as a parameter to a SQL Server stored procedure
View 3 RepliesI would like to pass to values to a stored procedure. I am using a sqlreader to populate a excel sheet. I need the user to be able to select a range, rather that the whole table.
Dim strSQL As String = "sp_im_select_customerdtl"
Dim data As String = ""
sqlCon.Open()
[Code].....