Passing Value From Stored Procedure?
Apr 8, 2010
project, but have decided to take another direction on it, after much and continued struggling.I started out trying to use data binding, but was advised to use straight SQL statements in the code. So what I'm trying to do now: I have 2 forms, frm1 and frm2. frm1 has a combobox, which is showing all the data fine from a table, and an OK button. Upon clicking on this button, I need frm2 to load, correctly populating its textboxes and comboboxes with the corresponding data, based on the selection made on frm1. This is what I have so far:
View 14 Replies
ADVERTISEMENT
Aug 12, 2010
Can't seem to figure out why this is not working.
Dim Myspcmd As New SqlCommand("spDataImport", myConnection)
Myspcmd.CommandType = CommandType.StoredProcedure
Myspcmd.Parameters.Add(New SqlParameter("@FileName", Data.SqlDbType.NVarChar, 100)).Direction = ParameterDirection.Input
Myspcmd.Parameters("@FileName").Value = "Import_File.dtsx"
myConnection.Open()
[Code]...
View 11 Replies
Oct 12, 2009
I am confused about how to pass parameters to a stored procedure. The stored procedure is written in sql server 2005 and the code is in vb.net.
I have included the sub that I am working on. I know that my use of parameters is wrong.
Public Sub AddRecipe()
Using myDBconnection As New SqlConnection(setConnstring)
Using SQLcmd As New SqlCommand()
[Code]....
View 4 Replies
Jan 6, 2011
This may not be the place to ask this, if not, you can move this post to the SQL forum but I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them ie:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between '10/3/2010' and '10/10/2010'
and I'd like those values to be
Between payPeriodStartDate and payPeriodEndDate.
View 5 Replies
Jan 6, 2011
I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them ie:
[Code]...
View 2 Replies
Feb 28, 2009
I am struggling with trying to pass values to a stored procedure, I am creating new records on my table by the values are not passing to the table.Here is my persistance class.
Public Function createDMRIssue(ByVal ItemNumber As String, ByVal IssueStatus As String, _
ByVal ProblemDescription As String, ByVal p_AuditResults As String, _
ByVal DMRDate As String, ByVal p_IssueCategory As String, _
ByVal p_DMRInitiator As String, ByVal p_QtyUnacceptable As Integer, _
ByVal p_ProductType As String, ByVal p_OrderNumberm_dmrissue As String)
Me.Connection()
[Code]...
View 7 Replies
Jan 12, 2011
I have an application that I'm building which pulls dates from a database. The start value is stored as payPeriodStart date and I add 7 days to get the end date. What I need to know is, is it possible to store those values and pass them to a Stored Procedure? Currently my stored procedures have "static" dates in them i.e.:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between '10/3/2010' and '10/10/2010'
Here is my code for the form that will be passing the variables payPeriodStartDate and payPeriodEndDate to the stored procedure:
Code:
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _
"dateadd(dd, ((datediff(dd, '17530107', MAX(payrolldate))/7)*7)+7, '17530107') AS [Sunday]" & _
"from dbo.payroll" & _
[Code] .....
And lastly since I'm calling those variables payPeriodStartDate and payPeriodEndDate, I assume that my sql query will have to change as follows:
where dateadd (n, Timestamp, '12/31/1899') - ([LoggedIn]/1000)/60/1440+1 Between payPeriodStartDate and payPeriodEndDate
Is that correct?
View 2 Replies
Oct 26, 2010
I would like to create a stored procedure that will call any webservice by passing to the stored procedure the webservice name/url and its parameters. I would like this instead of adding web refference each webservice one by one.
View 7 Replies
Jan 15, 2009
I have three items in my checkbox list, what I want to do is for the user to select either one of them in any combination and pass these values to my sql server stored procedure which then returns data according to the values passed to it in the where clause and binds this data to a gridview. However, at the moment in my sp I have three I parameters, in the case of the user selecting one item from the list not enough arguments will have been passed to the procedure. I'm not sure how to go about doing this
View 2 Replies
Jan 14, 2011
I am trying to pass some declared variables to a stored procedure. Here is my
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _
[Code].....
View 10 Replies
Nov 9, 2011
my issue could be found simple but I'm founding it difficults in regard of dealing with array concept in oracle and vb.netI will start by showing to you a code done in oracle side1-this script should be executed in hr schema2-create a table and call it job_testas
create table job_test as
select * from jobs
where 1=2
[code].....
View 2 Replies
Apr 9, 2012
i have a stored procedure to insert data into table create procedure insertdata
[Code]...
View 11 Replies
Nov 4, 2009
I have a radgrid bound to a SqlDataSource that includes a hidden, readonly column that stores a pk. I want to pass the value bound to that column to a stored procedure for Updates but the default behavior when the column is readonly is not to pass the parameter to the sqlDataSource. My question is whether there is a way to pass that value without having to go into the code behind. Here is a snippet of my asp markup.
<telerik:RadGrid ID="rgEmployees" runat="server" AutoGenerateColumns="False"
DataSourceID="sdsEmployees" GridLines="None" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true">
[Code]....
If I set readonly="false" on the It works fine but then the user can edit the primary key value which is not desired. I know work arounds in code behind but is there any way to do it straight in the markup?
View 2 Replies
May 2, 2012
VB Imports System.Data.SqlClient Public Class frmMain
[Code]...
I have three ways of adding parameters to my query commented out above. The all seem to return 1781 records (which is all of the records) and will not filter out to what the UserName variable equals which should reduce it to 32 rows.
I use a Console.WriteLine to show that the UserName is indeed my username. But it seems to not be getting passed to the query properly. I tested the Stored Procedure before even starting in on the program, so I know it functions properly. I just don't know what I'm missing from a VB.NET perspective to get the same results into my DataTable.
View 1 Replies
Jan 28, 2010
In a nutshell, I am selecting values from a checked box column in a grid view. After checking the boxes I have a function that concatenates each customer number into a string called @CusList to use a parameter for a stored procedure Public Function SelectCusList()
Dim CusShow As String
Dim CusStr As String
Dim CusList As String
CusStr = ""
[Code]...
View 1 Replies
Nov 18, 2010
I have a sql query something like below,
create procedure test
(
@param1 nvarchar(max)
)
[code]....
Now I need to pass the value of @param1 from my .net application in such a way that the above query works.how from my vb.net code i can pass a value which is similiar to below
'1','2','3'
how do I structure value of parameter like above example from my .net application.
View 3 Replies
Sep 11, 2009
The store procedure which give me the information I need is:
USE [UCSMIS]
GO
SET ANSI_NULLS ON
[Code].....
When I try to add it to my report it gives an error, is it because of the temp table and how should I go about it?
View 2 Replies
Aug 29, 2011
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
View 2 Replies
Feb 23, 2010
In a tic tac toe game I am making there are two blocks of code that are identical except that they access different arrays:[code]Arrays plyrTaken and plyrPairs are used in the first block and cmptrTaken and cmptrPairs are used in the second. Is it possible to wrap these blocks into one Sub Procedure passing the different arrays when the procedure is called?
View 5 Replies
Sep 7, 2009
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?
View 2 Replies
Dec 22, 2011
I have noticed the following but unable to understand why.Whenever a procedure is called in .net it takes more time than when it is called subsequently.Even if a procedure is called after some interval it takes more time than it takes if it is called quite frequently. i am not asking about sql query or sql command. any user definded function or user defined method takes much more time to finish when it is called occasionaly. but when the same procedure is called quite often it finishes a lot faster. why?
View 1 Replies
Jan 26, 2012
I am currently building an ASPX webpage for internal use. Basically, there are two buttons on this page and I need each one to kick off a different stored procedure on our local SQLServer based on the needed task. these stored rocedures do quite a bit of work and take 3-5 minutes to finish running. In neither case do I need any kind of gridview or other output from these stored procedures, as they are simply crunching/cleaning data that will populate some tables that the user will then use to complete their task. There are also no inputs or parameters needed.
So i'm OK at ASPX and pretty good at SQL, but have no idea on the VB code behind page. This is what I have ben able to put together based on 3 days of googling. i think i am close but can't quite get across the line.
CODE:
I'm not sure if you need to see any of my ASPX or my SQL. both work fine on their own, but i am not able to get these buttons to work.
View 4 Replies
Feb 10, 2010
I have a form which contain Two textbox control. When I passing the Form to Procedure the textbox controls of the form not getting say I am giving Exaple.
Code:
Public Class Myform
'This Form Contains Two Controls TextBox1 And TextBox2
'Calling the Procedure
[code]....
View 6 Replies
Feb 11, 2010
I am in great trouble. I have a form which contain Two textbox control. When I passing the Form to Procedure the textbox controls of the form not getting say I am giving Exaple
Public Class Myform
'This Form Contains Two Controls TextBox1 And TextBox2
'Calling the Procedure
[code]......
View 1 Replies
Aug 11, 2009
I have a stored procedure that when I run it within my application it times out, but when I use Management Studio and pass in the same exact parameters, the stored procedure executes under a second. I had this exact same issue with the same stored procedure before, and all I did was recompile it, and it fixed the problem, but I do not want to keep having to recompile this stored procedure every few days or so. Has anyone else ran into this issue before?
Another note I would like to mention, is that I'm currently working on a test database, so I'm not inserting, deleting or updating any of the records that the Stored Procedure is using. So the database itself is not changing, but for some reason the Stored Procedure is showing degradation, and at the most we have 2 users in the database at a time.
Below is the code I use to call the Stored Procedure from my app.
cmd.CommandText = "sp__RECAP_SELECTION_GET_GRID_RECORDS_RECAP_TYPES"
cmd.Parameters.Add("@FK_KitchenID", SqlDbType.SmallInt).Value = cmbKitchenCustomer.KitchenID_SelectedPrimaryKey
[Code]....
As I mentioned, if I run the Stored Procedure within Mangement Studio, it runs with no problems. Also if I recompile the stored procedure, it runs fine within the app, but after a few days, the stored procedure starts to timeout again within the app and I need to recompile it again.
View 10 Replies
May 6, 2011
I am pretty new to VB and I am not sure why this is not working, basically I am trying to run a stored procedure from my web code. The sp runs just fine in SQL, I've tried it several times so I am sure that is not the problem. I don't want to return any results, I just want to see an "ok" statement if it runs and an error message if it doesn't. The code I am using for the lables (warnings and confirmation) is reused from earlier on the same page, the same goes for the validations (valUpload).
[Code]...
View 2 Replies
Apr 12, 2011
I am using SSMS 2008 and VB. I'm a novice VB developer. I am trying to display results of a simple stored proc on my ASPX page. But I get the error below. Here is my code behind for the ASPX page:
>MsgBox(GlobalFunctions.GlobalF.GetDevSQLServerStoredProcedure())
And my code from GlobalF namespace:
Public Shared Function GetDevSQLServerStoredProcedure()
Dim conn As SQLConnection
Dim DSPageData As New System.Data.DataSet[code]....
View 1 Replies
Jan 12, 2011
Where can I find information on creating or how can I create a button to execute a store procedure
View 6 Replies
Apr 7, 2010
I am trying to get some data relevant to a stored procedure (or funtion) back from a database using .Net. The first thing I need to be able to do, is get the stored proc from the database and turn it into string format.The information I need is: The return set of columns, tables used within the SP, Stored Procedures called from the SP. The only way of doing this at the moment that i can think of, is though parsing the text and looking for keyword matches.
View 3 Replies
Mar 3, 2011
I am a newbie to vb.net and sql server. My responsibility is to build a vb.net function that when a scanner scans an object, it would take the scanned string and call a stored procedure to get a row of data that match that scanned string and pass the data row to an application that would print out a label.below is my vb.net and sql server stored procedure script
1. Do I have to come up with a public class in order to store my row of data to pass it on to a different vb.net application that would take that data row and print out a label?
2. In my stored procedure, how would I return the founded data row to the vb.net function?
Module makeLabel
Public Class AMGCdata
Public fileName As String[code]...........
View 2 Replies
